RE: Cat 4000 Switch

[Chen, Scott]

Try version 5.4.2 with the following commands.

set ip http server disable
set ip http port 80

Scott

-Original Message-
From: Adrian Chew [mailto:[EMAIL PROTECTED]]
Sent: Wednesday, November 29, 2000 7:38 AM
To: [EMAIL PROTECTED]
Subject: Re: Cat 4000 Switch


You might need a newer version of the software - look for those with
CV/CiscoView.  You also need the Java client on your PC as you do with the
2900/3500XL series switches for HTTP based management.  If you can't find
info in the docs, look at the latest product software version release notes.
That's why all the new feature documentation usually lies.

Regards,
Adrian

""Paul Wiliams"" [EMAIL PROTECTED] wrote in message
902ifq$uei$[EMAIL PROTECTED]">news:902ifq$uei$[EMAIL PROTECTED]...
 I've downloaded the complete Cat 4000 Switch manual, but cannot find the
 command to enable management via http.  I've been advised that its
available
 when set.  ANy ideas?

 btw another newbie so be nice!

 Paul Williams
 Eurobet


 _
 FAQ, list archives, and subscription info:
http://www.groupstudy.com/list/cisco.html
 Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]



_
FAQ, list archives, and subscription info:
http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]

_
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]

switch config

[Chen, Scott]

On a Catalyst 4006 switch, is the config stored on the nvram on the
backplane on the switch?  It's not on the supervisor module right so if I
replace the supervisor module, the config should still be there.  Can
someone confirm and shed some light on this. Thanks.

___
UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
FAQ, list archives, and subscription info: http://www.groupstudy.com
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]

portfast and router

[Chen, Scott]

I have one port on a Catalyst 6500 connected to a router with fast ethernet.
I also have spantree enable on the switches.  Currently I have the spantree
portfast feature disabled on that port on the Catalyst 6500 that connects to
the router.  Should that be enable or disable and why?

___
UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
FAQ, list archives, and subscription info: http://www.groupstudy.com
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]