Re: packet loss in LAN [7:27303]
What kinda switch are using?. if it is cat OS put sh po counters mod/port. if have runts and giants than your problem maybe related to cabling. If you have a router doing inter VLAN routing debug ip to check where you losing your packets. Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=27333t=27303 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: bandwidth monitoring [7:27289]
Your best bet would be MRTG and Solarwinds. I used Solarwinds it is pretty nice tool for bandwidth monitoring. But I say MRTG is the best reliable source to for momitoring. Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=27334t=27289 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: multiple DHCP scopes in a vlan with primary an [7:27264]
It is not recommended to have multiple subnet in one VLAN. Basically you are killing the whole concept of isolating the broadcast domain. But you can not argue that it does'nt work. Your DHCP server can assign any ip from its scopes. Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=27339t=27264 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: IS-IS [7:27260]
Check this Link for IS-IS http://www.cisco.com/univercd/cc/td/doc/cisintwk/ito_doc/osi_rout.htm#xtocid125759 Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=27341t=27260 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
RE: OT - Dynamic Address - Dynamic DNS - Dynamic Tunne [7:27249]
Why don't you use PC AnyWhere or VMS. Those software will do it for you. I would say use DSL instead off ISDN. Try to get static ip address. you have more chance of getting static ip address with DSL service. Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=27343t=27249 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
RE: Starting CCNP [7:26734]
Thanks to everyone for replying back. After reading your posts it makes me feel good that I am going into right directions. Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=26935t=26734 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
RE: ACL's on a VLAN [7:26858]
I agree with mike W. You can also block fastethernet ports to talk to each other. Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=26938t=26858 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: spanning tree failure [7:26710]
Make sure you don't have speed and duplex mismatch, plus you should have trunking mode to on, not no autonegotiate. Enable backfast on all switches. It sounds like layer 1 issue, make sure all connected interfaces are working properly. Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=26725t=26710 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
RE: reverse telnet [7:26631]
Reverse Telnet: (sometimes called direct Telnet) is the initiation of a Telnet session from a computer system to one of its remote users. Usually, a Telnet session is initiated by a user who wishes to access and share resources on a remote computer system. The user must have permission and is prompted to provide a user name and password. Reverse Telnet is when the host computer initiates a Telnet session instead of accepting one. Reverse Telnet is typically used by a system administrator to configure or to troubleshoot a remote computer. Telnet: Telnet is the way you can access someone else's computer, assuming they have given you permission. (Such a computer is frequently called a host computer.) More technically, Telnet is a user command and an underlying TCP/IP protocol for accessing remote computers. On the Web, HTTP and FTP protocols allow you to request specific files from remote computers, but not to actually be logged on as a user of that computer. With Telnet, you log on as a regular user with whatever privileges you may have been granted to the specific application and data on that computer. The result of this request would be an invitation to log on with a userid and a prompt for a password. If accepted, you would be logged on like any user who used this computer every day. Telnet is most likely to be used by program developers and anyone who has a need to use specific applications or data located at a particular host computer. Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=26729t=26631 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
RE: reverse telnet [7:26631]
Reverse Telnet: (sometimes called direct Telnet) is the initiation of a Telnet session from a computer system to one of its remote users. Usually, a Telnet session is initiated by a user who wishes to access and share resources on a remote computer system. The user must have permission and is prompted to provide a user name and password. Reverse Telnet is when the host computer initiates a Telnet session instead of accepting one. Reverse Telnet is typically used by a system administrator to configure or to troubleshoot a remote computer. Telnet: Telnet is the way you can access someone else's computer, assuming they have given you permission. (Such a computer is frequently called a host computer.) More technically, Telnet is a user command and an underlying TCP/IP protocol for accessing remote computers. On the Web, HTTP and FTP protocols allow you to request specific files from remote computers, but not to actually be logged on as a user of that computer. With Telnet, you log on as a regular user with whatever privileges you may have been granted to the specific application and data on that computer. The result of this request would be an invitation to log on with a userid and a prompt for a password. If accepted, you would be logged on like any user who used this computer every day. Telnet is most likely to be used by program developers and anyone who has a need to use specific applications or data located at a particular host computer. Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=26730t=26631 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Starting CCNP [7:26734]
Hi Guys, I am new to this site but after taking the glance at the site. I think I have lot of smart people to help me thru this CCNP journey. Well I wanna know what are the best resourses out there that i can use for my CCNP. Plus if anyone of you have sample questions and practise tests that I could use to start my process, that would be very helpful. Looking forward to see your advise. Thanks. Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=26734t=26734 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
DECnet Tunneling [7:26764]
I am in the process of redesigning and Implementing entirely new Infrastructure for our client. I have some confusion about tunneling issue. Currently this client is using IS-IS as their routing protocol but in this new setup we will implement EIGRP for a routing protocol and client will still use DECNet. I know I configure tunnel 0 int on msfc with source and destination address to route only DECnet thru tunnel 0 int. I created a seperate VLAN in the LAN side with all DECnet device connect directly to that particular vlan. I will create same vlan int on msfc with no ip address. Currently they have area 51 and area 8 and to keep things simple I want use the same area numbers with required end stations with in the area. so my question is wheather this is possible if so how would DECnet vlan int on msfc would route those packets from DECnet-vlan int to tunnel 0 int?. I have seen different configuration and read lot of suff on tunneling but still have some confusions. Thanks. Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=26764t=26764 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
