VPDN - ISDN problems [7:53931]
Hi, Enclosed ISDN CALL HISTORY of showing customers' connect time. It it disconnects within few seconds. I am 100% sure that there is no ISDN problem at either end. Sometimes the connect time ranges from 5 minutes to 30 minutes. This problem happens daily. Also enclosed the error log for then customer widia saying "remote host closed this session ". What does it mean ? Is the customer router at central location 'disconnecting' the remote location? Or is the link getting snapped due to network congestion? TIA, Sujal ISDN CALL HISTORY Call History contains all active calls, and a maximum of 100 inactive calls. Inactive call data will be retained for a maximum of 15 minutes. CallCalling Called Remote Seconds Seconds Seconds Charges TypeNumber Number NameUsedLeft Idle Units/Currency In448210936 446616319 +.f917.6023 35 In448210936 446616319 +.f917.6023 115 In448210936 446616319 +.f917.6023 68 In448210936 446616319 +.f917.6023 74 In448210936 446616319 +.f917.6023 56 SRIL_CHNA#sh vpdn history failure Table size: 20 Number of entries in table: 1 User: [EMAIL PROTECTED], MID = 54 NAS: test, IP address = xxx.xxx.xxx.xxx, CLID = 0 Gateway: Information is not applicable Log time: 1d23h, Error repeat count: 42 Failure type: The remote server closed this session Failure reason: Result 1002, Error 0 [GroupStudy.com removed an attachment of type application/ms-tnef which had a name of winmail.dat] Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=53931&t=53931 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
RE: 9/11 [7:53084]
All that I meant was that let us also remember people who died for their country. As an example - the Vietnam War, the Kuwait war, etc, for US. For other countries, it could be the Iran Iraq war, India Pak war, etc. That's all and now quit pounding me! Sujal -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of David Armstrong Sent: Wednesday, September 11, 2002 8:05 PM To: [EMAIL PROTECTED] Subject: Re: 9/11 [7:53084] Sujal, No. Today is about remembering the innocent American lives that were lost at the hands of ruthless terrorists. Those terrorists also thought they were dying for their country. We will not in any way honor them. ""Sujal G. Ajmera"" wrote in message [EMAIL PROTECTED]">news:[EMAIL PROTECTED]... > Sure. And also for all people who have given their lives for their > respective countries. > > Amen > > -Original Message- > From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of > Jake > Sent: Wednesday, September 11, 2002 5:17 PM > To: [EMAIL PROTECTED] > Subject: 9/11 [7:53084] > > > Lets take a moment to remember are fallen heros, all who have parished, and > the families they left behind. > > Thanks Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=53155&t=53084 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
RE: 9/11 [7:53084]
Sure. And also for all people who have given their lives for their respective countries. Amen -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of Jake Sent: Wednesday, September 11, 2002 5:17 PM To: [EMAIL PROTECTED] Subject: 9/11 [7:53084] Lets take a moment to remember are fallen heros, all who have parished, and the families they left behind. Thanks Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=53085&t=53084 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
RE: Motorola router with Cisco router [7:49228]
12.5 on a 3660 -Original Message- From: Antero Vasconcelos [mailto:[EMAIL PROTECTED]] Sent: Tuesday, July 23, 2002 1:42 PM To: Sujal G. Ajmera; [EMAIL PROTECTED] Subject: RE: Motorola router with Cisco router [7:49228] which is the software on the cisco that does4nt come up? CCna,CCNP CQS. Antero Vasconcelos COMPTA - Parceria e Tecnologia Engenharia de Redes e-mail [EMAIL PROTECTED] Tel. (+351) 222070940 Fax (+351) 222070935 www www.compta.pt -Original Message- From: Sujal G. Ajmera [mailto:[EMAIL PROTECTED]] Sent: sexta-feira, 19 de Julho de 2002 12:08 To: [EMAIL PROTECTED] Subject: Motorola router with Cisco router [7:49228] Hi, I have ppp as the encapsulation protocol at both ends but the line protocol doesn't come up. I interchanged the Motorola router at the other end with a Cisco router and line protocol came up. Any thoughts on this? Thanks, Sujal [GroupStudy.com removed an attachment of type application/ms-tnef which had a name of winmail.dat] Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=49426&t=49228 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Motorola router with Cisco router [7:49228]
Hi, I have ppp as the encapsulation protocol at both ends but the line protocol doesn't come up. I interchanged the Motorola router at the other end with a Cisco router and line protocol came up. Any thoughts on this? Thanks, Sujal [GroupStudy.com removed an attachment of type application/ms-tnef which had a name of winmail.dat] Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=49228&t=49228 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
RE: Searching for CCIE Lab scenarios [7:45754]
There's a good book by Todd Lammle - CCIE Expert Study Guide for Exam 350-001. Sujal -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of Jitendra Joshi Sent: Thursday, June 06, 2002 6:18 PM To: [EMAIL PROTECTED] Subject: Re: Searching for CCIE Lab scenarios [7:45754] Hi, I am aiming to do my CCIE Routing and Switching Qual exam. Can anyone guide the what books to read other then online materials. Coz I do not just want to do the qual more then that I am more intersted in developing a knolwedge base which would be on the roadmap of CCIE Rou&Switch. Thanks, Jit(CCNP). --- Thomas Larus wrote: > The Lab Scenarios from CCBootcamp cost a lot more > than $150 (and are > supposed to be very good-- I chose Ipexpert lab > scenarios mainly because > they use a topology that more closely fits my home > lab). I think you must > be looking at the price of their CCIE Written Exam > preparation material. I > just want to make sure you buy one product thinking > you are getting the > other. > > > > ""Ronald Dommelen"" wrote in message > [EMAIL PROTECTED]">news:[EMAIL PROTECTED]... > > Hi all, > > > > Probably a frequently asked question but I'm > asking it again: > > > > I'm looking for CCIE lab scenario's. I already > have some books covering > all > > the topics and issues but now I'm looking for Lab > scenarios. > > > > Can somebody also perhaps tell me if the document > from CCBOOTCAMP a good > > document is ?($150,-) > > > > > > Best regards Ronald > > > > The Netherlands [EMAIL PROTECTED] __ Do You Yahoo!? Yahoo! - Official partner of 2002 FIFA World Cup http://fifaworldcup.yahoo.com Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=45929&t=45754 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
RE: Interface Resets [7:44791]
Neither do I like to see! But any thoughts on the possible causes? Thanks, Sujal -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of Michael L. Williams Sent: Friday, May 24, 2002 2:43 AM To: [EMAIL PROTECTED] Subject: Re: Interface Resets [7:44791] Zero. Seriously tho I don't like to see many interface resets. Mike W. "Sujal G. Ajmera" wrote in message [EMAIL PROTECTED]">news:[EMAIL PROTECTED]... > Hi, > > Is there any acceptable limit for this? > > Thanks, > > Sujal > > [GroupStudy.com removed an attachment of type application/ms-tnef which had > a name of winmail.dat] Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=44933&t=44791 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Interface Resets [7:44791]
Hi, Is there any acceptable limit for this? Thanks, Sujal [GroupStudy.com removed an attachment of type application/ms-tnef which had a name of winmail.dat] Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=44791&t=44791 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
RE: E&M [7:44326]
I changed it to the new version and the dial tone doesnt get disconnected at all (like earlier) help plz! Tks! -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of Steven A. Ridder Sent: Friday, May 17, 2002 7:28 PM To: [EMAIL PROTECTED] Subject: Re: E&M [7:44326] Try 12.2.7. Anything in the mainline is more stable than a T train release. Unless you need SRST, move to mainline ""Sujal G. Ajmera"" wrote in message [EMAIL PROTECTED]">news:[EMAIL PROTECTED]... > Would anyone know which IOS is the 'ideal' one for this? > > I've tried c3660-is-mz_121-5._T7 > and > c3660-is-mz_121.9 > > Thanks, > > Sujal > > -Original Message- > From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of > Steven A. Ridder > Sent: Friday, May 17, 2002 5:21 PM > To: [EMAIL PROTECTED] > Subject: Re: E&M [7:44326] > > > IOS issue > > -- > > RFC 1149 Compliant. > Get in my head: > http://sar.dynu.com > > > ""Sujal G. Ajmera"" wrote in message > [EMAIL PROTECTED]">news:[EMAIL PROTECTED]... > > Hi, > > > > Two 1750 2V's with E&M inside can talk to each other but one 3660 with a > > 1750 2V cannot. > > > > Any thoughts on this? > > > > Thanks, > > > > > > Sujal > > > > [GroupStudy.com removed an attachment of type application/ms-tnef which > had > > a name of winmail.dat] Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=44516&t=44326 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
RE: E&M [7:44326]
Would anyone know which IOS is the 'ideal' one for this? I've tried c3660-is-mz_121-5._T7 and c3660-is-mz_121.9 Thanks, Sujal -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of Steven A. Ridder Sent: Friday, May 17, 2002 5:21 PM To: [EMAIL PROTECTED] Subject: Re: E&M [7:44326] IOS issue -- RFC 1149 Compliant. Get in my head: http://sar.dynu.com ""Sujal G. Ajmera"" wrote in message [EMAIL PROTECTED]">news:[EMAIL PROTECTED]... > Hi, > > Two 1750 2V's with E&M inside can talk to each other but one 3660 with a > 1750 2V cannot. > > Any thoughts on this? > > Thanks, > > > Sujal > > [GroupStudy.com removed an attachment of type application/ms-tnef which had > a name of winmail.dat] Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=44344&t=44326 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
E&M [7:44326]
Hi, Two 1750 2V's with E&M inside can talk to each other but one 3660 with a 1750 2V cannot. Any thoughts on this? Thanks, Sujal [GroupStudy.com removed an attachment of type application/ms-tnef which had a name of winmail.dat] Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=44326&t=44326 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
RE: Problem of upgrading IOS for a router at remote site [7:36957]
Yes, I have faced this problem. My unsolicited advice - NEVER upgrade an IOS across a WAN link. Good luck. Sujal -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]] On Behalf Of [EMAIL PROTECTED] Sent: Friday, March 01, 2002 6:43 PM To: [EMAIL PROTECTED] Subject: Problem of upgrading IOS for a router at remote site [7:36954] Hi group, I run into a big problem when upgradeing IOS for a router at remote site. I used "copy tftp: flash:" command on a Cisco 2620 router via telnet. It first erased the existing IOS from the flash and then start to copy the image from my tftp server, which is also running on my laptop. But the router will close the telnet session after certain period of idle time, and surprisingly close the tftp session as well. It ends up that the router's flash memory has no valid IOS stored! There is no technical staff on that remote site, and it is more than a thousand KMs away so I couldn't use a console cable to directly attach to it. I repeated the above several times, watched those "!" going on until the telnet session closed, and have to pray that there is no power surge happened to that router before I find a solution! Anyone faced this problem before? Please help! Tony -- __ Your favorite stores, helpful shopping tools and great gift ideas. Experience the convenience of buying online with Shop@Netscape! http://shopnow.netscape.com/ Get your own FREE, personal Netscape Mail account today at http://webmail.netscape.com/ Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=36957&t=36957 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: Testing [7:35471]
YES! - Original Message - From: Thomas To: Sent: Friday, February 15, 2002 11:33 AM Subject: Testing [7:35471] > Can anyone see me? Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=35473&t=35471 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Voice Error [7:35272]
Hi, I get this error message on my console when I think a voice call is terminated. FAILURE in act_release_timeout Any pointers on this plz? Thanks, Sujal Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=35272&t=35272 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Fw: [Re: VOIP & Vic-2fx cards [7:34768]
Pat and Rich: I had a similar problem and got it solved just today. What we did was change the IOS and that made a difference. Sujal > Richard > > I've had the very same problem some time ago, it was really annoying, can > you post the config, it'll probably jog my memory as to what was wrong > > Cheers > > Pat > - Original Message - > From: ""Richard Botham"" > Newsgroups: groupstudy.cisco > Sent: Thursday, February 07, 2002 6:13 PM > Subject: VOIP & Vic-2fx cards [7:34768] > > > > Hi All, > > > > I have 2 x Cisco 2621 routers and each have a 2port fxs voice card - > > vic-2fxs installed. > > > > When I plug my phone into port 1/0/0 of a vic-2fxs card installed in a > 2621 > > I get dial tone. > > > > When I use port 1/0/1 I do not get dial tone. > > > > Is there any reason for this and what am I doing wrong. > > > > Regards > > Richard > _ > Do You Yahoo!? > Get your free @yahoo.com address at http://mail.yahoo.com Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=35264&t=34768 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: VOIP & Vic-2fx cards [7:34768]
Any solution to this as I am also having a similar problem :-) Sujal - Original Message - From: Patrick Donlon To: Sent: Friday, February 08, 2002 4:04 PM Subject: Re: VOIP & Vic-2fx cards [7:34768] > Richard > > I've had the very same problem some time ago, it was really annoying, can > you post the config, it'll probably jog my memory as to what was wrong > > Cheers > > Pat > - Original Message - > From: ""Richard Botham"" > Newsgroups: groupstudy.cisco > Sent: Thursday, February 07, 2002 6:13 PM > Subject: VOIP & Vic-2fx cards [7:34768] > > > > Hi All, > > > > I have 2 x Cisco 2621 routers and each have a 2port fxs voice card - > > vic-2fxs installed. > > > > When I plug my phone into port 1/0/0 of a vic-2fxs card installed in a > 2621 > > I get dial tone. > > > > When I use port 1/0/1 I do not get dial tone. > > > > Is there any reason for this and what am I doing wrong. > > > > Regards > > Richard > _ > Do You Yahoo!? > Get your free @yahoo.com address at http://mail.yahoo.com Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=35072&t=34768 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: NM 2V [7:33166]
No, Eric, it doesn't reboot. In fact, I have put the NM 2V on my 3660 router also and same problem occurs! Thanks, Sujal - Original Message - From: Erick B. To: Sent: Friday, January 25, 2002 1:38 PM Subject: Re: NM 2V [7:33166] > When the problem occurs, does the router reboot > itself, output any errors on the console (exception > faults, segV, etc)? > > I'd capture all the errors if there are any, show > tech, and open a case. > > --- "Sujal G. Ajmera" > wrote: > > Eric: > > > > I have the required memory - 64mb and the cards were > > working alright for > > about 3 months or so. > > > > This problem is since 2 weeks only. > > > > Thanks, > > > > Sujal > > - Original Message - > > From: Erick B. > > To: > > Sent: Friday, January 25, 2002 12:47 PM > > Subject: Re: NM 2V [7:33166] > > > > > > > Hi, > > > > > > Plug your modules, IOS, etc into the 2600/3600 > > memory > > > calc tool and see if you have enough memory to > > support > > > the modules. > > > > > > > > > http://www.cisco.com/cgi-bin/Support/MemCalc/mem-calc.pl > > > > > > --- "Sujal G. Ajmera" > > > wrote: > > > > Hi, > > > > > > > > On a 3640 router, I have put an NM 2V with 2 VIC > > FXS > > > > cards. > > > > > > > > These voice cards give a problem when they're > > BOTH > > > > in the module in that the > > > > router freezes or the voice card doesn't > > disconnect. > > > > > > > > Independently they work beautifully. > > > > > > > > Any thoughts on this? > > > > > > > > TIA > > > > > > > > > __ > > > Do You Yahoo!? > > > Great stuff seeking new owners in Yahoo! Auctions! > > > http://auctions.yahoo.com > > [EMAIL PROTECTED] > > > > > __ > Do You Yahoo!? > Great stuff seeking new owners in Yahoo! Auctions! > http://auctions.yahoo.com Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=33176&t=33166 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: NM 2V [7:33166]
I have the required memory - 64mb and the cards were working alright for about 3 months or so. This problem is since 2 weeks only. Thanks, Sujal - Original Message - From: Erick B. To: Sent: Friday, January 25, 2002 12:47 PM Subject: Re: NM 2V [7:33166] > Hi, > > Plug your modules, IOS, etc into the 2600/3600 memory > calc tool and see if you have enough memory to support > the modules. > > http://www.cisco.com/cgi-bin/Support/MemCalc/mem-calc.pl > > --- "Sujal G. Ajmera" > wrote: > > Hi, > > > > On a 3640 router, I have put an NM 2V with 2 VIC FXS > > cards. > > > > These voice cards give a problem when they're BOTH > > in the module in that the > > router freezes or the voice card doesn't disconnect. > > > > Independently they work beautifully. > > > > Any thoughts on this? > > > > TIA > > > __ > Do You Yahoo!? > Great stuff seeking new owners in Yahoo! Auctions! > http://auctions.yahoo.com Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=33172&t=33166 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
NM 2V [7:33166]
Hi, On a 3640 router, I have put an NM 2V with 2 VIC FXS cards. These voice cards give a problem when they're BOTH in the module in that the router freezes or the voice card doesn't disconnect. Independently they work beautifully. Any thoughts on this? TIA Sujal Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=33166&t=33166 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
FXS Card [7:17816]
Hi, Can I use an FXS card on an analog EPABX? I had a customer who is using it successfully but another customer tried it out and the card blew. Any thoughts on this? TIA Sujal Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=17816&t=17816 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
ISDN TA [7:9741]
Hi, I need to install a Zyxel ISDN TA to the serial port of the 2501 router. How can I configure it do dial automatically when it senses 'interesting traffic'? Any thoughts on this? TIA, Sujal Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=9741&t=9741 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
1603 router [7:3165]
Hi, In the Cisco documentation manual, it doesn't mention that WIC-2T can be used but it does say that WIC-1T can be used. Any thoughts on this? TIA Sujal Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=3165&t=3165 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Cisco Certified Systems Instructor [7:1842]
Hi, Where can I find info on this? I've searched the entire web site of Cisco but was unsuccessful. TIA Sujal Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=1842&t=1842 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Cisco Certified Systems Instructor [7:1841]
Hi, Where can I find info on this? I've searched the entire web site of Cisco but was unsuccessful. TIA Sujal Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=1841&t=1841 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Foundation Exam
Hi, Is this exam released? (640-509) TIA Suj _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
CCNP - 640-509
Hi. Is it better to take this exam than all three 640-503/504/505? Has anyone taken it? Any input is appreciated! Thanks! Suj _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
