use neighbor w.x.y.z update-source loopback 0
On Wed, 14 Mar 2001, Richard Chang wrote:
> For EBGP, you can use the ebgp-multihop command when the neighbors are not
> directly-connected. I was just wondering whether there is a similar
> work-around that anyone know of for IBGP.
>
> Basically, I am using loopback interfaces on these two routers and they have
> to go through another hop before hitting each other. I configured IBGP on
> these two routers with those loopback addresses and found out that the BGP
> session can't be formed...
>
> Thanks
>
> Richard
>
>
> _________________________________
> FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
> Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
>
_________________________________
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
