Re: [Chevelle-List] Tremec 5 speed in66?

2002-01-21 Thread KNUTSONChevelle
OK, I got it book marked  will definitely keep you in mind. I believe this would make my 66 much more pleasurable to drive.
Please keep me in mind if anyone does this setup in a 66 before I. 
Thanks,
 Dan


Re: [Chevelle-List] Tremec 5 speed in66?

2002-01-20 Thread Michael Pell


No problem, glad to help out any I can. I'd appreciate it if you
remember me when/if you buy a Tremec. I'll quite likely beat everyone
else's price for you.
You might bookmark http://www.tremectransmissions.com/ I just
started it, and will continue working on it.
The guy with the '64 hasn't returned my emails, but I'll keep asking
around. I hope to build a list of cars that people have done, and
document their experiences. Maybe by summer, I'll have more on the
early-mid Chevelles.
Mike Forte agreed that you're more likely to have to modify the tunnel
on the '66/'67 than in the '68-72 cars, because the tunnel is a little
smaller. He suggested that it would have to be raised a little.
He didn't say how much exactly, but he indicated a small about. I'd
guess 1/4" to 3/8". You'd only have to do a small section, where
the top-center of the trans meets the tunnel walls.
take care!

[EMAIL PROTECTED] wrote:
Thanks
I appreciate but wont be doing any thing until summer when school lets
out at the earliest. I will keep your e-mail on file though so I have your
address when I do get ready. Please let me know if someone actully puts
one in a 66. I also will be looking forward to the info on the 65. Thanks,
Dan

--
 Check out my webpage at http://www.ProStreetCar.com
 and my For Sale page at http://www.ProStreetCar.com/classifieds.html
 Tremec Distributor at http://www.tremectransmissions.com/
 Team Chevelle membership #178 (Gold)



Re: [Chevelle-List] Tremec 5 speed in66?

2002-01-18 Thread KNUTSONChevelle
Thanks I appreciate but wont be doing any thing until summer when school lets out at the earliest. I will keep your e-mail on file though so I have your address when I do get ready. Please let me know if someone actully puts one in a 66. I also will be looking forward to the info on the 65. Thanks,
 Dan


Re: [Chevelle-List] Tremec 5 speed in66?

2002-01-16 Thread KNUTSONChevelle
Has anyone tried putting one in a 66 chevelle yet. I've heard the tunnels on 66's are even smaller than 68-72 chevelles but not sure. Would like to hear from anyone that's put a termec into a 66. 
Thanks,
Dan


Re: [Chevelle-List] Tremec 5 speed in66?

2002-01-16 Thread Bad66Chevelle454
Can I get some information on the Tremec tranny? Do they have a website?? I have a 66 also, with a big block, and it would be nice to go over 60 on the freeway w/o taching out. Thanks

Tim


Re: [Chevelle-List] Tremec 5 speed in66?

2002-01-16 Thread Michael Pell


Tim, check out this article http://www.chevelles.com/techref/fpelltec1.html
Or you can see the links at my web site http://www.ProStreetCar.com
The article details my experiences with installing a Tremec 5sp into
my '69 Chevelle, and there's quite a bit of info about the transmission
itself. The installation process would be similar for your '66, although
you will more likely have to modify the trans tunnel because the '66 tunnel
is smaller than the '69s.
The Tremec is more of a square trans, where the Muncie/Richmond/Saginaw
trans are round at the top.
Other than that, the GM Tremec will bolt right in, use your existing
bellhousing, clutch, and a TH400 trans mount. The output shaft is
a Ford C6. The C6 yoke is provided with the Tremec, but you'd have
to have your driveshaft modified with the new yoke, and likely shortened
a bit. Again, there's more details in the article.
I'm a distributor for Forte Parts. They have quite a lot of info
about the Tremec at their website at http://www.fortesparts.com/
I can get you a better price than what is listed on their website.
Please let me know of any questions you may have. I'll be glad
to help.
BTW: With 4.33 gears, 31.5" tires, my engine is turning 1900rpm
at 60mph. I just talked to another guy who claims 70mph at 1600rpm!
(3.08 gear, 27.5" tire).
take care,
[EMAIL PROTECTED] wrote:
Can
I get some information on the Tremec tranny? Do they have a website?? I
have a 66 also, with a big block, and it would be nice to go over 60 on
the freeway w/o taching out. Thanks
Tim

--
 Check out my webpage at http://www.ProStreetCar.com
 and my For Sale page at http://www.ProStreetCar.com/classifieds.html
 Tremec Distributor, Team Chevelle membership #178 (Gold)