Re: network simulator [7:27658]
I have never seen any commands in the IOS that can simulate an BRI ISDN switch. Please can you submit an example config, cisco URL or a command which can do this? Regards Thomas EA Louie schrieb im Newsbeitrag [EMAIL PROTECTED]">news:[EMAIL PROTECTED]... Is there any router simulation software that I can configure to run in a Frame Relay and ISDN network ? cisco routers have the ability to simulate Frame Relay switches. The archives are full of examples, but www.cisco.com also has the configurations in a number of places. try searching for frame relay switch ISDN is a little different. There are a few different solutions. One solution is a device that has 2 ISDN BRI ports. This is known as an ISDN Simulator, or ISDN Emulator. These usually have S/T and U interfaces, and the cost is typically $1500, less if you shop around. Others have had success in using a PBX with ISDN interfaces. The 2600/3600 series cisco routers running 12.1 code has the ability to simulate ISDN BRI switching - note that this is a more expensive solution than the ISDN Simulator solution. see http://groups.google.com/groups?q=john+paul+morrisonhl=enrnum=8selm=0ZEk7 .131740%24B37.2967002%40news1.rdc1.bc.home.com (watch the URL wrap) Depending on where you live, it may also be economical for you to just order two ISDN lines for the time that you need to study ISDN. good luck in your studies -e- That which does not kill us only makes us stronger - Nietzsche _ Do You Yahoo!? Get your free @yahoo.com address at http://mail.yahoo.com Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=28218t=27658 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
www.ccxx-lab.com CCNA, CCNP, CCIE Lab rental [7:27438]
If your prepare for the Cisco CCNA, CCNP, CCIE Test it is very important that you have hands on experience with Cisco equipment. We provide you a Cisco hardware remote reantal service. You have access via telnet or SSH to 4 Cisco routers in our rack for 11,5 hours for only 54 USD (incl. TAX). You can train Frame Relay, Token Ring, Ethernet, RIP, IGRP, EIGRP, OSPF, http://www.ccxx-lab.com Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=27438t=27438 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: Min router model to run BGP , OSPF , rip , eigrp and igrp [7:26453]
A 17xx would be OK, but also an 25xx. Important is of course that you have an enterprise image. suaveguru schrieb im Newsbeitrag [EMAIL PROTECTED]">news:[EMAIL PROTECTED]... hi all anyone has any idea what is the minimum router model I can buy to do BGP , OSPF, RIP ,EIGRP AND IGRP WiLL A 17XX be sufficient? regards, suaveguru __ Do You Yahoo!? Find a job, post your resume. http://careers.yahoo.com Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=26453t=26453 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: Resetting password on Cat5XXX [7:24969]
You have to turn off the machine. After you turn on again in the first 30 sec. you can enter the cat via the console port without an password. schrieb im Newsbeitrag [EMAIL PROTECTED]">news:[EMAIL PROTECTED]... Greetings, Anyone know how to break into a cat5500 with tacacs configuration? Switch is not connected to the network. Thanks.Nabil Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=25222t=24969 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
www.ccxx-lab.com - new CCIE/CCNP/CCNA online Lab FREE trial [7:24522]
We support you with the needed experience to pass your certification. You can train the needed hands on in our lab environment. It is very important to have hands-on training before you go to your test center or the CCIE lab. www.ccxx-lab.com From 01-11-2001 - 15-11-2001 we offer you a FREE trial of the lab!!! Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=24522t=24522 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: www.ccxx-lab.com - new CCIE/CCNP/CCNA online Lab FREE trial [7:24534]
Because of the high demand only one user can make a one day reservation in the trial period. Thomas Reisinger schrieb im Newsbeitrag [EMAIL PROTECTED]">news:[EMAIL PROTECTED]... We support you with the needed experience to pass your certification. You can train the needed hands on in our lab environment. It is very important to have hands-on training before you go to your test center or the CCIE lab. www.ccxx-lab.com From 01-11-2001 - 15-11-2001 we offer you a FREE trial of the lab!!! Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=24534t=24534 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: VOIP problem on two differrent router [7:760]
You have to configure the same codec on both router example: dial-peer voice 2 voip codec g711ulaw rajeevbharadwaj schrieb im Newsbeitrag [EMAIL PROTECTED]">news:[EMAIL PROTECTED]... Dear Hieu, Yes it can be because of mismatch of cisco ios. Try using same version ob both the routers. It should work. I too faced the same problem. Regards Rajeev Hieu Truong wrote: Hi all, I currently use two Cisco router 2611 with IOS: 12.0(3)T3, VIC 2 ports EM. The VoIP works fine on these two one. Now I replace one of the Cisco 2611 by Cisco 3662 version 12.1(2a)XH, and restore the configuration from C2611 to C3662. All the setting for C3662 is the same as the previous C2611. However the VoIP can not work. After the dial, I got the strangely sound. Does anyone of you have experienced of this? Does it cause by different IOS? Thnks. -- Sent through GMX FreeMail - http://www.gmx.net FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] [GroupStudy.com removed an attachment of type text/x-vcard which had a name of rajeevbharadwaj.vcf] Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=20053t=760 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]