RE: Can't Disable Spanning Tree on 2980G [7:50009]
Hi Folks, Is anybody willing to trade in a November Lab date this year for next February? Regards, George. Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=50107t=50009 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
RE: T1 Cat5 Crossover Pinout (WIC-1DSU-T1) [7:47332]
Hi Kevin, Don't know if this will help but try rj45-8pin--T1-crossover-rj45-8pin.htm link found on page below: http://ftp.digi.com/support/techsupport/common/cables/async/ Let us know if it works. Regards, George. -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]] On Behalf Of Kevin Love Sent: 25 June 2002 01:50 To: [EMAIL PROTECTED] Subject: T1 Cat5 Crossover Pinout (WIC-1DSU-T1) [7:47332] Hey Team, I am trying to pass data through a WIC-1DSU-T1 to test it. In order to do this, I need to put a couple of modular routers back-to-back. I can handle the configuration if I can just get the right cable. I have cable and a crimper. Does anybody have any idea what pinout I would need to use to do this correctly? I have checked Cisco's web site and can't find anything. Thanks for your help! Kevin Love [EMAIL PROTECTED] Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=47386t=47332 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
FXS cards - 1751 [7:45977]
Guy, Any ideas why there are only to voice ports to be configured? Runcorn-1750sh ver Cisco Internetwork Operating System Software IOS (tm) C1700 Software (C1700-K8SV3Y7-M), Version 12.2(8)T1, RELEASE SOFTWARE (fc2) TAC Support: http://www.cisco.com/tac Copyright (c) 1986-2002 by cisco Systems, Inc. Compiled Sat 30-Mar-02 15:07 by ccai Image text-base: 0x80008108, data-base: 0x80F66930 ROM: System Bootstrap, Version 12.0(3r)T1, RELEASE SOFTWARE (fc1) Runcorn-1750 uptime is 0 minutes System returned to ROM by power-on System image file is flash:c1700-k8sv3y7-mz.122-8.T1.bin cisco 1750 (MPC860T) processor (revision 0x801) with 36864K/12288K bytes of memory. Processor board ID JAD06090DEV (2308858941), with hardware revision MPC860T processor: part number 0, mask 32 Bridging software. X.25 software, Version 3.0.0. 1 FastEthernet/IEEE 802.3 interface(s) 1 ATM network interface(s) 4 Voice FXS interface(s) 32K bytes of non-volatile configuration memory. 16384K bytes of processor board System flash (Read/Write) Configuration register is 0x210 Regards, George. Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=45977t=45977 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
ppp multilink over adsl????? [7:44704]
Guys, Will anybody know is ppp multilink is possible over an adsl link and does it work similar to isdn? Regards, George. Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=44704t=44704 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Help..... QPM [7:44519]
Guys, Just wondering if any of you will like know where to download an evaluation copy of the Quality of Service Policy Manager? An immediate response will be very much appreciated. Regards, George. Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=44519t=44519 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Cisco CallManager - ip phone registration [7:44530]
Would anybody know of how resolve and ip phone which just wouldn't register to the CCM. I can ping from CCM server and all but it keep going on and on a registering. George. Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=44530t=44530 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
RE: Cisco CallManager - ip phone registration [7:44530]
Thanks for your response. Checked the phones configs and it's all as expected i.e. IP's for cm server, tftp server etc are just fine. Any ideas?? -Original Message- From: Paul Beckman [mailto:[EMAIL PROTECTED]] Sent: 20 May 2002 17:39 To: 'George Siaw' Subject: RE: Cisco CallManager - ip phone registration [7:44530] Check you TFTP address. -Original Message- From: George Siaw [mailto:[EMAIL PROTECTED]] Sent: Monday, May 20, 2002 11:03 AM To: [EMAIL PROTECTED] Subject: Cisco CallManager - ip phone registration [7:44530] Would anybody know of how resolve and ip phone which just wouldn't register to the CCM. I can ping from CCM server and all but it keep going on and on a registering. George. Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=44536t=44530 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
RE: Cisco CallManager - IP phone registration [7:44530]
The below were the error message spilling out of CM eventvwr. No matter how many times I resetted the phone, phone registration was rejected by CM. The resolution however was to search and delete any trace of this troublesome phone from CM and voila it worked as a clockwork. Thanks guys!! Error: DeviceTransientConnection - Transient connection attempt. Connecting Port: 2000 Device name [Optional].: SEP003094C28F86 Device IP address.: 192.168.0.137 Device type. [Optional]: 7 Reason Code [Optional].: 1 App ID: Cisco CallManager Cluster ID: xxx-ccm-Cluster Node ID: 192.168.0.65 Explanation: A connection was established and immediately dropped before completing registration. Incomplete registration may indicate a device is rehoming in the middle of registration. The alarm could also indicate a device misconfiguration, database error, or an illegal/unknown device trying to attempt a connection. Recommended Action: No action is required if this event was issued as a result of a normal device rehome.. -Original Message- From: Rogell, Dennis [mailto:[EMAIL PROTECTED]] Sent: 20 May 2002 18:44 To: 'George Siaw' Subject: RE: Cisco CallManager - IP phone registration [7:44530] Are your phones pointing to the correct call manager, the reason I am asking is in my cipt class someone had the phone pointing to the backup instead of the primary Dennis Rogell CNE,NNSS,NNSE, CCNP nextiraone Email : [EMAIL PROTECTED] Phone: (954) 846-5128 -Original Message- From: George Siaw [SMTP:[EMAIL PROTECTED]] Sent: Monday, May 20, 2002 09:51 To: [EMAIL PROTECTED] Subject: RE: Cisco CallManager - ip phone registration [7:44530] Thanks for your response. Checked the phones configs and it's all as expected i.e. IP's for cm server, tftp server etc are just fine. Any ideas?? -Original Message- From: Paul Beckman [mailto:[EMAIL PROTECTED]] Sent: 20 May 2002 17:39 To: 'George Siaw' Subject: RE: Cisco CallManager - ip phone registration [7:44530] Check you TFTP address. -Original Message- From: George Siaw [mailto:[EMAIL PROTECTED]] Sent: Monday, May 20, 2002 11:03 AM To: [EMAIL PROTECTED] Subject: Cisco CallManager - ip phone registration [7:44530] Would anybody know of how resolve and ip phone which just wouldn't register to the CCM. I can ping from CCM server and all but it keep going on and on a registering. George. Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=44547t=44530 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Help..... QOS Policy Manager [7:44548]
Guys, I know the below message has already been pasted and I am however back at it as result of it's urgency. Would anybody know where or how I could get an evaluation copy of the above product? Your quick response will be very much appreciated. Thanks fellas. -Original Message- From: George Siaw [mailto:[EMAIL PROTECTED]] Sent: 20 May 2002 14:01 To: '[EMAIL PROTECTED]' Subject: Help. QPM Importance: High Sensitivity: Private Guys, Just wondering if any of you will like know where to download an evaluation copy of the Quality of Service Policy Manager? An immediate response will be very much appreciated. Regards, George. Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=44548t=44548 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Wanted!! Cisco CallManager 3.1 or 3.2 S/W for H/lab [7:42539]
Please reply directed. I am interested in purchasing a proper CCM CDs preferably with the installation books. Will pay for shipment and I am UK based. George. P.S. Anybody sat the 3.2 exams? Your views please. Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=42539t=42539 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
WANTED!!!! Cisco CallManager Starter Kit [7:41755]
Guys, I have had to revise my earlier request owing to a slight change in my requirement. The Cisco callmanager starter kit will suffice what I will like to achieve in a home lab. So, if anyone has any to sell, by all means reply directly to me. Cheers - George. Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=41755t=41755 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
WANTED!! MCS-7822/ COMPAQ DL320 [7:41630]
Guys, I urgently need to buy a secondhand callmanager kit and just wondering if any of you have one to sell or point me in the right direction. Thanks - George. Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=41630t=41630 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
CCIE Communication Services [7:39368]
Guys, Are there any such persons aboard? If so please be generous with your comments regarding the exams and more so the labs. Have already been to the website and it's not quite clear what exams are suppose to be taken. Your views on the written exams path are more than welcomed. Regards, George. P.S. God bless you richly today. _ Do You Yahoo!? Get your free @yahoo.com address at http://mail.yahoo.com Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=39368t=39368 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
ISL Trunking from a h/w's perspective [7:39246]
Guys, Any ideas as how I can configure isl trunking without an Sc0 port on the supervisor engines? Can I configure on of the ports to assume this position i.e. Sc0? If so what are the cmds? Regards, George. Configs as below: Console (enable) sh mod 1 Mod Module-Name Ports Module-Type ModelSerial-Num Status --- --- - - - - --- 1 ENGINE-10 Supervisor IIIWS-X5530 012144234 ok Mod MAC-Address(es)Hw Fw Sw --- -- -- -- - 1 00-50-f0-0c-64-00 to 00-50-f0-0c-67-ff 3.03.1.2 4.3(1a) Mod Sub-Type Sub-Model Sub-Serial Sub-Hw --- - -- -- 1 NFFC+WS-F5531 0012153640 1.0 Console (enable) sh mod Mod Module-Name Ports Module-Type ModelSerial-Num Status --- --- - - - - --- 1 ENGINE-10 Supervisor IIIWS-X5530 012144234 ok 2 ENGINE-20 Supervisor IIIWS-X5530 010867093 standby 3 CCIE_LAB-0 2410/100BaseTX Ethernet WS-X5224 012154555 ok 4 CCIE_LAB-1 2410/100BaseTX Ethernet WS-X5224 009616952 ok 5 CCIE_LAB-2 2410/100BaseTX Ethernet WS-X5224 016372420 ok Mod MAC-Address(es)Hw Fw Sw --- -- -- -- - 1 00-50-f0-0c-64-00 to 00-50-f0-0c-67-ff 3.03.1.2 4.3(1a) 2 00-50-f0-0c-64-00 to 00-50-f0-0c-67-ff 2.03.1.2 4.3(1a) 3 00-50-53-c4-42-08 to 00-50-53-c4-42-1f 1.43.1(1) 4.3(1a) 4 00-10-7b-83-36-d8 to 00-10-7b-83-36-ef 1.43.1(1) 4.3(1a) 5 00-30-b6-29-95-48 to 00-30-b6-29-95-5f 1.53.1(1) 4.3(1a) Mod Sub-Type Sub-Model Sub-Serial Sub-Hw --- - -- -- 1 NFFC+WS-F5531 0012153640 1.0 2 NFFC WS-F5521 0010866222 1.1 Console (enable) sh ver WS-C5505 Software, Version McpSW: 4.3(1a) NmpSW: 4.3(1a) Copyright (c) 1995-1998 by Cisco Systems NMP S/W compiled on Nov 23 1998, 15:22:34 MCP S/W compiled on Nov 23 1998, 15:19:30 System Bootstrap Version: 3.1.2 Hardware Version: 1.0 Model: WS-C5505 Serial #: 066526573 Mod Port Model Serial # Versions --- -- - 1 0WS-X5530 012144234 Hw : 3.0 Fw : 3.1.2 Fw1: 4.2(1) Sw : 4.3(1a) 2 0WS-X5530 010867093 Hw : 2.0 Fw : 3.1.2 Fw1: 4.2(1) Sw : 4.3(1a) 3 24 WS-X5224 012154555 Hw : 1.4 Fw : 3.1(1) Sw : 4.3(1a) 4 24 WS-X5224 009616952 Hw : 1.4 Fw : 3.1(1) Sw : 4.3(1a) 5 24 WS-X5224 016372420 Hw : 1.5 Fw : 3.1(1) Sw : 4.3(1a) DRAMFLASH NVRAM Module Total UsedFreeTotal UsedFreeTotal Used Free -- --- --- --- --- --- --- - - - 1 32640K 13381K 19259K 8192K 3984K 4208K 512K 116K 396K Uptime is 0 day, 0 hour, 13 minutes Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=39246t=39246 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
RE: ISL Trunking from a h/w's perspective [7:39246]
Do I need an Sc0 port when routing between Vlans? However, there's no uplink module on neither of my supervisor engines. Would you know a s/w work around without having to buy the module? George. -Original Message- From: Larry Letterman [mailto:[EMAIL PROTECTED]] Sent: 23 March 2002 00:17 To: George Siaw; [EMAIL PROTECTED] Subject: RE: ISL Trunking from a h/w's perspective [7:39246] You dont have to configure SC0 interface to do isl or dot1q. Its only needed for management, telnet etc... Larry Letterman Cisco Systems [EMAIL PROTECTED] -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of George Siaw Sent: Friday, March 22, 2002 3:45 PM To: [EMAIL PROTECTED] Subject: ISL Trunking from a h/w's perspective [7:39246] Guys, Any ideas as how I can configure isl trunking without an Sc0 port on the supervisor engines? Can I configure on of the ports to assume this position i.e. Sc0? If so what are the cmds? Regards, George. Configs as below: Console (enable) sh mod 1 Mod Module-Name Ports Module-Type ModelSerial-Num Status --- --- - - - - --- 1 ENGINE-10 Supervisor IIIWS-X5530 012144234 ok Mod MAC-Address(es)Hw Fw Sw --- -- -- -- - 1 00-50-f0-0c-64-00 to 00-50-f0-0c-67-ff 3.03.1.2 4.3(1a) Mod Sub-Type Sub-Model Sub-Serial Sub-Hw --- - -- -- 1 NFFC+WS-F5531 0012153640 1.0 Console (enable) sh mod Mod Module-Name Ports Module-Type ModelSerial-Num Status --- --- - - - - --- 1 ENGINE-10 Supervisor IIIWS-X5530 012144234 ok 2 ENGINE-20 Supervisor IIIWS-X5530 010867093 standby 3 CCIE_LAB-0 2410/100BaseTX Ethernet WS-X5224 012154555 ok 4 CCIE_LAB-1 2410/100BaseTX Ethernet WS-X5224 009616952 ok 5 CCIE_LAB-2 2410/100BaseTX Ethernet WS-X5224 016372420 ok Mod MAC-Address(es)Hw Fw Sw --- -- -- -- - 1 00-50-f0-0c-64-00 to 00-50-f0-0c-67-ff 3.03.1.2 4.3(1a) 2 00-50-f0-0c-64-00 to 00-50-f0-0c-67-ff 2.03.1.2 4.3(1a) 3 00-50-53-c4-42-08 to 00-50-53-c4-42-1f 1.43.1(1) 4.3(1a) 4 00-10-7b-83-36-d8 to 00-10-7b-83-36-ef 1.43.1(1) 4.3(1a) 5 00-30-b6-29-95-48 to 00-30-b6-29-95-5f 1.53.1(1) 4.3(1a) Mod Sub-Type Sub-Model Sub-Serial Sub-Hw --- - -- -- 1 NFFC+WS-F5531 0012153640 1.0 2 NFFC WS-F5521 0010866222 1.1 Console (enable) sh ver WS-C5505 Software, Version McpSW: 4.3(1a) NmpSW: 4.3(1a) Copyright (c) 1995-1998 by Cisco Systems NMP S/W compiled on Nov 23 1998, 15:22:34 MCP S/W compiled on Nov 23 1998, 15:19:30 System Bootstrap Version: 3.1.2 Hardware Version: 1.0 Model: WS-C5505 Serial #: 066526573 Mod Port Model Serial # Versions --- -- - 1 0WS-X5530 012144234 Hw : 3.0 Fw : 3.1.2 Fw1: 4.2(1) Sw : 4.3(1a) 2 0WS-X5530 010867093 Hw : 2.0 Fw : 3.1.2 Fw1: 4.2(1) Sw : 4.3(1a) 3 24 WS-X5224 012154555 Hw : 1.4 Fw : 3.1(1) Sw : 4.3(1a) 4 24 WS-X5224 009616952 Hw : 1.4 Fw : 3.1(1) Sw : 4.3(1a) 5 24 WS-X5224 016372420 Hw : 1.5 Fw : 3.1(1) Sw : 4.3(1a) DRAMFLASH NVRAM Module Total UsedFreeTotal UsedFreeTotal Used Free -- --- --- --- --- --- --- - - - 1 32640K 13381K 19259K 8192K 3984K 4208K 512K 116K 396K Uptime is 0 day, 0 hour, 13 minutes _ Do You Yahoo!? Get your free @yahoo.com address at http://mail.yahoo.com Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=39251t=39246 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
RE: ISL Trunking from a h/w's perspective [7:39246]
Thanks for all your responses. One last question though. For external router, routing between vlans if I have just one FastEthernet interface on the router can I route between vlans? George. -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]] On Behalf Of Scott H. Sent: 23 March 2002 00:53 To: [EMAIL PROTECTED] Subject: Re: ISL Trunking from a h/w's perspective [7:39246] The only time the SC0 interface comes into play is for telnet into the box. If you have any 100 MB ports on your switch, you can run trunking. set trunk (mod/port) on isl If this trunk is running into a router, you need to create the subinterfaces on the router to enable routing between VLANS. int fa1/0.100 ip address (the subnet of the vlan) encap isl (the vlan #) HTH, Scott George Siaw wrote in message [EMAIL PROTECTED]">news:[EMAIL PROTECTED]... Do I need an Sc0 port when routing between Vlans? However, there's no uplink module on neither of my supervisor engines. Would you know a s/w work around without having to buy the module? George. -Original Message- From: Larry Letterman [mailto:[EMAIL PROTECTED]] Sent: 23 March 2002 00:17 To: George Siaw; [EMAIL PROTECTED] Subject: RE: ISL Trunking from a h/w's perspective [7:39246] You dont have to configure SC0 interface to do isl or dot1q. Its only needed for management, telnet etc... Larry Letterman Cisco Systems [EMAIL PROTECTED] -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of George Siaw Sent: Friday, March 22, 2002 3:45 PM To: [EMAIL PROTECTED] Subject: ISL Trunking from a h/w's perspective [7:39246] Guys, Any ideas as how I can configure isl trunking without an Sc0 port on the supervisor engines? Can I configure on of the ports to assume this position i.e. Sc0? If so what are the cmds? Regards, George. Configs as below: Console (enable) sh mod 1 Mod Module-Name Ports Module-Type Model Serial-Num Status --- --- - - - - --- 1 ENGINE-10 Supervisor IIIWS-X5530 012144234 ok Mod MAC-Address(es)Hw Fw Sw --- -- -- -- - 1 00-50-f0-0c-64-00 to 00-50-f0-0c-67-ff 3.03.1.2 4.3(1a) Mod Sub-Type Sub-Model Sub-Serial Sub-Hw --- - -- -- 1 NFFC+WS-F5531 0012153640 1.0 Console (enable) sh mod Mod Module-Name Ports Module-Type Model Serial-Num Status --- --- - - - - --- 1 ENGINE-10 Supervisor IIIWS-X5530 012144234 ok 2 ENGINE-20 Supervisor IIIWS-X5530 010867093 standby 3 CCIE_LAB-0 2410/100BaseTX Ethernet WS-X5224 012154555 ok 4 CCIE_LAB-1 2410/100BaseTX Ethernet WS-X5224 009616952 ok 5 CCIE_LAB-2 2410/100BaseTX Ethernet WS-X5224 016372420 ok Mod MAC-Address(es)Hw Fw Sw --- -- -- -- - 1 00-50-f0-0c-64-00 to 00-50-f0-0c-67-ff 3.03.1.2 4.3(1a) 2 00-50-f0-0c-64-00 to 00-50-f0-0c-67-ff 2.03.1.2 4.3(1a) 3 00-50-53-c4-42-08 to 00-50-53-c4-42-1f 1.43.1(1) 4.3(1a) 4 00-10-7b-83-36-d8 to 00-10-7b-83-36-ef 1.43.1(1) 4.3(1a) 5 00-30-b6-29-95-48 to 00-30-b6-29-95-5f 1.53.1(1) 4.3(1a) Mod Sub-Type Sub-Model Sub-Serial Sub-Hw --- - -- -- 1 NFFC+WS-F5531 0012153640 1.0 2 NFFC WS-F5521 0010866222 1.1 Console (enable) sh ver WS-C5505 Software, Version McpSW: 4.3(1a) NmpSW: 4.3(1a) Copyright (c) 1995-1998 by Cisco Systems NMP S/W compiled on Nov 23 1998, 15:22:34 MCP S/W compiled on Nov 23 1998, 15:19:30 System Bootstrap Version: 3.1.2 Hardware Version: 1.0 Model: WS-C5505 Serial #: 066526573 Mod Port Model Serial # Versions --- -- - 1 0WS-X5530 012144234 Hw : 3.0 Fw : 3.1.2 Fw1: 4.2(1) Sw : 4.3(1a) 2 0WS-X5530 010867093 Hw : 2.0 Fw : 3.1.2 Fw1: 4.2(1) Sw : 4.3(1a) 3 24 WS-X5224 012154555 Hw : 1.4 Fw : 3.1(1) Sw : 4.3(1a) 4 24 WS-X5224 009616952 Hw : 1.4 Fw : 3.1(1) Sw : 4.3(1a) 5 24 WS-X5224 016372420 Hw : 1.5 Fw : 3.1(1) Sw : 4.3(1a) DRAM
CIPT and DQOS certs [7:38925]
Your comments the exams please! George. _ Do You Yahoo!? Get your free @yahoo.com address at http://mail.yahoo.com Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=38925t=38925 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
RE: CCIE Token Ring [7:38863]
Guys, Any truth in this? Cos that will be some welcoming news. Regards, George. -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]] On Behalf Of James Sent: 19 March 2002 21:42 To: [EMAIL PROTECTED] Subject: CCIE Token Ring [7:38863] Hello I have read in a previous post that the CCIE R/S program is dropping token ring stuff. Is that true or does anyone know when will that be effective ? Does anyone with experience with the lab know how much does the token ring stuff is needed ? Is it worth buying a Cat 3900 for a home lab or would getting online rack access work as fine ? any information is greatly appreciated. Thank you. __ Do You Yahoo!? Yahoo! Sports - live college hoops coverage http://sports.yahoo.com/ Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=38924t=38863 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
RE: VOIP billing [7:38756]
Check out the Avvid product line. I think Cisco Call manager has some functionality for billing. -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]] On Behalf Of Kiran Kumar M Sent: 19 March 2002 05:43 To: [EMAIL PROTECTED] Subject: VOIP billing [7:38756] Hai, Is there any billing solution available for VOIP in cisco products.?? Thanks, Kiran Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=38759t=38756 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
IOS MD5 checksum against router checksum. Who to believe? [7:38767]
Hi guys, I have a bit problem with this dilemma and just wondering whether something is out of place. The MD5 checksum on an IOS was calculated correctly to that on display on Cisco's web site. However, when the file was loaded on the router its checksum was different. Verifying checksum... invalid (expected 0x7081, computed 0x5944) Now would anybody know whether these checksums are suppose to compliment each other? Other defiling factors: Just loaded another image from the same source, link etc (everything same as previous and all went well). Any ideas guys or is this just one of those wieldos? Regards, George. [GroupStudy.com removed an attachment of type image/jpeg which had a name of image001.jpg] Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=38767t=38767 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
IOS Checksum checker apps [7:38555]
Hi guys, I am facing this delimma with 4500 router calculating a different checksum to that expected, no matter the internet connection used in downloading and also from different computers. Least, I blame the computer or link. Thus, my question is, is there some application somewhere which can check the ios's checksum before installing on router? This will invariably save me a bunch of time. Any ideas guys? Regards, George. _ Do You Yahoo!? Get your free @yahoo.com address at http://mail.yahoo.com Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=38555t=38555 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Tweaking a memory hungry IOS - 4500-M [7:38369]
Guys, Just wondering, is there a way to tweak an IOS with 32MB memory requirement to run on 16Mb without a software forced crash? It's a lab router so can afford Cisco's blue screen of death. George. _ Do You Yahoo!? Get your free @yahoo.com address at http://mail.yahoo.com Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=38369t=38369 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Help!! Token Ring + RJ45 [7:38372]
Hi Guys, Would anybody know if a standard CAT5/RJ45 cross over cable can connect two token ring devices? Both interfaces have RJ45 interfaces. If that will not work, could somebody tell me what the pinout is then suppose to be. Maybe, I have forgotten my concepts but can this stuff be connected back2back. Regards, George. _ Do You Yahoo!? Get your free @yahoo.com address at http://mail.yahoo.com Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=38372t=38372 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Exchange study material
Interested in exchanging any of these (cvoice/mcsn/checkpoint) course notes for that of catm. Please reply specifically to my mail address and not to the mail list if you're interested. George. __ Do You Yahoo!? Send instant messages get email alerts with Yahoo! Messenger. http://im.yahoo.com/ **NOTE: New CCNA/CCDA List has been formed. For more information go to http://www.groupstudy.com/list/Associates.html _ UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html FAQ, list archives, and subscription info: http://www.groupstudy.com Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Your comments please
Hi Everybody, If anyone has used CCIE Expert Labs Simulator, IP Routing: Cisco Interactive Mentor I will appreciate your view? Regards, George. ___ UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html FAQ, list archives, and subscription info: http://www.groupstudy.com Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
