VLANs and SNMP [7:47091]
Hi, I have one query regarding VLAN representation in SNMP. I had to find if VLANs are configured in a cisco box.And I can only do it thru SNMP means. I looked at the Bridge MIB extensions and it says that ifType value for a VLAN interface should be propVirtual(53) Now I looked at the interface table of Catalyst 6000 series (MSFC Software (C6MSFC-JSV-M), Version 12.1(8a)). It has bunch of VLAN interfaces with ifType as ethernetcsmaCd. Well this seems to be true for any MSFC card. So where is the catch... I mean what i should understand by this and what else I can look at to find if VLANs are present. Thanks, Ashish Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=47091t=47091 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
VLANs and SNMP [7:47104]
Hi, I have one query regarding VLAN representation in SNMP. I had to find if VLANs are configured in a cisco box.And I can only do it thru SNMP means. I looked at the Bridge MIB extensions and it says that ifType value for a VLAN interface should be propVirtual(53) Now I looked at the interface table of Catalyst 6000 series (MSFC Software (C6MSFC-JSV-M), Version 12.1(8a)). It has bunch of VLAN interfaces with ifType as ethernetcsmaCd. Well this seems to be true for any MSFC card. So where is the catch... I mean what i should understand by this and what else I can look at to find if VLANs are present. Thanks, Ashish Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=47104t=47104 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: Serial no MAC [7:46429]
yeah, there's no need for MAC address as such for PPP interfaces. but what about PPP over ethernet. - Original Message - From: timothy thielen To: Sent: Thursday, June 13, 2002 6:20 AM Subject: Re: Serial no MAC [7:46429] I would like to revise and extend your answer. :-) A serial interface is not *always* point-to-point. The answer actually depends on the Layer 2 protocol you are using. If you are using Frame-relay, you have a DLCI mapped to the IP address. On ATM you have a VPI/VCI combo. On point-to-point (PPP, etc...) the router, as Steven said, doesn't need a hardware address, since it is just sending and recieving on the interface where there is only one possible recipient, so the router only needs to know that the destination is out a specific p-t-p serial interface. -Tim Steven A. Ridder wrote: point-to-point, so no mac is needed. There is only one recepient. -- RFC 1149 Compliant. Stanzin Takpa wrote in message [EMAIL PROTECTED]">news:[EMAIL PROTECTED]... When there is no MAC address on serial interface, how the packets are routing ? Stanzin [GroupStudy.com removed an attachment of type application/ms-tnef which had a name of winmail.dat] Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=46473t=46429 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: CCNP 640-603 [7:46328]
well, CCNP does not have lab exam in it.So no matter what questions u put in the exam, u cannot avoid those people who take exam without any lab experience.U can always read ,understand concepts, memorize commands and read some scenarios. There's no need to actually work on cisco boxes. CCNP should have lab exam as part of the certification if we totally want to remove the concept of Paper CCNP's even if not as exhaustive as in CCIE. - Original Message - From: To: Sent: Wednesday, June 12, 2002 5:19 AM Subject: RE: CCNP 640-603 [7:46328] Hi Amir, Just remember that the exam format has changed but the material on which you are going to be tested has not. If you have experience with routing / etc you should have no problem writing the exam, it could actually be easier. I am sure most would agree with me when I say this, but I think the new Cisco exams are definitely a step in the right direction. After all, they are now a bit more real world based. It would help get eliminate some of the Paper CCNP's that we see. This is a proactive decision on Cisco's part I think to negate the MCSE syndrome as I like to call it. BTW I consider myself a bit of a Paper CCNP. I personally am looking forward to writing CIT next week in the new format to complete my CCNP. My view, of course, could change on my result on that exam. Good luck Manish Hira ___ Manish Hira () Network Administrator Servier Laboratories SA (Pty) Ltd -Original Message- From: Amir Tahir [mailto:[EMAIL PROTECTED]] Sent: 12 June 2002 09:00 To: [EMAIL PROTECTED] Subject: CCNP 640-603 [7:46328] HI!! I need an advise for CCNP exam 640-603 as it just changed. I m going to write routing exam by next week. I'll be thankful to all of you for any +ve feedback Regards Amir Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=46372t=46328 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: It's Official - CCNP 6xx series [7:45867]
hey, what is meant by like to change their minds. I am going to give CCNP-Support exam next tuesday(06/11) Does it mean I can expect 6xx series exam.. I registered for 5xx series last week. - Original Message - From: Mark Villanova To: Sent: Wednesday, June 05, 2002 2:39 PM Subject: RE: It's Official - CCNP 6xx series [7:45867] Anyone already registered for an exam can still take the 5xx until the 14th. But they like to change their minds. So expect the 6xx -Original Message- From: Kaminski, Shawn G [mailto:[EMAIL PROTECTED]] Sent: Wednesday, June 05, 2002 4:22 PM To: [EMAIL PROTECTED] Subject: It's Official - CCNP 6xx series [7:45867] Just called Prometric and VUE for information on when they're switching to the new CCNP 6xx series exams. As of this afternoon, 6/5/02, the CCNP 5xx series exams are no longer available. Shawn K. Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=45875t=45867 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
OT : routing design architecture [7:45680]
Hi, I have been searching about different ways routing can be implemented, in terms of design and architecture. zebra code is good enough to look at but it is without any documentation at the code and design level. So if anyone knows where I can find one, please let me know. Thanks, Ashish Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=45680t=45680 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
