RE: [Chevelle-List] Ferrari F1

2003-02-19 Thread John Nasta
Andre, can you get me a discount on one, being that you must know people
over there and all? Can I put $500 down and owe them the rest? Tell them I
would consider it a big favor and I would always owe them one. Oh wait,
maybe it's not a good idea to tell Italians that you owe them a favor,
scratch that idea.

John (half-Italian) Nasta



-Original Message-

OK guys, this is not a Chevelle its the sound of the new ferrari F1 2003

try this link

http://www.humor911.com/innslagID.asp?innslagID=981
Kind Regards

André



-
To Unsubscribe please visit www.chevelles.net/list.html
To start a new topic, send mail to: [EMAIL PROTECTED]



Re: [Chevelle-List] Ferrari F1

2003-02-19 Thread tjgallant
VERY NICE.if only my 454 could sound so sweet!

Trent

- Original Message -
From: Tigergutt [EMAIL PROTECTED]
To: [EMAIL PROTECTED]
Sent: Wednesday, February 19, 2003 12:41 PM
Subject: Re: [Chevelle-List] Ferrari F1


 hahaha, does it sound nice 


 Kind Regards

 André
 - Original Message -
 From: John Nasta [EMAIL PROTECTED]
 To: [EMAIL PROTECTED]
 Sent: Wednesday, February 19, 2003 7:27 PM
 Subject: RE: [Chevelle-List] Ferrari F1


  Andre, can you get me a discount on one, being that you must know people
  over there and all? Can I put $500 down and owe them the rest? Tell them
I
  would consider it a big favor and I would always owe them one. Oh wait,
  maybe it's not a good idea to tell Italians that you owe them a favor,
  scratch that idea.
 
  John (half-Italian) Nasta
 
 
 
  -Original Message-
 
  OK guys, this is not a Chevelle its the sound of the new ferrari F1 2003
 
  try this link
 
  http://www.humor911.com/innslagID.asp?innslagID=981
  Kind Regards
 
  André
 
 
 
  -
  To Unsubscribe please visit www.chevelles.net/list.html
  To start a new topic, send mail to: [EMAIL PROTECTED]


 -
 To Unsubscribe please visit www.chevelles.net/list.html
 To start a new topic, send mail to: [EMAIL PROTECTED]


-
To Unsubscribe please visit www.chevelles.net/list.html
To start a new topic, send mail to: [EMAIL PROTECTED]



RE: [Chevelle-List] Ferrari F1

2003-02-19 Thread Richard M. Pruett
Sounds like the Ferrari I had when I was about 5.

-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED]]On Behalf Of Tigergutt
Sent: Wednesday, February 19, 2003 12:57 PM
To: [EMAIL PROTECTED]
Subject: Re: [Chevelle-List] Ferrari F1


OK guys, this is not a Chevelle its the sound of the new ferrari F1 2003

try this link

http://www.humor911.com/innslagID.asp?innslagID=981
Kind Regards

André
- Original Message -
From: John Nasta [EMAIL PROTECTED]
To: [EMAIL PROTECTED]
Sent: Wednesday, February 19, 2003 6:24 PM
Subject: RE: [Chevelle-List] Wiring stuff


 I got new engine and forward lamp harnesses from MH and got them wired
for
 internal reg and HEI. Hopefully I'll get to put them on the car some day.
 Ron says it's too cold in his shop to spray paint, and that's the holdup
 right now.

 John can we get this winter b.s. over with already? Nasta



 -Original Message-
 From: [EMAIL PROTECTED]
 [mailto:[EMAIL PROTECTED]]On Behalf Of Wayne
 Sent: Wednesday, February 19, 2003 12:05 PM
 To: [EMAIL PROTECTED]
 Subject: Re: [Chevelle-List] Wiring stuff

  Hi Kurt.
  I have never used the conversion internal reg harness . BUT ASSUME  it's
a
 viable solution .

  As for the HEI conversion. The difference in your Eng. harness and
firwall
 bulkhead is.
 bulk head the wired is a 20ga. and the eng. harness is a 20 ga wire with a
 length or resitance wire to drop the Voltage at the
 distributor to 7 to 8 volts.  The HEI likes a FULL 13.8 volt from the main
 block. Most guys seem to run a 12ga or 14ga  wire from the HEI  to the
main
 juntion block and then to a switched 12v source .. You can get creative
and
 call MH and get the flea clips and wire it right in to the old OR/PPL 20
ga
 circuit  in your eng harness.  A added pluss is now only need one wire to
 the starter ..

 Wayne

 opic, send mail to: [EMAIL PROTECTED]


 -
 To Unsubscribe please visit www.chevelles.net/list.html
 To start a new topic, send mail to: [EMAIL PROTECTED]


-
To Unsubscribe please visit www.chevelles.net/list.html
To start a new topic, send mail to: [EMAIL PROTECTED]


-
To Unsubscribe please visit www.chevelles.net/list.html
To start a new topic, send mail to: [EMAIL PROTECTED]



RE: [Chevelle-List] Ferrari F1

2003-02-19 Thread John Nasta
I finally listened to it. That's great.

John Nasta



-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED]]On Behalf Of Richard M. Pruett
Sent: Wednesday, February 19, 2003 2:35 PM
To: [EMAIL PROTECTED]
Subject: RE: [Chevelle-List] Ferrari F1

Sounds like the Ferrari I had when I was about 5.

-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED]]On Behalf Of Tigergutt
Sent: Wednesday, February 19, 2003 12:57 PM
To: [EMAIL PROTECTED]
Subject: Re: [Chevelle-List] Ferrari F1


OK guys, this is not a Chevelle its the sound of the new ferrari F1 2003

try this link

http://www.humor911.com/innslagID.asp?innslagID=981
Kind Regards

André
- Original Message -
From: John Nasta [EMAIL PROTECTED]
To: [EMAIL PROTECTED]
Sent: Wednesday, February 19, 2003 6:24 PM
Subject: RE: [Chevelle-List] Wiring stuff


 I got new engine and forward lamp harnesses from MH and got them wired
for
 internal reg and HEI. Hopefully I'll get to put them on the car some day.
 Ron says it's too cold in his shop to spray paint, and that's the holdup
 right now.

 John can we get this winter b.s. over with already? Nasta



 -Original Message-
 From: [EMAIL PROTECTED]
 [mailto:[EMAIL PROTECTED]]On Behalf Of Wayne
 Sent: Wednesday, February 19, 2003 12:05 PM
 To: [EMAIL PROTECTED]
 Subject: Re: [Chevelle-List] Wiring stuff

  Hi Kurt.
  I have never used the conversion internal reg harness . BUT ASSUME  it's
a
 viable solution .

  As for the HEI conversion. The difference in your Eng. harness and
firwall
 bulkhead is.
 bulk head the wired is a 20ga. and the eng. harness is a 20 ga wire with a
 length or resitance wire to drop the Voltage at the
 distributor to 7 to 8 volts.  The HEI likes a FULL 13.8 volt from the main
 block. Most guys seem to run a 12ga or 14ga  wire from the HEI  to the
main
 juntion block and then to a switched 12v source .. You can get creative
and
 call MH and get the flea clips and wire it right in to the old OR/PPL 20
ga
 circuit  in your eng harness.  A added pluss is now only need one wire to
 the starter ..

 Wayne

 opic, send mail to: [EMAIL PROTECTED]


 -
 To Unsubscribe please visit www.chevelles.net/list.html
 To start a new topic, send mail to: [EMAIL PROTECTED]


-
To Unsubscribe please visit www.chevelles.net/list.html
To start a new topic, send mail to: [EMAIL PROTECTED]


-
To Unsubscribe please visit www.chevelles.net/list.html
To start a new topic, send mail to: [EMAIL PROTECTED]


-
To Unsubscribe please visit www.chevelles.net/list.html
To start a new topic, send mail to: [EMAIL PROTECTED]