Re: callmanager and unity [7:48651]
Hi! Unity Software can install under any win2k server or it must install under cisco listed server ? ""supernet"" wrote in message [EMAIL PROTECTED]">news:[EMAIL PROTECTED]... > I wonder if I can install both callmanager and unity on 1 machine. > Anyone did this? > > Thanks. > Yoshi Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=48747&t=48651 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Upgrade Problem IOS to c2600-jk8o3s-mz.122-6a.bin [7:32577]
My bootstrap is 11.3(2)XA4 of 2612 cisco router. After I remove 8M flash to 16M flash and upgrade to 12.2-6 IOS, boot process cannot recogonize flash program occur. What is the problem! Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=32577&t=32577 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: Simline 2 [7:27456]
IS IOS 12.09 of cisco 2503 to configure Net3 protocol. If can , how to configure. ""Paul Ferguson"" wrote in message [EMAIL PROTECTED]">news:[EMAIL PROTECTED]... > Hello Pierre, > > You are correct, the Simline 2 does not support SPID's but it will work > perfectly when you select the switch type on your router to NET3 which > actually emulates the basic call control of the newer ETSI Euro ISDN > network. > > The Simline 2 supports ETSI Euro ISDN and is pre-configured for the latest > numbering plan which is 'single number'. To call port 2 from port 1 you > dial for the first bearer (B) channel and then again for the > second bearer channel. If you want to dial from port 2 to port 1 you simply > dial twice. These default numbers can be changed through the Simline > software allowing any number up to 30 digits to be entered for each bearer > channel if you would like to make it more realistic. > > Once you have changed the protocol supported on your router you may wish to > monitor the signaling which can be done via the PC host used with the > Simline 2 by clicking on trace and entering a name if you wish to record > the file or clicking cancel if you just wish to look without recording. > > I hope that this helps to get you going, please do not hesitate to call or > e-mail if you have any more questions. > > Thanks and regards, > > > Paul Ferguson > > > > -Original Message- > From: Vicky Cashell > Sent: Tuesday, November 27, 2001 2:16 PM > To: Paul Ferguson > Subject: FW: Slimline 2 > > > -Original Message- > From: Pierre-Alex J. Guanel [mailto:[EMAIL PROTECTED]] > Sent: 26 November 2001 20:07 > To: [EMAIL PROTECTED] > Cc: [EMAIL PROTECTED] > Subject: Slimline 2 > > > I am using the Slimline 2 ISDN simulator from PDS technologies. > > I cannot get the SPID to be accepted. (See below) > > > ISDN BRI0 interface > dsl 0, interface ISDN Switchtype = basic-5ess > Layer 1 Status: > ACTIVE > Layer 2 Status: > TEI = 64, Ces = 1, SAPI = 0, State = MULTIPLE_FRAME_ESTABLISHE > TEI 64, ces = 1, state = 4(await init) > spid1 configured, no LDN, spid1 sent, spid1 NOT valid > > I have not modifed the default phone numbers and configured on > Slimline > > Below are my configs for bri0 > interface BRI0 > ip address 10.0.0.1 255.255.255.0 > encapsulation ppp > no ip route-cache > no ip mroute-cache > dialer map ip 10.0.0.2 > dialer-group 1 > isdn switch-type basic-5ess > isdn spid1 > > Is there a default LDN number I have to configure? > > Pierre-Alex Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=27537&t=27456 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: Passed Lab Exam! [7:16459]
How about ATM ,VoIP equipment or catalyst 5K equipment? ""Jon Mendoza"" wrote in message [EMAIL PROTECTED]">news:[EMAIL PROTECTED]... > Hello All, > > Having passed my lab exam I am looking to sell the following equipment: > > 2511 with 16MB/16MB - 2 octal cables (total 16 async lines), 1 Ethernet > (includes Trans.), 2 Serials > 2503 with 16MB/16MB - 1 Ethernet (with Trans.), 2 Serials, 1 BRI (includes > Motorola NT1). > 4000M with 8 MBFL/32MB - 4 Serials (synchronous), 2 Token Ring port > (includes token ring cables and 2 MAUs), 2 Ethernet ports. > > I will include 7 Back-to-Back Cables (Pacific Cables) with this deal. In > addition, I will include a compaq 24 port 10MB switch along with 1 extra > NT1. > > I am asking for $3000.00 for the whole deal! Please email me at > [EMAIL PROTECTED] > > > I also have a seperate stack of 3 2502s which do not have their chassis but > stacked up and fully functioning. I have had these guys for a year now and > I haven't had the slightest problem. They are fully loaded with 16MBFL/16MB > Ram. > > If you want I could provide a picture... > > I am asking for $600.00 for all three 2502 routers. > > Best Regards to all and good luck with your quest to get that number! > > Jon Mendoza > CCIE#8030 Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=16487&t=16459 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Problem of upgrade IOS 12.09 (4500M) [7:10612]
Hi when I upgrade from Ver11.2 IOS to ver12.09 Ent. IOS, then I reload it. There is memory requirement statement occur. Is there any memory requirement for 4500 of IOS 12.09 ? Looking for answer! Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=10612&t=10612 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]