Getting to the router console via a Unix Workstation
Hello All, I'm new to Unix. I have a Sun Ultra 10 workstation. I want to connect the router console cable to this workstation and access the router. What software do I use to accomplish this? If I was in Windows NT, I would use Hyperterminal and setup the connection. I know Unix has a terminal program, but is this what I use to make the console connection? Any help would be appreciated. Kamoto __ Do You Yahoo!? Send instant messages & get email alerts with Yahoo! Messenger. http://im.yahoo.com/ ___ UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html FAQ, list archives, and subscription info: http://www.groupstudy.com Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: CCNP and chances of finding a job
Ken I received my CCNP almost two months ago. About 2 weeks after receiving the cert, I started firing off my resume everywhere. I received a call from Cisco, as they were interested in my background. I passed the phone screening, then passed the brutal face to face interviews at Cisco with about 7 people. I'm now working with the IOS WAN Test team. Before this job, I had about 10 years of experience with desktop computers, network servers and Microsoft products. I had a MCSE and a Compaq ASE. I made the switch to Cisco as I see problems down the road for Microsoft. I think Sprint Paranet will also hire you with a CCNP. Now the task of getting a CCIE should be achievable since Cisco gave me my very own testbed loaded with seven routers. Good Luck. Ken [EMAIL PROTECTED] > "ken" <[EMAIL PROTECTED]> wrote in message > 000e01bfc5c5$bfdfaf00$0201a8c0@isamu">news:000e01bfc5c5$bfdfaf00$0201a8c0@isamu... > What are the chances of a CCNP finding a job without > prior work experience > with routers and such? I'm debating this issue with > my girfriend. She > thinks that job experience is more important, and > that I should be looking > for a job to move me up. I, on the other hand, > don't think I can find much > of a job with just a CCNA and would rather get a > CCNP, but I'm not quite > sure if just a CCNP by itself can land me a job. Any > help would be > appreciated. > > >-ken > > > > ___ > UPDATED Posting Guidelines: > http://www.groupstudy.com/list/guide.html > FAQ, list archives, and subscription info: > http://www.groupstudy.com > Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] __ Do You Yahoo!? Kick off your party with Yahoo! Invites. http://invites.yahoo.com/ ___ UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html FAQ, list archives, and subscription info: http://www.groupstudy.com Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: Frame Relay on back-to-back routers (without FR switches)
Remember, frame relay is an Interface Specification only. Frame Relay specifies how a user device such as a router delivers info to a WAN for transmission. So he could set encapsulation frame-relay on each router, but what good that would do I don't know. You can test F/R back to back as a PVC but I would do it right and set one up with frame-relay switching Ken --- Dale Holmes <[EMAIL PROTECTED]> wrote: > Without a switch, in what way is it Frame Relay? > > > >From: quezada <[EMAIL PROTECTED]> > >Reply-To: quezada <[EMAIL PROTECTED]> > >To: [EMAIL PROTECTED] > >Subject: Re: Frame Relay on back-to-back routers > (without FR switches) > >Date: Mon, 05 Jun 2000 11:59:37 -0400 > > > >I want to know if we can run Frame Relay between > two > >routers back to back without FR switches ? > > > >yes you can > > > >you probably would want a frame relay switch to > practice hub and spoke > >and other nice things ;but you can run frame realy > over a back to back > >connection > > > > > > > Get Your Private, Free E-mail from MSN Hotmail at > http://www.hotmail.com > > ___ > UPDATED Posting Guidelines: > http://www.groupstudy.com/list/guide.html > FAQ, list archives, and subscription info: > http://www.groupstudy.com > Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] __ Do You Yahoo!? Yahoo! Photos -- now, 100 FREE prints! http://photos.yahoo.com ___ UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html FAQ, list archives, and subscription info: http://www.groupstudy.com Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: ATM
Oscar, ATM is a WAN technology mostly. Think of it this way, X.25 can trunk over Frame Relay Frame Relay can trunk over X.25 Frame Relay can trunk over ATM SMDS can trunk over ATM. ATM can trunk over none of these WAN technologies. because they don't support Quality of Service. You can do Frame Relay over ATM (Called Network Interworking) in which you have Frame Relay on both ends of the network with ATM in the middle, or you can do Frame Relay With an ATM end System (Called Service Interworking) where Frame Relay is on one end and ATM is on the other. ATM isn't real popular in the LAN environment because of gigabit ethernet. However I'll think you may see this change sometime in the future. Regards Ken --- Oscar Rau <[EMAIL PROTECTED]> wrote: > Hello, > > This is a very basic question about ATM. Since ATM > is a LAN technology, > I would like to know the maximum distance of ATM > network. I would like to > know if it can be implemented on a very wide campus > network as the backbone. > > If ATM is used in a MAN network backbone, what type > of connections are used > between the differrent regions in the MAN? Is fiber > used for connecting the different > regions or is it a Frame Realy, ISDN type of > connection? > > Thanks for any info. > > -- > > Oscar Rau > [EMAIL PROTECTED] > > ___ > UPDATED Posting Guidelines: > http://www.groupstudy.com/list/guide.html > FAQ, list archives, and subscription info: > http://www.groupstudy.com > Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] __ Do You Yahoo!? Yahoo! Photos -- now, 100 FREE prints! http://photos.yahoo.com ___ UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html FAQ, list archives, and subscription info: http://www.groupstudy.com Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: ATM
802.1P will probably give Gigabit Ethernet the features needed to push ATM to the WAN only. Only time will tell. --- Mark Holloway <[EMAIL PROTECTED]> wrote: > You honestly think ATM is going to take over > Gigabit? ATM had its chance in > the LAN and lost. OC-12 is way more expensive than > Gigabit, plus the hassle > of LANE. In addition, ATM probing equipment is much > more expensive than > packet based equipment. Although I hate 3Com, the > invaded the market a few > yeras ago with their Corebuilder 7000 Cell based > switches and they basically > sucked the big one. There have been numerous > clients who have migrated away > from the CB7000 platform and changed vendors rather > than buying into 3com's > CB9000 Gigabit switch, which is ultimately why they > left the Enterprise > business. ATM on the WAN is still growing rapidly, > but ATM on the LAN is > dead. The only customers still purchased equipment > for LANE are those who > don't have the budget to migrate their existing > equipment to Gigabit. > > - Original Message - > > > ATM isn't real popular in the LAN environment > > because of gigabit ethernet. However I'll think > > you may see this change sometime in the future. > > > > Regards Ken > re violations to [EMAIL PROTECTED] > __ Do You Yahoo!? Yahoo! Photos -- now, 100 FREE prints! http://photos.yahoo.com ___ UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html FAQ, list archives, and subscription info: http://www.groupstudy.com Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Frame Relay Interworking with ATM
I have the following router config: ++ ATM3/1/2++ | 3640 |-| LS1010 | S1/3 ++ATM2/0 ++ (DCE) |ATM3/1/3 | | | |ATM6/0 +-+ | 7206| +-+ |S4/0 | (DCE) I'm trying to get frame relay to go across the LS1010 ATM switch. I have a connect statement on the 3640 Router "connect test serial1/3 300 atm2/0 1/32 network-interworking", but I'm not sure how the frame relay portion should be setup. Would you do a frame-relay route statement which references the ATM card? Would you use frame-relay map statements? Any help would be most appreciated. Kamoto __ Do You Yahoo!? Yahoo! Photos -- now, 100 FREE prints! http://photos.yahoo.com ___ UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html FAQ, list archives, and subscription info: http://www.groupstudy.com Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Frame/Relay with 2 Switches in the middle
If you have the following Frame Relay setup in a lab, how would you configure the routers due to the multiple switches. +--+S3 +--+S1/2+--+S1/0 | 4000 || 3640 ||3640-1| | || F/R || F/R |--+ | ||Swtchng|Swtchng | |--+S1/3+--+S1/1+--+ | | S0/0 | +--+--+ | 2600 | | | +--+ I tackled this as simple frame relay switching between the 4000 S3 Int, and the 3640-1 S1/1 Int. Everything works, and I can ping back and forth. However, I can't seem to figure out how to extend the frame-relay DLCI configs so that I can now get to the 2600 S0/0 Int. I actually tried the reverse, and setup frame-relay switching between the 2600 S0/0 Int, and the 3640 S1/2 Int and everything works. However, same problem, I can't go any further to the S3 Int on the 4000. Would you use the CONNECT command on one of the frame-relay switches? Or would I simply have each F/R switch router setup with FR Route statements acting like a chain through the 2 switches. Thanks Much Kamoto __ Do You Yahoo!? Send instant messages with Yahoo! Messenger. http://im.yahoo.com/ ___ UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html FAQ, list archives, and subscription info: http://www.groupstudy.com Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
InverseArp Compared to ODR
If you have a frame-relay network, ODR is designed for Hub and Spoke connections so that you don't need to type IP route statements. I was under the assumption that InverseArp completed this process for you. Is the true difference then, that you can redistribute ODR into OSPF or other such protocol? If I'm totally off base please advise. Kamoto __ Do You Yahoo!? Send instant messages with Yahoo! Messenger. http://im.yahoo.com/ ___ UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html FAQ, list archives, and subscription info: http://www.groupstudy.com Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
RE: Need help
Try the following and see if it works. I was provided this information by a colleague. Are you trying to set up a back-to-back connection using ISDN ? If that's the case, on the peer serial0:23 interace, you need to issue the command ISDN network. This simulates the network (switch) side of the ISDN connection. You can verify that by doing 'show isdn status' and it should say '**network side configuration'. Be careful with clock sources tho. Generally I make the side which is acting as the network use the internal clock. This can be done by doing 'clock source internal' on the t1 controller Regards Kamoto --- Daniel Cotts <[EMAIL PROTECTED]> wrote: > First you need two routers with an ISDN BRI > interface. Note some have a U > interface for USA connections while others have an > S/T interface that is > used in the rest of the world. Note that a NT-1 > adapter converts the S/T on > the router to interact with the U provided by the > Telco. > To connect them you must either have the Telco > provide ISDN service or > purchase an ISDN simulator. Two manufacturers of > simulators are: > 1) Arca Technologies - call Dean Coleman > 800-888-1978 ext 252 also > www.arca.com Lotsa toys! > 2)Teltone check out www.teltone.com or talk to > communications distributors > such as Graybar or Anixter, etc. Also Specialized > Products 800-866-5353. > Good service but most likely not the lowest price. > Simulators are expensive. > > > -Original Message- > > From: [EMAIL PROTECTED] > [mailto:[EMAIL PROTECTED]] > > Sent: Thursday, June 29, 2000 8:23 PM > > To: [EMAIL PROTECTED] > > Subject: Need help > > > > > > Any Ideas on how can I configure a lab network to > simulate > > ISDN can a cisco > > router do this job if yes which router. > > > > Regards, > > Amir > > > > ___ > > UPDATED Posting Guidelines: > http://www.groupstudy.com/list/guide.html > > FAQ, list archives, and subscription info: > http://www.groupstudy.com > > Report misconduct and Nondisclosure violations to > [EMAIL PROTECTED] > > > > ___ > UPDATED Posting Guidelines: > http://www.groupstudy.com/list/guide.html > FAQ, list archives, and subscription info: > http://www.groupstudy.com > Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] __ Do You Yahoo!? Get Yahoo! Mail - Free email you can access from anywhere! http://mail.yahoo.com/ ___ UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html FAQ, list archives, and subscription info: http://www.groupstudy.com Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
