RE: help, catalyst 5500 console connectivity. [7:16523]
use a straight thru cable...Depends on the sup eng. as to what cable you use. -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of Anand Ghody Sent: Monday, August 20, 2001 8:27 AM To: [EMAIL PROTECTED] Subject: help, catalyst 5500 console connectivity. [7:16523] I just bought a catalyst 5505 from ebay and I am having trouble with the console port. I am using one of the console cables that I use with some other cisco routers. My hyperterminal terminal setting are 9600-8-none-1, no flow control. the switch when booted goes through its diagnostics and boots fine. everything looks good except I can not connect to it to configure it. Do the cataylst use a pinout different than that of a router. Any one got any ideas? Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=17086t=16523 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
RE: LSA type-5 suppression across OSPF area boundaries?? [7:12235]
I agree with the last post. We did this similar simulation in a lab setup for pre-production implementation on our network. NSSA area works great.Keeps LSA type 7's in the NSSA and then if you want you can translate type 7's to type 5 LSA's at the ABR to area 0.0.0.0 Good reference is John T. Moy's OSPF Anatomy of an Internet Routing Protocol and Cisco Press Routing TCP/IP Volume I.John's book gives you the industry standard view of OSPF and the Cisco Press book will give you Cisco specific issues as well. Check out Chapter 9 page 482 in the Cisco book. Hope this helps! Jerrold -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of Allen Sent: Thursday, July 12, 2001 8:07 PM To: [EMAIL PROTECTED] Subject: Re: LSA type-5 suppression across OSPF area boundaries?? [7:12218] What about making the area between the ASBR and ABR a not so stubby area (NSSA). If these are Cisco routers you could then use the summary-address command on the ASBR to summarize the external routes. The ABR will then convert the type 7 NSSA LSAs to type 5 LSAs. What do you think wrote in message [EMAIL PROTECTED]">news:[EMAIL PROTECTED]... hi all, have a problem that has been nagging at me for a good long time now... say you have a pair of ABRs sitting at an OSPF area boundary, and an ASBR is originating Type-5 LSAs from inside the non-backbone area. Is there an easy way to suppress the propagation of the type-5s outside the area? I would have a range statement on the ABRs to advertise the area aggregate, I just want to suppress the more specifics. I have tried using 'distribute-list out ' which would do it for me, but for some reason IOS won't allow this with OSPF: router(config)#router os 1 router(config-router)#distribute-list 1 out FastEthernet 0/0 % Interface not allowed with OUT for OSPF router(config-router)# I suppose that allowing this could potentially screw up routing if done without some care, but JunOS lets you do exactly this sort of thing - you can produce some wacky policies, but at least you have the option ;-) btw - I know I could prolly do this with multiple OSPF instances and redistribute between them, but I *really* don't want to get into this level of complexity. thanks in advance - this one has been driving me mad Andy Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=12235t=12235 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
RE: LSA type-5 suppression across OSPF area boundaries?? [7:12236]
Setting up the ASBR in an NSSA area will work. We connected a Nortel CVX to two Extreme Networks Layer 3 switches acting as the ABR'S then off to two more layer 2 switches then to two Cisco 7200 routers in a lab. We were able to keep the LSA type 7's in the NSSA area. It works just fine. With the Extreme L3 boxes we could use the translate option to translate LSA type 7 to LSA type 5 through the ABR's. Jerrold -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of John Neiberger Sent: Thursday, July 12, 2001 5:40 PM To: [EMAIL PROTECTED] Subject: Re: LSA type-5 suppression across OSPF area boundaries?? [7:12212] Could you accomplish this by making the area containing the ASBR a stubby area? IIRC, you can put an ASBR inside a stubby area but the Type-5 LSAs will not leave the area. I'm not sure about that, but I'd swear I read that somewhere recently. Okay, I just checked this in Giles, 2nd edition. According to him, the above is true. But who knows if it works in the real world. Good luck! John [EMAIL PROTECTED] 7/12/01 1:58:11 PM hi all, have a problem that has been nagging at me for a good long time now... say you have a pair of ABRs sitting at an OSPF area boundary, and an ASBR is originating Type-5 LSAs from inside the non-backbone area. Is there an easy way to suppress the propagation of the type-5s outside the area? I would have a range statement on the ABRs to advertise the area aggregate, I just want to suppress the more specifics. I have tried using 'distribute-list out ' which would do it for me, but for some reason IOS won't allow this with OSPF: router(config)#router os 1 router(config-router)#distribute-list 1 out FastEthernet 0/0 % Interface not allowed with OUT for OSPF router(config-router)# I suppose that allowing this could potentially screw up routing if done without some care, but JunOS lets you do exactly this sort of thing - you can produce some wacky policies, but at least you have the option ;-) btw - I know I could prolly do this with multiple OSPF instances and redistribute between them, but I *really* don't want to get into this level of complexity. thanks in advance - this one has been driving me mad Andy Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=12236t=12236 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
