Re: access list command
I'm not currently near any routers where I can test this, but my guess is it will not let any traffic through. "host" means a specific machine with the IP address of 0.0.0.0 I attended public schools so don't flame me if I'm wrong, but I think this list is denying all packets without a 0.0.0.0 source address. > > > > Hi > > > > what does the "access-list 100 permit ip host 0.0.0.0 host 0.0.0.0" > > applied to an interface do? > > > > Is it only permitting the default route going through ? > > > > Thanks in advanced > > > > Hubert **NOTE: New CCNA/CCDA List has been formed. For more information go to http://www.groupstudy.com/list/Associates.html _ UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html FAQ, list archives, and subscription info: http://www.groupstudy.com Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: CCDA logos, t-shirt, certification, card?
The shirts are gone. You get a card and a nice certificate. And our respect of course! > > So once one passes the CCDA, what does one get? t-shirt? certificate? card? > > -- > Khanh **NOTE: New CCNA/CCDA List has been formed. For more information go to http://www.groupstudy.com/list/Associates.html _ UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html FAQ, list archives, and subscription info: http://www.groupstudy.com Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: Required CCNP Exams
The answer is "it depends". 2, 3, 4 or 5 test are required, depending if you are already a CCNA and if you take the Foundation test You must have a CCNA before Cisco will give you the CCNP so that's one test right there. But you need to pass the following 4 tests to achieve CCNP BCSN = Building Cisco Scalable Networks BCMSN = Building Cisco Multilayer Switched Networks. BCRAN = Building Cisco Remote Access Networks CIT = Cisco Internetwork Troubleshooting However, you can take the "Foundation" test instead of BCSN, BCMSN and BCRAN. There's a nice graphic at: http://www.cisco.com/warp/public/10/wwtraining/certprog/lan/programs/ccnp.ht ml HTH > > > How many exams are required for the CCNP cert, and what are they? > > Thanks > > > John Abruzzese > Project Engineer > Verizon Enterprise Solutions Group > Email: [EMAIL PROTECTED] > Email: [EMAIL PROTECTED] > Ofc: 703-918-0928, Fax: 301-622-6215 > Cell Phone: 703-623-8237 > > > **NOTE: New CCNA/CCDA List has been formed. For more information go to > http://www.groupstudy.com/list/Associates.html > _ > UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html > FAQ, list archives, and subscription info: http://www.groupstudy.com > Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] > > **NOTE: New CCNA/CCDA List has been formed. For more information go to http://www.groupstudy.com/list/Associates.html _ UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html FAQ, list archives, and subscription info: http://www.groupstudy.com Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: Need Switching exam tips
There is no mention of HSRP, Earl, Saint, Sage, Samba or Phoenix on the BCMSN test. - Original Message - From: "Donald B Johnson Jr" <[EMAIL PROTECTED]> Subject: Re: Need Switching exam tips > You got to be tight on HSRP, multicasting, multilayer switching, bridging > and vlans know campus design, switch architecture, cablining and modules > have taken a back seat to more relevant info. > Know campus design too!!! which switch goes where. > Earl - deals with addresses > Saint - manages ethernet > Sage manages other > Samba - manages the bus > Pheonix - manages the backplane on cat 5 1.2 gb x 3 equals 3.6 gbits > backplane > that is all the architecture you need. > Duck > - Original Message - > From: Stephane Wantou Siantou <[EMAIL PROTECTED]> > To: <[EMAIL PROTECTED]> > Sent: Wednesday, September 20, 2000 3:16 AM > Subject: Need Switching exam tips > > > > > > Hi everybody, > > I'll take the Switching exam tomorrow. I was wondering if some of > > you could give me some tips on the major topics that the exam focuses on > > and what type of questions to expect. > > I have been trying to memorize cables and connection types for > > different types of switches but it is kind of tedious. Has any of you > > seen that type of questions on the exam? > > Thank you so much, > > Stephane > > > > **NOTE: New CCNA/CCDA List has been formed. For more information go to > > http://www.groupstudy.com/list/Associates.html > > _ > > UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html > > FAQ, list archives, and subscription info: http://www.groupstudy.com > > Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] > > **NOTE: New CCNA/CCDA List has been formed. For more information go to > http://www.groupstudy.com/list/Associates.html > _ > UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html > FAQ, list archives, and subscription info: http://www.groupstudy.com > Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] > **NOTE: New CCNA/CCDA List has been formed. For more information go to http://www.groupstudy.com/list/Associates.html _ UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html FAQ, list archives, and subscription info: http://www.groupstudy.com Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: what does this configuration mean?
It means that if your serial link goes down, the router will want to bring up the ISDN. The commands are here (frame relay using the bri0 to back up): http://www.cisco.com/univercd/cc/td/doc/product/access/acs_mod/1600/1600swcf /frmrelay.htm#xtocid563825 Watch the word wrap and this is one of those links with an anchor so scroll up to the top of the page for the full nitty gritty. A serial interface can not "become" a BRI interface. HTH > HI all > what does this configuration mean? > > Router(config)#interface S0 > Router(config-if)#backup interface bri0 > > Does it mean that if S0 as a primary link fails, then > this So interface will become bri0 interface as an > backup link? > or > it means that another physical interface (here,bri0) > will be activated while S0 is down? > > Which one is a correct interpretation? > > Thanks in adv. > > jeongwoo > > > __ > Do You Yahoo!? > Send instant messages & get email alerts with Yahoo! Messenger. > http://im.yahoo.com/ > > **NOTE: New CCNA/CCDA List has been formed. For more information go to > http://www.groupstudy.com/list/Associates.html > _ > UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html > FAQ, list archives, and subscription info: http://www.groupstudy.com > Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] > > **NOTE: New CCNA/CCDA List has been formed. For more information go to http://www.groupstudy.com/list/Associates.html _ UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html FAQ, list archives, and subscription info: http://www.groupstudy.com Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
