I: Private VLAN [7:25644]
-Messaggio originale- Da: Tiziano Sassatelli [mailto:[EMAIL PROTECTED]]Per conto di Tiziano Sassatelli Inviato: venerdl 9 novembre 2001 8.40 A: 'William' Oggetto: R: Private VLAN [7:25644] This is one example of configuration about Pvlan on Catalyst 4006 and Catalyst 6509: - gbeth - cat6509-1 cat6509-2 -1/11/1- || 1/2| HSRP |1/2 || |gbeth |gbeth || 1/1| |1/2 cat4006 |100Fx |100Fx |2/1 |2/2 || -- user1user2 -- Net IP:10.0.0.0/24 Cat4006: set system name CAT4006 set interface sc0 1(vlan) IP/mask (for management) set vtp domain DOMAIN set vtp mode transparent set vlan 10 pvlan-type community set vlan 20 pvlan-type community set vlan 30 pvlan-type primary set pvlan 30 10 2/1 set pvlan 30 20 2/2 set trunk 1/1 on dot1q set trunk 1/2 on dot1q Cat6509-1 set vlan 10 pvlan-type community set vlan 20 pvlan-type community set vlan 30 pvlan-type primary set pvlan 30 10 set pvlan 30 20 set pvlan mapping 30 10 15/1 (virtual port of MSFC) set pvlan mapping 30 20 15/1 (virtual port of MSFC) set trunk 1/1 on dot1q Cat6509-2: Catalyst 6509-2: set vlan 10 pvlan-type community set vlan 20 pvlan-type community set vlan 30 pvlan-type primary set pvlan 30 10 set pvlan 30 20 set pvlan mapping 30 10 15/1 (virtual port of MSFC) set pvlan mapping 30 20 15/1 (virtual port of MSFC) Catalyst 6509-1 (MSFC): interface Vlan30 ip address 10.0.0.250 255.255.255.0 no ip redirects ip local-proxy-arp ip route-cache same-interface standby priority 100 preempt standby ip 10.0.0.243 Catalyst 6509-2 (MSFC): interface Vlan30 ip address 10.0.0.251 255.255.255.0 no ip redirects ip local-proxy-arp ip route-cache same-interface standby priority 200 preempt standby ip 10.0.0.243 Regards -Messaggio originale- Da: William [mailto:[EMAIL PROTECTED]] Inviato: giovedl 8 novembre 2001 7.29 A: [EMAIL PROTECTED] Oggetto: Private VLAN [7:25644] Did anybody know about PVLAN and got the sample configuration? Thanks. William Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=25918t=25644 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: E1 back-to-back RJ45 Link [7:4958]
On Fri, May 18, 2001 at 04:56:29AM -0400, Rashid Lohiya wrote: Hi all, I am trying to setup an E1 connection back-to-back, Cisco 7200 - Cisco 2600. I wish to know which card to buy for the 2600 Router, that will give me 2MB on RJ45 Presentation. I have a card MultiChannel E1/PRI 120 OHM/RJ45 on the 7200 end, (does anyone have a part no. for this?). Do I now need a: NM-CE1U - 1-port Channelized E1/ISDN-PRI balanced network module? ^ its unbalanced or a NM-CE1B - 1-port Channelized E1/ISDN-PRI balanced network module? or is there something that gives E1 with CSU that I need, or maybe something else altogether to fit into the 2600 router. Also do I need a crossover cable or will a normal Cat5 RJ45/UTP cable do. Thanks Rashid Lohiya [EMAIL PROTECTED] 020 8509 2990 03775 362626 www.pioneer-computers.com FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] You need NM-CE1B - 1-port Channelized E1/ISDN-PRI balanced network module whith Cat5 RJ45/UTP Bye thanks. -- _ ___ _| / __| Tiziano Sassatelli - IP Network Engineer / . \__ \ DS Logics Srl - A Cable Wireless Company \___,___/ NET Via Paolo Nanni Costa 30 Bologna (Italy) Email: [EMAIL PROTECTED] http://www.cw.com/it Phone: +39-051-6583011 Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=4961t=4958 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
