Configuring router as TFTP server [7:43951]
Dear Group Members, I am trying to configure a router with TFTP server, router R_0 is will be the server. Router R_1 will copy its runing config on to R_0. R_0 and R_1 are connected over a x-over Cat V cable, and I have tested the connectivity using ping - it is OK! R_0 is configured as TFTP server, by issuing the following command: tftp-server flash:r0.config when issued the above command I receive an warning, here it is Warning: flash:r0.config does not exist. Command retained. Next, from R_1 I issue the following commands: R_1# copy star tftp Remote host[]? 172.154.2.2 Name of configuration file to write [r_0-config]? r0.config Write file r0.config on host 172.154.2.2? [confirm] Writing r0.config TFTP: error code 2 received - Access denied [Failed] Well there is no ACL on any of the routers. I have looked+searched on Cisco website, nothing so far Group please help me. Regards Arjun Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=43951t=43951 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: IPX Traceroute [7:43327]
Hello Priscilla, I upgreaded the IOS of Router RTR_AL, and it worked. However I didn't upgrade the IOS of Router RTR_1. Listed below is the outcome of the 'traceroute ipx' from Router RTR_3. R3# trace ipx 100.000.0c3d.d1eb Tracing the route to 100.000.0c3d.d1eb 0 * * * 1 * * * 2 100.000.0c3d.d1eb 24 Msec 16 Msec 16 Msec R3# A million thanks Regards Arjun Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=43387t=43327 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
RE: IPX Traceroute [7:43327]
Hello Philip, Apologies for such 'skewed' ASCII ART, it was not intended that way. A better image (well sort of) is provided at 'http://www.geocities.com/nerubaba/'. Well the problem is now solved, as suggested by Priscilla Oppenheimer - upgrade the IOS to a newer version. Once again a million thanks for the trouble taken to answer the post. Kind regards Arjun Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=43388t=43327 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
IPX Traceroute [7:43327]
Dear Group Members, This is my first message please accept apologies for any mistakes. However, I seek help for the following problem. Here is the setup! IPX Network: 100 ---|--|--- | | RTR-1 RTR-AL / / |(1c10) / /| (1120)/ / SWITCH1 / / | / /(1210)| (1100) RTR-2 RTR-3 Problem: IPX routing is enabled on all the routers. I can ping (IPX) RTR-AL from RTR-3 but can not perform TRACEROUTE? Any help will be much appreciated? Output from ROUTER-3 (RTR-3) --- RTR-3# RTR-3#ping 100..0c3d.d1eb Translating 100..0c3d.d1eb Type escape sequence to abort. Sending 5, 100-byte IPX Novell Echoes to 100..0c3d.d1eb, timeout is 2 seconds: ! Success rate is 100 percent (5/5), round-trip min/avg/max = 32/35/44 ms RTR-3# RTR-3# RTR-3#traceroute ipx 100..0c3d.d1eb Type escape sequence to abort. Tracing the route to 100..0c3d.d1eb 0 * * * 1 * * * 2 * * * 3 * * * ... tracing the route using Diagnostic Requests 4 * * * RTR-3# __ Do You Yahoo!? Yahoo! Health - your guide to health and wellness http://health.yahoo.com Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=43327t=43327 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
IPX Traceroute [7:43328]
Dear Members, I just realised that the scenario diagram for the problem IPX Traceroute is not clear, so I made a quick html page where it can be seen properly here is the URL http://www.geocities.com/nerubaba/index.html __ Do You Yahoo!? Yahoo! Health - your guide to health and wellness http://health.yahoo.com Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=43328t=43328 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]