Re: Reverse Telnet to 2901
At 10:35 PM 11/1/2000 -0600, Brian wrote: Put the following commands in your terminal server and never (or darn near never) have to do a clear line again: line con 0 exec-timeout 0 0 line 1 8 no exec transport input all V. I am using a 2511 to reverse telnet into my lab. Everything works fine except the Catalyst 2901. If I hook a cisco console cable from the 2901 to my pc, it works fine. If I use my 2511 to console into it, it doesn't work: r2511#s2901 Trying s2901 (192.168.1.1, 2006)... % Connection refused by remote host What has to be done to connect to the catalyst? Everything is 9600/8/n/1. Brian --- Brian Feeny, CCNP, CCDP [EMAIL PROTECTED] Network Administrator ShreveNet Inc. (ASN 11881) _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: why?
At 04:47 PM 10/22/2000 +0800, cslx wrote: I am assuming you are using a terminal server here? Try having this in your config for your terminal server: line con 0 exec-timeout 0 0 line 1 8 no exec transport input all V. I use the line to connect with the console of 2501 and the serial of the pc,but no more 1 minute(even no more than 30 seconds),the Hyperterm lost response,I have to re-run the hyperterm,why? _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
CCIE Practice lab
Where is the best place to go for a practice lab or class for CCIE prep? Any comments here? V. _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
