RE: remote access question - simple but difficult [7:42318]
Henrique, Have you checked the default gateways of the workstations? Dvass Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=42321t=42318 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: Riddle [7:41491]
I agree with you Chuck. It's very unsecure indeed... However, consider it as one of the certifications' riddle... Too theoretic, but must be solved... It has a solution, and it is ROUTER oriented. No IDS or CSPM included... In case you come up with something let me know... Thanx Dvass Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=41564t=41491 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Riddle [7:41491]
Team, I was wondering Is it possible to make a router respond to an access-list blocking, using a custom-made user defined phrase? For example, if we deny telnet from a host we need to reply to him Access-list blocks incoming telnet... ? Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=41491t=41491 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
RE: any good reference or homepage for learning Cisco [7:41282]
Ranma, If you want to learn how to play the guitar, get yourself a guitar... www.cisco.com is the answer Dvass Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=41283t=41282 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
RE: Disable Telnet [7:41293]
Jeremy, If you enter no login under vty 0 4, then you'll get into the router! login means that the router prompts Password:. no login instructs the router to bypass that, giving you access immediately. Dvass Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=41301t=41293 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
RE: Now What???????? [7:40988]
Juan, I bet you've waited a long time to get the CCIE written. Why don't you wait a few months more and announce your number... Be patient CCIE number worths it.. Dvass p.s. we're all Cisco maniacs! ;) Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=41008t=40988 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
RE: CID Exam [7:35685]
As Cisco says, 640-025 is the current CID exam. Good luck pal. Dvass Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=35728t=35685 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
RE: CIT Exam difficulty... [7:34632]
From my point of view, here is what I see: Hardest --- Easiest CIT - Routing - Switching - BCRAN Good luck Dvass Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=34847t=34632 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
RE: Cache Engine [7:33442]
You should configure in the global configuration of the 7204: 7204(config)#ip wccp web-cache You should also redirect http traffic from the intresting interfaces of the 7204 to the cache engine. conf t interface serial x ip wccp web-cache redirect out Cache engine should be configured like this: cache-engine#sh run Building configuration... Current configuration: ! ! ! group add admin gid 0 group add everyone gid 1000 group add LocalUsers gid 1004 ! user add admin uid 0 password 1 xx capability admin-access user add anonymous uid 1002 ! ! ! hostname cache-engine ! interface ethernet 0 ip address xxx.xxx.xxx.xxx 255.255.xxx.xxx ip broadcast-address xxx.xxx.xxx.xxx bandwidth 100 fullduplex exit ! ! interface ethernet 1 exit ! ip default-gateway xxx.xxx.xxx.xxx (internet router) ip name-server xxx.xxx.xxx.xxx ip domain-name xx cron file /local/etc/crontab ! ! http proxy outgoing exclude enable no bypass load enable wccp router-list 1 xxx.xxx.xxx.xxx wccp web-cache router-list-num 1 wccp version 2 ! transaction-logs destination disk ! ! end Dvass Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=33559t=33442 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
RE: Quick RIP questions [7:32311]
Hello, You'll find your answers under : http://www.cisco.com/univercd/cc/td/doc/product/software/ios120/12cgcr/np1_r/1rprt1/1rrip.htm#xtocid1254415 Dvass Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=32416t=32311 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re:1 T WIC not working with 3600series router ???? [7:32258]
WIC 1T supports up to 2048Kit BW (E1)... Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=32418t=32258 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: How to make Serial 0 up/up without connecting [7:32410]
There is no way you can spoof a serial line to up/up state via configuration... Here is what I did: ! interface Serial1 ip address 10.1.1.1 255.255.255.0 loopback no keepalive ! Still... R2#sh int ser 1 Serial1 is down, line protocol is down Hardware is PQUICC Serial Internet address is 10.1.1.1/24 MTU 1500 bytes, BW 1544 Kbit, DLY 2 usec, reliability 255/255, txload 1/255, rxload 1/255 Encapsulation HDLC, crc 16, loopback set Keepalive not set Scramble enabled Last input never, output never, output hang never Last clearing of show interface counters never Input queue: 0/75/0/0 (size/max/drops/flushes); Total output drops: 0 Queueing strategy: weighted fair Output queue: 0/1000/64/0 (size/max total/threshold/drops) Conversations 0/0/256 (active/max active/max total) Reserved Conversations 0/0 (allocated/max allocated) 5 minute input rate 0 bits/sec, 0 packets/sec 5 minute output rate 0 bits/sec, 0 packets/sec 0 packets input, 0 bytes, 0 no buffer Received 0 broadcasts, 0 runts, 0 giants, 0 throttles 0 input errors, 0 CRC, 0 frame, 0 overrun, 0 ignored, 0 abort 0 packets output, 0 bytes, 0 underruns 0 output errors, 0 collisions, 33 interface resets 0 output buffer failures, 0 output buffers swapped out 0 carrier transitions Cable attached: No cable Hardware config: No cable; DTE; DSR = DOWN DTR = DOWN RTS = DOWN CTS = DOWN DCD = DOWN If you haven't attached a cable, serial interface will always be down/down. Only if you build a harware loopback interface and can cross the correct signals you can spoof the interface... Only the Ethernet intarfaces can be spoofed by disabling the keepalives.. Dvass Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=32421t=32410 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: How to make Serial 0 up/up without connecting [7:32410]
Guess I hit the exception!! I tested in on a MC3810 running 12.1(9)! Under the site you gave me it says that the command loopback is modified for that router!!! I'm glad we solved it now. ;-) Best regards Dvass Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=32424t=32410 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re:1 T WIC not working with 3600series router ???? [7:32258]
Hi, WIC 1T works with 3600 series. No question about it... Probably the NM slot on which you put the WIC is faulty. Try putting it on a different slot on the same NM. If it's not working as well, replace the NM. Dvass Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=32279t=32258 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
RE: TACACS+ [7:30963]
Hello Edward, In case you use Cisco equipment, there is the line configuration command absolute-timeout . 3640_DialUp#conf t Enter configuration commands, one per line. End with CNTL/Z. 3640_DialUp(config)#line 97 126 3640_DialUp(config-line)#absolute-timeout ? Absolute timeout interval in minutes I think this will solve your problem... Best regards Dvass Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=31140t=30963 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
RE: Dial into Router [7:26289]
Garbage indicate difference in connection speed Dvass 416South wrote: I'm able to get this modem to dial into the router just fine. Problem is still driving me nuts is that all the characters are showing up as garbage ( ΓΈ ~ using Hyperterm and have tryed with other programs as well. Has anyone been successful with dialing into routers that may have had the same problems? I'm using a USR modem set at 9600 baud flow control hardware Emulation is VT100 Thanks Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=26355t=26289 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
RE: Dialer Profiles - IPCP doesn`t come up ! [7:26232]
I've faced a similar problem in the past If you think that the configs are correct, try to upgrade the IOS on the 801. My problem was solved immediately. Dvass Hans Schimek wrote: I am trying to implement a dial-up connection to a remote site ( Cisco2611 dials to Cisco 801). I am using Dialer Profiles with CHAP Authentication. The config seems to be OK - the router is dialing - authentication is successful - and the line changes to UP. except the IPCP-State - which won`t come UP.. =20 Thx hans =20 - DI(FH) Hans Schimek Systems Engineer=20 NTS Netzwerk Telekom Service Gesellschaft m.b.H Co KG Lemb=F6ckgasse 49/1/B A-1230 Wien Tel: +43 1 867 67 76 - 13 , Fax: +43 1 867 67 76 - 56 Web: , =20 -=20 NTS Vertrieb: [EMAIL PROTECTED]=20 NTS Support:[EMAIL PROTECTED]=20 NTS Training: [EMAIL PROTECTED]=20 -=20 =20 Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=26356t=26232 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
RE: QuizWare vs. Boson [7:26361]
Same format, same questions... Dvass Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=26370t=26361 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
