Re: Cable Modem DHCP problem [7:47175]
config t int e0 (whichever is connected to cable modem) mac-address .. I usally just change my mac-address and it will get a new ip and then you can change it back after that. Rick McHugh Randy wrote in message [EMAIL PROTECTED]">news:[EMAIL PROTECTED]... Does anyone know how to release a DHCP lease on a 2514 eth interface? I would like to release the lease recieved from the cable modem (comcast) . I have tried powercycling the modem, router, reload, shuting the interface ect and nothing works. I get the same lease all the time and cant get out to the internet. thanks Randy Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=47206t=47175 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
RE: Switch Messages [7:47005]
Let me guess, 4000 switches ? I would open up a TAC case, and get the blades changed. This is what we had to do. Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=47158t=47005 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
RE: 40x/50x counting towards CCNP [7:45993]
According to the website, the 50x exams can be substituted for 60x exams towards your ccnp. It doesnt mention the 40x anymore. So i think you need to take 3 more to get your ccnp. Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=46050t=45993 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
RE: It's Official - CCNP 6xx series [7:45867]
You can still take the 640-500 series for CCNP. You just have to take it in Japanese. Kanichiwa! Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=45900t=45867 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
trying to test ISDN [7:45786]
Im trying to get ISDN backup to work, but as i am debugging dialer packets, I am seeing this. BRI0: Dialing cause ip (s=10.3.101.13, d=224.0.0.10) BRI0: Already 255 call(s) in progress on BRI0, dialing not allowed I have never seen this msg before. Anyone know what this means? Is there a loop somewhere? Thanks In Advance James Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=45786t=45786 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
RE: trying to test ISDN [7:45786]
Yes, we are running EIGRP, and someone put in an permit any any statement in. I removed that but ISDN is still not dialing. if i look at the history, it shows it has dialed successfully a few weeks ago. The IOS is 11.2(5)P so i cannot force a call to test connectivity with the carrier switch. layer 1 is active, spids are assigned, Im pretty much at a loss. The person on the other end did say that on the external NT1 the LP LED was lit. I will follow through with the carrier. Thanks Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=45794t=45786 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
RE: trying to test ISDN [7:45786]
WE have serveral branches that have passive int on the bri0 and we do use floating static routes. What i ended up doing was removing the config from the bri, reloading the router, entered the switch type and spids and it dialed fine. Thanks all for the suggestions. James Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=45800t=45786 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
RE: Basic ISDN BRI config needed [7:45416]
Can we see the rest of your configs. If you have a passive interface, without a static route, you wont be able to ping. Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=45435t=45416 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
RE: VLANS [7:42932]
Damian Rizzo is the vlan man. If he can't do it Noone can. Uh Rich. Mind if i call you dick. Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=43159t=42932 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: WS-C1900C [7:42173]
1924-A and 1924-EN are capable fo running CLI. 1924-A must have the firmware upgraded to Enterprise. Both switches are half the size of the 1900C, and have an rj45 console port, as opposed to the 9 pin console port. the 1900cs are not upgradeable to CLI. Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=42184t=42173 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
RE: Rack [7:38796]
Damian Rizzo eats poo. Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=39407t=38796 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
RE: Rack [7:38796]
Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=39101t=38796 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: Rack [7:38796]
I have a link at work, i dont have it here. Its a midwest company with very cheap racks. 60-150$ I'll post the link from work. Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=38961t=38796 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
RE: CLI for 1900 Switch [7:37802]
If the size of your 1900 cat is that of a pizza box, with a 9 pin console port, then you can not run CLI. If its half the size of one, with an rj45 console port, you need the Enterprise version of IOS to run CLI. Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=37806t=37802 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
RE: Ebay seller [7:36824]
I bought 2 2501 routers from ojick, and have not had any issues. I was happy with what i got. Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=36843t=36824 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
RE: Cisco equipment [7:33664]
the router prices you were quoted were very good, however memory/flash considerations should be looked at. 1924-a/en and 2924-xl can be gotten for less on ebay (300$ and 550) respectively, modules can be gotten for less on ebay as well. Definately look into buying the routers though. Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=33709t=33664 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
RE: Director Replication - NT4.0 via a Wan Helpppppppp [7:33374]
If you want to replicate directories to your BDC's across the WAN, add the NetBIOS name of the computer to the To List on the export server (PDC) Without the NB name, it will never receive the broadcast from the Export server. Juan Blanco wrote: Team, I have the following problem, I am setting up a director replication in which I will be able to replicate all users login scripts regardless of how authentication is done by the PDC or any BDC. Everything is configured properly (directory replication) and works without problem at the Frame-Relay Hub but it does not work at any of the Frame-Relay spokes, It is not working accross the WAN. Any tips or suggestion is appreciated. Network logical layout: Windows NT 4.0 One Domain 7 sites via Frame-Relay Hub-and-Spoke The network is fully functional except directory replication Thanks, Juan Blanco MCSE, CCNA, CCNP, CCDA, CCDP(one day CCIE) Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=33396t=33374 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
RE: Carrier Transitions : Any Comments [7:30829]
If this becomes persistent, along with having the tech check the sj, Have them run head to head with his test set. Do it after hours if you do not have a backup line. Ole Drews Jensen wrote: Thanks Larry, I've asked the tech to call me anytime tonight when they've finished the test, and if the story is the same as earlier today, I will insist on having the telco dispatched to check the SmartJack. Ole ~~~ Ole Drews Jensen Systems Network Manager CCNP, MCSE, MCP+I RWR Enterprises, Inc. [EMAIL PROTECTED] ~~~ http://www.RouterChief.com ~~~ NEED A JOB ??? http://www.oledrews.com/job ~~~ -Original Message- From: Puckette, Larry (TIFPC) [mailto:[EMAIL PROTECTED]] Sent: Thursday, January 03, 2002 5:11 PM To: 'Ole Drews Jensen'; [EMAIL PROTECTED] Subject: RE: Carrier Transitions : Any Comments [7:30829] Ole, just a word of experience here, don't let this drag on too long without insisting that telco goes to the site and checks the smart jack CHASSIS. I have seen a slot or the whole chassis be the problem with this symptom many times. There is something about them that gives clear loopback tests from the 'front' (entry point from telco) of the smart jack card but they can only hardwire a loopback from the 'back' (exit point towards CSU). Of course, they will be obstinate towards this request. Larry Puckette Network Analyst CCNA,MCP,LANCP Temple Inland [EMAIL PROTECTED] 512/434-1838 -Original Message- From: Ole Drews Jensen [mailto:[EMAIL PROTECTED]] Sent: Thursday, January 03, 2002 4:52 PM To: [EMAIL PROTECTED] Subject: RE: Carrier Transitions : Any Comments [7:30829] Thanks Michael, and everyone else who have replied to my e-mail. The situation has changed, because I just saw that another ct (carrier transition) had occured, and that the PVC had been reset once since I cleared the counters, so I called the provider back and they are going to do another stress test this evening. Just for fun (after I cleared it earlier), I did a show service-module to see what the DSU had seen, and got the following: ELVIS#sh ser Module type is T1/fractional Hardware revision is 0.88, Software revision is 0.2, Image checksum is 0xED22BEC5, Protocol revision is 0.1 Receiver has no alarms. Framing is ESF, Line Code is B8ZS, Current clock source is line, Fraction has 4 timeslots (64 Kbits/sec each), Net bandwidth is 256 Kbits/sec. Last module self-test (done 02:37:10): Passed Last clearing of alarm counters 02:38:53 loss of signal:0, loss of frame :0, AIS alarm :0, Remote alarm :1, last occurred 01:18:35 Module access errors :0, Total Data (last 10 15 minute intervals): 0 Line Code Violations, 0 Path Code Violations 0 Slip Secs, 0 Fr Loss Secs, 0 Line Err Secs, 0 Degraded Mins 0 Errored Secs, 0 Bursty Err Secs, 0 Severely Err Secs, 0 Unavail Secs Data in current interval (573 seconds elapsed): 0 Line Code Violations, 0 Path Code Violations 0 Slip Secs, 0 Fr Loss Secs, 0 Line Err Secs, 0 Degraded Mins 0 Errored Secs, 0 Bursty Err Secs, 0 Severely Err Secs, 0 Unavail Secs I can see there's a remote alarm when the PVC went down the last time, which to me looks like the problem isn't my DSU nor the cable. Any comments to that? Thanks, Ole ~~~ Ole Drews Jensen Systems Network Manager CCNP, MCSE, MCP+I RWR Enterprises, Inc. [EMAIL PROTECTED] ~~~ http://www.RouterChief.com ~~~ NEED A JOB ??? http://www.oledrews.com/job ~~~ -Original Message- From: Munoz, Michael [mailto:[EMAIL PROTECTED]] Sent: Thursday, January 03, 2002 4:46 PM To: 'Ole Drews Jensen'; [EMAIL PROTECTED] Subject: RE: Carrier Transitions : Any Comments [7:30829] I have worked on the telco side and as you can imagine, this happens a bit.. At least you were working with the telco.. You don't know how many people would refuse to change anything.. Did the problem clear after telco testing or after you replaced the wire? That will tell you where the problem was.. I'm curious, how did you know the carrier transitions were within 24 hours? Had you experienced the bouncing and cleared the counters the previous day? If so, those were the only errors you received? For a T1, telco will usually run QRSS, 1's and 0's.. DDS, 2047, 1's and SP5.. More can be run of course but generally not, from my experience.. I remember I used to see a common problem with a certain 12.0x version and 2600 with WIC-1DSU-T1 (imagine trying to tell someone to change their IOS) Thanks, Mike Munoz
RE: Frame-relay [7:29747]
What it is and what it provides are two different statements altogether. So it appears confusing, but i remember studying for it i felt the same way. And remember going into the exam, they will try to trick you and reword questions exactly like the one you have. Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=29799t=29747 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
RE: Switch types for BCMSN [7:29391]
Just a quick note on the 1900s. The old 1900c switches, (size of a pizza box) and db-9 console port were menu driven. the 1924-A standard edition (software upgradeable to Enterprise edition) and enterprise catalyst switches (1924-EN), you can choose IOS from the menu and is just like a 2924xl. They are half the size of the older models, and they have an rj45 console port. (9.00.004) is the latest revision Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=29455t=29391 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Passed 640-505 Bcran [7:29353]
77 Questions, 90 minutes. Took this exam 12-14. Hardest Exam I have ever taken. I like that. Not like the mickey mouse MCSE exams where you are in and out in 15 minutes. Very obscure theory questions. This was my first CCNP exam, and I'd say the majority of the questions were isdn, DDR, x25. (40%) Know them inside and out. You will get questions from every chapter from the book, Used BCRAN book in the CCNP prep library, hands on, and boson exams. Boson exams are ok, but nothing like the real thing, except for the drop down menus. 1 down, 3 to go. Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=29353t=29353 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: Passed 640-505 Bcran [7:29353]
A couple on the 700. But nothing to worry about. It was more product questions rather than set command questins. I looked over the 700 series chapter briefly, but we dont use any at our remote sites where I work so didnt put too much emphasis. Learn more then just how to configure x25. Most of the x25 questions are obscure theory questions and they are relentless with them. Again, something we dont use at work. Cristian Piatnitchi wrote: Hi How about the ugly Cisco 700 questions ? Any questions about this subject ? Michael Williams wrote: Congrats! The BCRAN is difficult, so you should have no problems with the others (assuming you study well) Mike W. Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=29365t=29353 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
RE: DHCP SERVER ON CISCO ROUTER 2503 [7:28380]
no ip dhcp conflict logging ip dhcp excluded-address low-address [high-address] ip dhcp pool (name) network x.x.x.x /x domain-name (name) dns-server x.x.x.x netbios-name-server x.x.x.x (multiple up to 6) netbios-node-type type default-router x.x.x.x more detail at http://www.cisco.com/univercd/cc/td/doc/product/software/ios120/120newft/120t/120t1/easyip2.htm Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=28382t=28380 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
RE: AS5300 not working with Win 2 K clients,, server [7:28384]
I dont think this is as5300 related, you might want to try looking at the win2k clients setup themselves. Try this article from MS to see if that helps. http://support.microsoft.com/default.aspx?scid=kb;EN-US;Q256213 Regards James Lee Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=28385t=28384 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Damian Rizzo Eats Poo [7:27662]
Damian Rizzo have you passed your ccnp yet. Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=27662t=27662 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]