Re: [Chevelle-list] Drive shaft yoke!
Thanks. I'll call! -Original Message- From: Jim H. Thompson [mailto:[EMAIL PROTECTED] Sent: Thursday, April 27, 2006 8:00 PM To: The Chevelle Mailing List Subject: Re: [Chevelle-list] Drive shaft yoke! Drive shaft loop check Jeg's or Summit -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] Behalf Of Dan Mascheck Sent: Thursday, April 27, 2006 8:47 PM To: 'John'; 'The Chevelle Mailing List' Subject: Re: [Chevelle-list] Drive shaft yoke! Maybe I used the wrong term for what I'm looking for! I want something to contain the drive shaft in case a U-joint snaps especially on the front of the drive shaft! I don't want the shaft spinning inside my car! I'm running over 700HP, so the threat of breaking a joint is highly possible! I may have used the wrong term! I thought they called it a yoke that encircles the drive shaft! Dan Mascheck -Original Message- From: John [mailto:[EMAIL PROTECTED] Sent: Wednesday, April 26, 2006 6:27 PM To: The Chevelle Mailing List Subject: Re: [Chevelle-list] Drive shaft yoke! Larry the big difference in yokes is the number of splines. Muncie 4spd 70 and up take 32 spline yoke instead of standard 27 spline output. Same yoke as some Turbo 400's. All 26 spline input Muncies take 32 spline output and all 10 spline input trans take 27 output. Length may vary according to driveshaft etc. Some 400 Turbo's had bolt on yoke for driveshaft. It bolted to end of mainshaft. Hope some of this helps. By the way what is the length of the drive shaft you have from center of u-joint to center of u-joint? If right length I need to talk to you about taking it off your hands. Thanks John - Original Message - From: Larry Shouse [EMAIL PROTECTED] To: The Chevelle Mailing List Chevelle-list@chevelles.net Sent: Tuesday, April 25, 2006 6:37 PM Subject: Re: [Chevelle-list] Drive shaft yoke! I have a driveshaft laying around with a yoke still on it. Not sure what year it came off of, or what tranny was used with it, but it came with my 66 basket case. It's too short for my car with a big block and 4 speed. Anybody have an idea are all yokes interchangeable with Chevelles? Dan, what's your engine/tranny combo? If we can determine that my yoke will work, you can have it for shipping cost. Larry Shouse - Original Message - From: Dan Mascheck [EMAIL PROTECTED] To: Chevelle-list@chevelles.net Sent: Tuesday, April 25, 2006 7:16 PM Subject: [Chevelle-list] Drive shaft yoke! I'm trying to find a drive shaft yoke for my 72 Chevelle. Any ideas? Dan Mascheck
Re: [Chevelle-list] Drive shaft yoke!
Yes, I know your right, my fault, but who has one. Someone said Summit or Jegs, but I looked through the Summit catalog and didn't notice any. I guess I'll call today! -Original Message- From: Clint Hooper [mailto:[EMAIL PROTECTED] Sent: Thursday, April 27, 2006 7:58 PM To: The Chevelle Mailing List Subject: Re: [Chevelle-list] Drive shaft yoke! You're looking for a safety loop,not a yoke. Clint Hooper HH Custom,owner 1969 El Camino protourer 2001 H-D FLHR custom bagger http://dalesplace.com/misc/friends/clint/clint_hooper.htm You may find me dead one day in a ditch. But by God,you'll find me in a pile of brass. - Original Message - From: Dan Mascheck [EMAIL PROTECTED] Maybe I used the wrong term for what I'm looking for! I want something to contain the drive shaft in case a U-joint snaps especially on the front of the drive shaft! I don't want the shaft spinning inside my car! I'm running over 700HP, so the threat of breaking a joint is highly possible! I may have used the wrong term! I thought they called it a yoke that encircles the drive shaft! Dan Mascheck
Re: [Chevelle-list] Drive shaft yoke!
Do a search for safety loop at http://www.summitracing.com and you'll turn up quite a few of them. Anywhere from $20 to $50 for universal types. Dale McIntosh 67 El Camino 1967 Chevelle Reference CD http://www.chevellecd.com ACES #1709/TC Gold #92 -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Dan Mascheck Sent: Friday, April 28, 2006 6:35 AM To: 'The Chevelle Mailing List' Subject: Re: [Chevelle-list] Drive shaft yoke! Yes, I know your right, my fault, but who has one. Someone said Summit or Jegs, but I looked through the Summit catalog and didn't notice any. I guess I'll call today! -Original Message- From: Clint Hooper [mailto:[EMAIL PROTECTED] Sent: Thursday, April 27, 2006 7:58 PM To: The Chevelle Mailing List Subject: Re: [Chevelle-list] Drive shaft yoke! You're looking for a safety loop,not a yoke. Clint Hooper HH Custom,owner 1969 El Camino protourer 2001 H-D FLHR custom bagger http://dalesplace.com/misc/friends/clint/clint_hooper.htm You may find me dead one day in a ditch. But by God,you'll find me in a pile of brass. - Original Message - From: Dan Mascheck [EMAIL PROTECTED] Maybe I used the wrong term for what I'm looking for! I want something to contain the drive shaft in case a U-joint snaps especially on the front of the drive shaft! I don't want the shaft spinning inside my car! I'm running over 700HP, so the threat of breaking a joint is highly possible! I may have used the wrong term! I thought they called it a yoke that encircles the drive shaft! Dan Mascheck
Re: [Chevelle-list] Drive shaft yoke!
Thanks for the help! Dan Mascheck -Original Message- From: Dale [mailto:[EMAIL PROTECTED] Sent: Friday, April 28, 2006 10:31 AM To: 'The Chevelle Mailing List' Subject: Re: [Chevelle-list] Drive shaft yoke! Do a search for safety loop at http://www.summitracing.com and you'll turn up quite a few of them. Anywhere from $20 to $50 for universal types. Dale McIntosh 67 El Camino 1967 Chevelle Reference CD http://www.chevellecd.com ACES #1709/TC Gold #92 -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Dan Mascheck Sent: Friday, April 28, 2006 6:35 AM To: 'The Chevelle Mailing List' Subject: Re: [Chevelle-list] Drive shaft yoke! Yes, I know your right, my fault, but who has one. Someone said Summit or Jegs, but I looked through the Summit catalog and didn't notice any. I guess I'll call today! -Original Message- From: Clint Hooper [mailto:[EMAIL PROTECTED] Sent: Thursday, April 27, 2006 7:58 PM To: The Chevelle Mailing List Subject: Re: [Chevelle-list] Drive shaft yoke! You're looking for a safety loop,not a yoke. Clint Hooper HH Custom,owner 1969 El Camino protourer 2001 H-D FLHR custom bagger http://dalesplace.com/misc/friends/clint/clint_hooper.htm You may find me dead one day in a ditch. But by God,you'll find me in a pile of brass. - Original Message - From: Dan Mascheck [EMAIL PROTECTED] Maybe I used the wrong term for what I'm looking for! I want something to contain the drive shaft in case a U-joint snaps especially on the front of the drive shaft! I don't want the shaft spinning inside my car! I'm running over 700HP, so the threat of breaking a joint is highly possible! I may have used the wrong term! I thought they called it a yoke that encircles the drive shaft! Dan Mascheck
Re: [Chevelle-list] Drive shaft yoke!
I have a 400 specially prepped! Dan Mascheck From: Eddie Bumgarner [mailto:[EMAIL PROTECTED] Sent: Wednesday, April 26, 2006 3:06 PM To: The Chevelle Mailing List Subject: Re: [Chevelle-list] Drive shaft yoke! What kind of tranmission are you running? 400 are different than 350. good luck. Eddie 66ss conv. Dan Mascheck [EMAIL PROTECTED] wrote: I'm trying to find a drive shaft yoke for my 72 Chevelle. Any ideas? Dan Mascheck Eddie Bumgarner 66ss conv. Love cheap thrills? Enjoy PC-to-Phone calls to 30+ countries for just 2¢/min with Yahoo! Messenger with Voice.
Re: [Chevelle-list] Drive shaft yoke!
Maybe I used the wrong term for what I'm looking for! I want something to contain the drive shaft in case a U-joint snaps especially on the front of the drive shaft! I don't want the shaft spinning inside my car! I'm running over 700HP, so the threat of breaking a joint is highly possible! I may have used the wrong term! I thought they called it a yoke that encircles the drive shaft! Dan Mascheck -Original Message- From: John [mailto:[EMAIL PROTECTED] Sent: Wednesday, April 26, 2006 6:27 PM To: The Chevelle Mailing List Subject: Re: [Chevelle-list] Drive shaft yoke! Larry the big difference in yokes is the number of splines. Muncie 4spd 70 and up take 32 spline yoke instead of standard 27 spline output. Same yoke as some Turbo 400's. All 26 spline input Muncies take 32 spline output and all 10 spline input trans take 27 output. Length may vary according to driveshaft etc. Some 400 Turbo's had bolt on yoke for driveshaft. It bolted to end of mainshaft. Hope some of this helps. By the way what is the length of the drive shaft you have from center of u-joint to center of u-joint? If right length I need to talk to you about taking it off your hands. Thanks John - Original Message - From: Larry Shouse [EMAIL PROTECTED] To: The Chevelle Mailing List Chevelle-list@chevelles.net Sent: Tuesday, April 25, 2006 6:37 PM Subject: Re: [Chevelle-list] Drive shaft yoke! I have a driveshaft laying around with a yoke still on it. Not sure what year it came off of, or what tranny was used with it, but it came with my 66 basket case. It's too short for my car with a big block and 4 speed. Anybody have an idea are all yokes interchangeable with Chevelles? Dan, what's your engine/tranny combo? If we can determine that my yoke will work, you can have it for shipping cost. Larry Shouse - Original Message - From: Dan Mascheck [EMAIL PROTECTED] To: Chevelle-list@chevelles.net Sent: Tuesday, April 25, 2006 7:16 PM Subject: [Chevelle-list] Drive shaft yoke! I'm trying to find a drive shaft yoke for my 72 Chevelle. Any ideas? Dan Mascheck
Re: [Chevelle-list] Drive shaft yoke!
You're looking for a safety loop,not a yoke. Clint Hooper HH Custom,owner 1969 El Camino protourer 2001 H-D FLHR custom bagger http://dalesplace.com/misc/friends/clint/clint_hooper.htm You may find me dead one day in a ditch. But by God,you'll find me in a pile of brass. - Original Message - From: Dan Mascheck [EMAIL PROTECTED] Maybe I used the wrong term for what I'm looking for! I want something to contain the drive shaft in case a U-joint snaps especially on the front of the drive shaft! I don't want the shaft spinning inside my car! I'm running over 700HP, so the threat of breaking a joint is highly possible! I may have used the wrong term! I thought they called it a yoke that encircles the drive shaft! Dan Mascheck
Re: [Chevelle-list] Drive shaft yoke!
Do you have a phone number or email address? Will it fit a 72? Dan Mascheck Wharton, TX -Original Message- From: D.R. Jones [mailto:[EMAIL PROTECTED] Sent: Tuesday, April 25, 2006 7:09 PM To: The Chevelle Mailing List Subject: Re: [Chevelle-list] Drive shaft yoke! I get mine from the driveshaft shop I use in north Fort Worth. D.R. Jones Dan Mascheck wrote: I'm trying to find a drive shaft yoke for my 72 Chevelle. Any ideas? Dan Mascheck
Re: [Chevelle-list] Drive shaft yoke!
What kind of tranmission are you running? 400 are different than 350. good luck. Eddie 66ss conv.Dan Mascheck [EMAIL PROTECTED] wrote: I'm trying to find a drive shaft yoke for my 72 Chevelle. Any ideas?Dan MascheckEddie Bumgarner 66ss conv. Love cheap thrills? Enjoy PC-to-Phone calls to 30+ countries for just 2¢/min with Yahoo! Messenger with Voice.
Re: [Chevelle-list] Drive shaft yoke!
Larry the big difference in yokes is the number of splines. Muncie 4spd 70 and up take 32 spline yoke instead of standard 27 spline output. Same yoke as some Turbo 400's. All 26 spline input Muncies take 32 spline output and all 10 spline input trans take 27 output. Length may vary according to driveshaft etc. Some 400 Turbo's had bolt on yoke for driveshaft. It bolted to end of mainshaft. Hope some of this helps. By the way what is the length of the drive shaft you have from center of u-joint to center of u-joint? If right length I need to talk to you about taking it off your hands. Thanks John - Original Message - From: Larry Shouse [EMAIL PROTECTED] To: The Chevelle Mailing List Chevelle-list@chevelles.net Sent: Tuesday, April 25, 2006 6:37 PM Subject: Re: [Chevelle-list] Drive shaft yoke! I have a driveshaft laying around with a yoke still on it. Not sure what year it came off of, or what tranny was used with it, but it came with my 66 basket case. It's too short for my car with a big block and 4 speed. Anybody have an idea are all yokes interchangeable with Chevelles? Dan, what's your engine/tranny combo? If we can determine that my yoke will work, you can have it for shipping cost. Larry Shouse - Original Message - From: Dan Mascheck [EMAIL PROTECTED] To: Chevelle-list@chevelles.net Sent: Tuesday, April 25, 2006 7:16 PM Subject: [Chevelle-list] Drive shaft yoke! I'm trying to find a drive shaft yoke for my 72 Chevelle. Any ideas? Dan Mascheck
Re: [Chevelle-list] Drive shaft yoke!
Thanks for the info John. I'll save it in my save folder. As to the driveshaft length, I will measure in the morning and let you know. Larry Shouse - Original Message - From: John [EMAIL PROTECTED] To: The Chevelle Mailing List Chevelle-list@chevelles.net Sent: Wednesday, April 26, 2006 7:26 PM Subject: Re: [Chevelle-list] Drive shaft yoke! Larry the big difference in yokes is the number of splines. Muncie 4spd 70 and up take 32 spline yoke instead of standard 27 spline output. Same yoke as some Turbo 400's. All 26 spline input Muncies take 32 spline output and all 10 spline input trans take 27 output. Length may vary according to driveshaft etc. Some 400 Turbo's had bolt on yoke for driveshaft. It bolted to end of mainshaft. Hope some of this helps. By the way what is the length of the drive shaft you have from center of u-joint to center of u-joint? If right length I need to talk to you about taking it off your hands. Thanks John - Original Message - From: Larry Shouse [EMAIL PROTECTED] To: The Chevelle Mailing List Chevelle-list@chevelles.net Sent: Tuesday, April 25, 2006 6:37 PM Subject: Re: [Chevelle-list] Drive shaft yoke! I have a driveshaft laying around with a yoke still on it. Not sure what year it came off of, or what tranny was used with it, but it came with my 66 basket case. It's too short for my car with a big block and 4 speed. Anybody have an idea are all yokes interchangeable with Chevelles? Dan, what's your engine/tranny combo? If we can determine that my yoke will work, you can have it for shipping cost. Larry Shouse - Original Message - From: Dan Mascheck [EMAIL PROTECTED] To: Chevelle-list@chevelles.net Sent: Tuesday, April 25, 2006 7:16 PM Subject: [Chevelle-list] Drive shaft yoke! I'm trying to find a drive shaft yoke for my 72 Chevelle. Any ideas? Dan Mascheck
[Chevelle-list] Drive shaft yoke!
I'm trying to find a drive shaft yoke for my 72 Chevelle. Any ideas? Dan Mascheck
Re: [Chevelle-list] Drive shaft yoke!
I have a driveshaft laying around with a yoke still on it. Not sure what year it came off of, or what tranny was used with it, but it came with my 66 basket case. It's too short for my car with a big block and 4 speed. Anybody have an idea are all yokes interchangeable with Chevelles? Dan, what's your engine/tranny combo? If we can determine that my yoke will work, you can have it for shipping cost. Larry Shouse - Original Message - From: Dan Mascheck [EMAIL PROTECTED] To: Chevelle-list@chevelles.net Sent: Tuesday, April 25, 2006 7:16 PM Subject: [Chevelle-list] Drive shaft yoke! I'm trying to find a drive shaft yoke for my 72 Chevelle. Any ideas? Dan Mascheck
Re: [Chevelle-list] Drive shaft yoke!
I get mine from the driveshaft shop I use in north Fort Worth. D.R. Jones Dan Mascheck wrote: I'm trying to find a drive shaft yoke for my 72 Chevelle. Any ideas? Dan Mascheck
