Re: CCIE LAB on NYC area
try www.tcytech.com, a small place but the training is better than average. cheers, ak Mike Peterson wrote: Hi all, Does any one knows if there is a very good CCIE LAB in NYC area... something like the LAB in San Jose? Thank you, Mike _ Get your FREE download of MSN Explorer at http://explorer.msn.com _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: IBGP multihop?
use neighbor w.x.y.z update-source loopback 0 On Wed, 14 Mar 2001, Richard Chang wrote: For EBGP, you can use the ebgp-multihop command when the neighbors are not directly-connected. I was just wondering whether there is a similar work-around that anyone know of for IBGP. Basically, I am using loopback interfaces on these two routers and they have to go through another hop before hitting each other. I configured IBGP on these two routers with those loopback addresses and found out that the BGP session can't be formed... Thanks Richard _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: Terminal Server for beginners
Under line 1 8, issuing a 'no exec' command should also do the trick. ak Brian Lodwick wrote: Group I have been fighting with the performance of my terminal server for a few weeks now. It works, and I have been using it, but like I said I have been fighting with it. It seems to send characters to other ports when I haven't initiated a connection to that port. The way I can tell this is when I get onto that port it is responding to characters entered even though I haven't entered anything. This is quite peculiar. I have looked at many books to see if I am doing something wrong and the only indication was in Bruce Caslow's book saying if your terminal server incorrectly shows active connections on lines that don't have any connections established the command "modem host" on the line config will fix this. Well this didn't fix mine for s*#@. I finally figured out the way to fix mine was to add "modem inout" boom it works like a charm. I am running 12.0.8 on this 2511. Maybe this is something everyone already knew, but I didn't and maybe it will save someone else some pain. config t ip host r1 10.0.0.1 2001 int loopback 0 ip address 10.0.0.1 255.255.255.0 exit line 1 8 transport input all modem inout exec-timeout 0 0 other routers assure the exec-timeout is set to 0 0 on the console. _ Get your FREE download of MSN Explorer at http://explorer.msn.com _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] -- Cheers, Akbar Kara212.305.6869 Network Design [EMAIL PROTECTED] Core Resources - Columbia Presbyterian [EMAIL PROTECTED] == _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Good News and Thanks
First the news, last evening, I passed :) the CCIE written qualification exam (80/100). I am keen on getting started with preparation for the lab exam. Fortunately, my employer has invested in lab equipment and one of my co-worker/lab-buddy is also a CCIE hopeful. Any advice would be appreciated. Are there web links for practice lab scenarios? Many thanks to all the folks on this list as I have been getting a wealth of knowledge and insight on wide range of topics which are discussed here. I will continue to follow and hopefully be in a position to contribute. Priscilla, Howard, John Neiberger and other top talkers... I admire you guys for your knowledge and willingness to share it. Keep it up. Cheers, Akbar Kara _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: Inquires...
On dark fiber in nyc, try http://www.mmfn.com/ ak Mike Peterson wrote: Hi All, I am wandering what is the command line to put in main router to make the remote routers to syncronize the time with the main router.We are in east coast (Eastern time). Does anyone knows who is the Company that can install a DARKFIBER in New York area? Thanks, Mike _ Get your FREE download of MSN Explorer at http://explorer.msn.com _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: Network Management Program (which???)
Check out the product at intermapper.com This inexpensive product only runs on macOS but does a lot more than $100K+ solutions available in the market. Good Luck ak [EMAIL PROTECTED] wrote: Hey Group, Need some help on this one. I just came on as a contractor for this company. The network is somewhat small. They have around 186 routers worldwide and around 22 switches that they have to worry about. So all in all, there are around 200 managed devices for us to take care of. Currently they are using some program called "What's Up Gold". Personally, I hate this thing. It's not secure, the features are minimal, and I hate web based stuff. They have it set up on one machine and everyone access's it from the web to it's IP. The manager has expresed some interest in other methods but it will be hard to move him away from what there is now after he gets back in a week from a business trip. I would like to present a proposal on a new management system. My problem is that I have only worked in Openview before. I think Openview is awesome and gives you all the features you need and more. For this site though, I think it would be too much. I just don't think it's really needed for the size of this network and the management/configuration of it would overseed the network management itself. Basically, I'm asking what you guru's out there think I should present to use. Should it be CiscoWorks2000, Openview, or stay with What's Up Gold? I really appreciate the help and thanks for putting up with the long post. Thanks all, Mark Z... _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
