Best ATM book
Can anyone recommend a good book for learning ATM. I would like something with a lot of simple lab setups and examples. Has anyone used the 3 volume set "ATM Reference Library" recommended by Cisco? Isn't there a book that will give me enough detail to get my CCIE without reading 3 volumes? Thanks, Glenn ________ Glenn Flood CCNP, MCSE, MCP+I, MCT, CNA
NT or Linux as a TACACS+ or RADIUS Server
All, Is it possible to set up NT or Linux as a TACACS or RADIUS Server? If so where can I get the appropriate software. Thanks,Glenn
On line Routers and Switches [7:31013]
Hi all, I haven't touched a router or switch in about 6 months and was wondering if someone had a lab setup on line that I could log into for a few hours so that I could brush up on my skills again. Please respond to the email below if you don't want to share it with the entire group. Thanks, Glenn [EMAIL PROTECTED] CCNP, MCSE Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=31013&t=31013 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
CIT next week
All, I am taking CIT next week and need some advice from people that have taken this exam recently. Are there any fill-in-the-blanks like on ACRC? I am having a lot of trouble the Boson "packet trace" questions. Are the many of these type on the test? Are there a lot of IPX and AppleTalk questions? token Ring? Is there a main area of troubleshooting that is focused on? Thanks, Glenn ____ Glenn Flood MCSE, MCP+I, MCT, CCNA, CNA, A+
Encapsulation ISL on Ethernet??
All, I am trying to configure lab #78: ISL Trunk with Routing between VLAN's, in the "All in one CCIE Lab Study Guide" and am unable to find an encapsulation isl command available under int e0/0? Can this be done? Or is it more of the errata that I have heard about this book? Thanks, Glenn ________ Glenn Flood MCSE, MCP+I, MCT, CCNA, CNA, A+
Loaded new IOS and now router will not boot
All, I have a 2621 with 8M flash and 24M RAM and loaded the Enterprise Plus 12.1(3) IOS. Now it tells me "INSUFFICIENT MEMORY TO BOOT THE IMAGE!. Can someone direct me to the procedure on the Cisco site that will show me how to reload my previous image through rommon. Thanks, Glenn ____ Glenn Flood MCSE, MCP+I, MCT, CCNA, CNA, A+
RE: Loaded new IOS and now router will not boot
Russ, Worked great! I used the tftpdnld. Good stuff to know. Thanks again, Glenn -Original Message-From: Russell Lusignan [mailto:[EMAIL PROTECTED]]Sent: Wednesday, July 19, 2000 1:44 PMTo: [EMAIL PROTECTED]Subject: Re: Loaded new IOS and now router will not boot You have to do an Xmodem upload through the console port. This should give you some more info on it: http://www.cisco.com/univercd/cc/td/doc/product/access/acs_mod/cis2600/2600hig/rom.htm Hope that helps Russ.. "Glenn Flood" <[EMAIL PROTECTED]> wrote in message [EMAIL PROTECTED]">news:[EMAIL PROTECTED]... All, I have a 2621 with 8M flash and 24M RAM and loaded the Enterprise Plus 12.1(3) IOS. Now it tells me "INSUFFICIENT MEMORY TO BOOT THE IMAGE!. Can someone direct me to the procedure on the Cisco site that will show me how to reload my previous image through rommon. Thanks, Glenn ____ Glenn Flood MCSE, MCP+I, MCT, CCNA, CNA, A+
RE: Technical Question
My $.02 I currently have four NIC cards installed in a computer running NT 4.0 Server. 1 - Token ring, 1 - 10/100 Ethernet, 1 - FDDI DAS and 1 - ATM adapter. It can be done without too much difficulty, just have be careful that each one is on a different interrupt. Glenn -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]] Sent: Thursday, July 20, 2000 9:38 AM To: [EMAIL PROTECTED] Cc: [EMAIL PROTECTED] Subject: Re: Technical Question Hi Bruce, Yes. It is possible to configure 2 NICs in the same PC. You can also multinet (assign both IPs to the same NIC without adding another physical NIC). Keep in mind though, that NetBIOS will only bind to one of these logical interfaces. From the description of what services you are accessing, this does not seem to be an issue. You will also need to set up some static routes on the NT box, to ensure that the proper paths are taken. This may be the cleanest solution. I have done this type of scenario over NT, but have not tried to do this over 95/98, although I do believe it's possible. I can also think of a more sophisticated way in which this could be handled, although it is probably a little over the top. A) Configure the client with an address within your assigned network (subnet of your router). B) Multinet your router (to also contain an IP within AT&Ts assigned range). C) configure a static route on your router to allow a path to the Notes server, via the AT&T router. D) Configure address translation on your router to translate your address to an address within the AT&T assigned range, such as the address you multinet to the router's interface. Good Luck and Have FUN! Tom Kager ___ UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html FAQ, list archives, and subscription info: http://www.groupstudy.com Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] ___ UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html FAQ, list archives, and subscription info: http://www.groupstudy.com Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
BSCN Exam Questions
All, Could someone please tell me the total number of questions, passing score etc. on the new BSCN test. Also, are there "fill-in-the-blank" type questions etc. How much BGP do you have to know? What about access lists, dial-up networking etc. Thanks, Glenn
Routers for sale
I know that this is not the place to do this but I need to pay some bills. I have two routers that I am about to put on eBay but though someone in the group could use them for their lab. 1) Cisco 4500m+ w/1 Ethernet, 2 Token Ring and 4 Serial interfaces 1) Cisco 2611 w/4 port A/S AIM module Can be sold together or individually. Make me an offer. Thanks, Glenn
RE: Bcran cisco 700?
I wrote the same exam about two months ago and had for or five. Glenn -Original Message- From: Daniel Boutet [mailto:[EMAIL PROTECTED]] Sent: Wednesday, August 23, 2000 2:53 PM To: [EMAIL PROTECTED] Subject: Re: Bcran cisco 700? I wrote the exam on august fifteen and no question on 700 series routers. "Rishard Chapoteau" <[EMAIL PROTECTED]> wrote in message news:8nrifj$7uh$[EMAIL PROTECTED]... > Are there questions about the cisco 700, and how to configure it, on the > bcran exam? Thanx. > > Rishard > > ___ UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html FAQ, list archives, and subscription info: http://www.groupstudy.com Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] ___ UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html FAQ, list archives, and subscription info: http://www.groupstudy.com Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
RE: licensing software
Microsoft SMS (Systems Management Server) 2.0. It will also distribute software updates, software metering and tons more. It's a big package to learn but well worth the effort. Glenn -Original Message- From: Dave Santeramo [mailto:[EMAIL PROTECTED]] Sent: Monday, June 05, 2000 1:52 PM To: [EMAIL PROTECTED] Subject: OT: licensing software Need a software package that will inventory all the software and hardware on my NT based network. Any suggestions? ___ To get your own FREE ZDNet Onebox - FREE voicemail, email, and fax, all in one place - sign up today at http://www.zdnetonebox.com ___ UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html FAQ, list archives, and subscription info: http://www.groupstudy.com Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] ___ UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html FAQ, list archives, and subscription info: http://www.groupstudy.com Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
What do I need for ATM
Hey, I am trying to get my hardware together for an ATM lab and am a little unsure as to what equipment I will need to be best prepared for the CCIE lab. I have a Cat5000 with Sup II a 4500 and couple of 4000 series routers. I know that I will need an interface for 4500 and also for the Cat5000. Currently there is a WS-X5158 blade on eBay and do not know if this will do what I need or not. Do I need a Lightstream 1010? Please advise. Thanks, Glenn
RE: connect routers together with Token ring interface
Daniel, Yes, you need what is called a MAU or Multistation Access Unit. I have two on eBay that I am selling. They are both IBM 8228's and are in perfect condition. http://cgi.ebay.com/aw-cgi/eBayISAPI.dll?ViewItem&item=357452542 You will also need some cables to connect it all together. Sorry, but I am still using all mine. But, if you do a search on eBay under the networking category for "Token Ring", you will find everything else that you need. You might also want to consider getting a couple of TR NIC cards so that you can put a few PC's on the ring. Hope this helps. Glenn -Original Message- From: Daniel Ji [mailto:[EMAIL PROTECTED]] Sent: Thursday, June 15, 2000 5:39 PM To: [EMAIL PROTECTED] Subject: connect routers together with Token ring interface Hi, Can anyone tell me how to connect two routers with token ring interface? you connect 2 routers with enthernet interfaces by connecting them to a enthernet hub, is there anything like token ring hub? Thanks in advance. Daniel CCNA ___ UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html FAQ, list archives, and subscription info: http://www.groupstudy.com Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] ___ UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html FAQ, list archives, and subscription info: http://www.groupstudy.com Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
RE: CCNP Class question
2K per year? Your kidding right? I would get this changed to at least 10K per or find another company. Glenn -Original Message- From: Nat Heidler [mailto:[EMAIL PROTECTED]] Sent: Thursday, June 22, 2000 8:10 AM To: [EMAIL PROTECTED] Subject: CCNP Class question This is for anyone that has taken any of the CCNP classes from an authorized Cisco trainer. I found out yesterday that I get $2K per calender year to train. I want to use this for a Cisco class. My question is this: what test and/or class is the most difficult, or what class of the CCNP track should I take that I will get the most benefit from in a formal setting. I passed the CCNA on self study and am pretty comfortable w/router setup, etc. Any comments would be greatly appreciated. Nat Heidler Network Administrator, City of Olathe, KS CCNA, MCSE, CNA ___ UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html FAQ, list archives, and subscription info: http://www.groupstudy.com Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] ___ UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html FAQ, list archives, and subscription info: http://www.groupstudy.com Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
4500 & 4000 IOS ver compatibility
All, I have a 4500M and a 4000 series routers and would like to upgrade the IOS on the 4000 with the newer enterprise image on the 4500M. Has anyone done this before? Are the IOS versions compatible between the two routers? Any advice would be welcomed. Thanks, Glenn
4500 & 4000 IOS versions
All, I have a 4500M and a 4000 series routers and would like to upgrade the IOS on the 4000 with the newer enterprise image on the 4500M. Has anyone done this before? Are the IOS versions compatible between the two routers? Any advice would be welcomed. Thanks, Glenn
SmartNet & software updates
All, I desperately need to upgrade the IOS on my 2621 to ver 12.0(?) Enterprise release so that I can get through some labs and was wondering if someone could advise me on how SmartNet works. If I buy a contract will this enable me to upgrade to a better IOS? Or am I just better off buy the upgrade IOS? Thanks, Glenn Glenn Flood MCSE, MCP+I, MCT, CCNA, CNA, A+