If you have the following Frame Relay setup in a
lab, how would you configure the routers due to the
multiple switches.
+------+S3 +------+S1/2 +------+S1/0
| 4000 | | 3640 | |3640-1|
| |--------| F/R |--------| F/R |------+
| | |Swtchng |Swtchng |
|------+ S1/3+------+ S1/1+------+ |
|
S0/0 |
+------+------+
| 2600 |
| |
+------+
I tackled this as simple frame relay switching
between the 4000 S3 Int, and the 3640-1 S1/1 Int.
Everything works, and I can ping back and forth.
However, I can't seem to figure out how to extend
the frame-relay DLCI configs so that I can now
get to the 2600 S0/0 Int.
I actually tried the reverse, and setup frame-relay
switching between the 2600 S0/0 Int, and the 3640
S1/2 Int and everything works. However, same problem,
I can't go any further to the S3 Int on the 4000.
Would you use the CONNECT command on one of the
frame-relay switches? Or would I simply have each
F/R switch router setup with FR Route statements
acting like a chain through the 2 switches.
Thanks Much
Kamoto
__________________________________________________
Do You Yahoo!?
Send instant messages with Yahoo! Messenger.
http://im.yahoo.com/
___________________________________
UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
FAQ, list archives, and subscription info: http://www.groupstudy.com
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
