frame relay vpn config [7:66357]
Hi Listers, Router C has 2 sub-ifs: s0/0.1 has a PVC connected to router A, and s0/0.2 has a PVC connected to router B. I want to configure a shared-secret VPN/IPSEC tunnel between C and A/B. Ideas, sample configs or references would be appreciated. dayo __ Do you Yahoo!? Yahoo! Platinum - Watch CBS' NCAA March Madness, live on your desktop! http://platinum.yahoo.com Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=66357t=66357 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
cat6500 ethernet module question [7:62063]
Hello listers, does anyone know the technical difference between the ws-x6148-rj-45 and ws-x6348-rj-45 modules for the cat6500 switches? the price difference is very significant though the documentation on Cisco's web site doesn't show any technical difference. Rgds, dayo __ Do you Yahoo!? Yahoo! Mail Plus - Powerful. Affordable. Sign up now. http://mailplus.yahoo.com Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=62063t=62063 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
RE: HSRP - Cat4006 stuck in INIT state [7:57771]
Hey, upgrade the OS on the switch to 6.3.6 / 7.2.1 or higher and you should be fine. Check out the last section of this url: http://www.cisco.com/warp/customer/473/62.shtml dayo --- Creighton Bill-BCREIGH1 wrote: Can we see your running config for the HSRP group setup? -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]] Sent: Wednesday, November 20, 2002 9:38 AM To: [EMAIL PROTECTED] Subject: HSRP - Cat4006 stuck in INIT state [7:57771] Trying to test HSRP between 2 Cat4006s running IOS 12.1(8a)EW1. 'Sho standby brief' says that the vlan routing never gets switched over to standy router and stays in the INIT state. Rtr 1 is standby for VLAN2 Rtr 2 is active for VLAN2 perform a shutdown on interface VLAN2 on rtr 2; 'sho stand brief' gives no ip addresses for active and standby rtrs., but instead both say INIT. Any ideas? tia, Mary [EMAIL PROTECTED] __ Do you Yahoo!? Yahoo! Web Hosting - Let the expert host your site http://webhosting.yahoo.com Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=57790t=57771 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
RE: Confreg problem...help! [7:57732]
Bill, telnet won't work if the router isn't up... I think connecting via the Aux port may be of help. dayo --- Creighton Bill-BCREIGH1 wrote: I'm assuming you don't have VTY access - telnet, of course, doesn't care about console port settings... Bill Creighton CCNP Senior System Engineer Motorola iDEN CNRC Packet Data / MPS -Original Message- From: Robert Massiache [mailto:[EMAIL PROTECTED]] Sent: Tuesday, November 19, 2002 3:27 PM To: [EMAIL PROTECTED] Subject: Re: Confreg problem...help! [7:57732] Thanks for the reply. The problem is upon boot up I am getting only garbled asci characters and the screen appears to be frozen. It don't let me see anything and type anything to implement your suggestion...sorrry. I welcome if you could tell me some alternative...thanks a lot! thanks Robert M From: miken To: Robert Massiache , CC: , Subject: Re: Confreg problem...help! Date: Tue, 19 Nov 2002 00:52:49 -0700 I believe the config-register is stored in NVRAM. So in theory, if you bypass the startup config, you may default to the standard config-register settings. Haven't tried it though to know for sure. Have you tried booting into rommon(control-break sequence) and then stepping through the confreg steps? http://www.cisco.com/en/US/partner/products/sw/iosswrel/ps1831/products _comm and_summary_chapter09186a0080087baf.html#xtocid43127http://www.cisco.com/en / US/partner/products/sw/iosswrel/ps1831/products_command_summary_chapter0918 6 a0080087baf.html#xtocid43127HTH,Mike- Original Message - From: Robert Massiache To: Cc: ; Sent: Monday, November 18, 2002 7:39 PM Subject: Confreg problem...help! Hi, I got a mc3810 router and was running perfect. Sometime ago I mistakenly typed a confreg value which I do not remeber exactly but I know it was not a relevant one. I was actually practicing with the confreg entries. What happened was that after I just rebooted the router I lost the console screen. I tried with all sorts of console port values like changing the baud-rate, start stop bit etc. I found it was responding to 1200 baud speed but all I could find is some corrupted and garbled ascii characters on the Teraterm. Same is the case with hyprterm. Any helpers please... thanks _ Add photos to your e-mail with MSN 8. Get 2 months FREE*. http://join.msn.com/?page=features/featuredemail _ Protect your PC - get McAfee.com VirusScan Online http://clinic.mcafee.com/clinic/ibuy/campaign.asp?cid=3963 [EMAIL PROTECTED] __ Do you Yahoo!? Yahoo! Web Hosting - Let the expert host your site http://webhosting.yahoo.com Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=57791t=57732 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
QOS on Sub-interfaces [7:53706]
Hi listers, I want to do some form of queueing on sub-interfaces on some of my routers. Each subif maps to a frame dlci. does any one know of a feature in IOS that can help? most queueing mechanisms I've come across work only on interfaces (not subifs.) thx, dayo __ Do you Yahoo!? New DSL Internet Access from SBC Yahoo! http://sbc.yahoo.com Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=53706t=53706 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: TFTP Server [7:48763]
try the SolarWinds tftp server - that's what I use on my XP workstation and works fine. dayo --- Muhammad Usman wrote: I have a cisco TFTP Server v 1.1, It is creating some problems with my XP Machine. Is there a better TFTP Server or is there a better Version Available. Regards, Muhammad Usman Network Engineer al Alamiah Electronics Co. Network Section www.alamiah.com.sa Tel. : (+966-1) 477 0106 Fax. : (+966-2) 477 7629 Mob. : (+966-5) 301 4903 P.O. Box 5954, Riyadh 11432 Kingdom of Saudi Arabia. ~~The End-to-End Networkers~~ __ Do You Yahoo!? Yahoo! Autos - Get free new car price quotes http://autos.yahoo.com Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=48859t=48763 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
RE: SYSLOG time stamp problem [7:44949]
service timestamps log datetime msec localtime show-timezone (watch the wrap). keywords to note: localtime show-timezone dayo --- R. Benjamin Kessler wrote: I know on RedHat you have to ensure that syslogd is started with the -r flag so that it accepts syslog messages from remote systems. -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]] On Behalf Of Steven A. Ridder Sent: Friday, May 24, 2002 10:16 AM To: [EMAIL PROTECTED] Subject: Re: SYSLOG time stamp problem [7:44949] Speaking of syslog, if a syslog daemon is running on a unix machine, is that all that needs to happen for it to collect messages. I can get a Kiwi syslog program to work, but if I have a customer set up syslog on unix, nothing is in the logs, even though the router claims to have sent him messages (and all connectivity is working). -- RFC 1149 Compliant. Jeffrey Reed wrote in message [EMAIL PROTECTED]">news:[EMAIL PROTECTED]... I set up a syslog server and have a problem with the time stamp in a sys log message. When a message is sent to my syslog server (using solar winds syslog monitor) the date/time field is correct, but the time stamp with the message itself is not, its 4 hours ahead. I show calendar and clock on the 6500 MSFC and they are both set correctly. I have the system set up for EST and daylight savings, so I think the syslog facility is not factoring in those settings. How can I get the syslog message to display the correct time? Thanks!! Jeff Reed [EMAIL PROTECTED] __ Do You Yahoo!? Yahoo! - Official partner of 2002 FIFA World Cup http://fifaworldcup.yahoo.com Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=45763t=44949 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: This is strange (HSRP issue)!! [7:44230]
I had that problem sometimes back. upgrade the ios on HQ5 to 12.1, and your problem will disappear. guess it's a little bug in ios. dayo --- Michael Williams wrote: Okay... we've got a 5513 with RSM and a 6509 with Sup2 + MSFC2... they are trunked together (at layer 2). I've got HSRP configured for 7 other VLANs on the same two switches and don't have this problem with any of them except this one VLAN. I would try to explain the problem, but here's output and config snippets from the two routers to demonstrate the problem (i.e. look at the output from the 'show stand vlan 300' command on HQ5). I've also included pings between to two to demonstrate that they can indeed communicate with each other. Remember that none of the other VLANs (with virtually the exact same config except for different IPs/subnets works fine) Any input is appreciated! HQ7 = Sup2 w/MSFC2 in 6509 running Native IOS 12.1(8b)E7 - interface Vlan300 ip address 10.41.246.35 255.255.255.224 no ip redirects standby timers 5 15 standby priority 110 preempt standby ip 10.41.246.34 HQ7#show stand vlan 300 Vlan300 - Group 0 Local state is Standby, priority 110, may preempt Hellotime 5 holdtime 15 configured hellotime 5 sec holdtime 15 sec Next hello sent in 00:00:02.450 Virtual IP address is 10.41.246.34 configured Active router is 10.41.246.36 expires in 00:00:11, priority 130 Standby router is local 3 state changes, last state change 3d17h HQ7#ping 10.41.246.36 Type escape sequence to abort. Sending 5, 100-byte ICMP Echos to 10.41.246.36, timeout is 2 seconds: ! Success rate is 100 percent (5/5), round-trip min/avg/max = 1/2/4 ms HQ5 = RSM in 5513 running IOS 11.3(3a)WA4(5) - interface Vlan300 ip address 10.41.246.36 255.255.255.224 no ip redirects standby timers 5 15 standby priority 130 standby preempt standby ip 10.41.246.34 HQ5#show stand vlan 300 Vlan300 - Group 0 Local state is Active, priority 130, may preempt Hellotime 5 holdtime 15 configured hellotime 5 sec holdtime 15 sec Next hello sent in 00:00:00.572 Hot standby IP address is 10.41.246.34 configured Active router is local Standby router is unknown expired Standby virtual mac address is .0c07.ac00 HQ5#ping 10.41.246.35 Type escape sequence to abort. Sending 5, 100-byte ICMP Echos to 10.41.246.35, timeout is 2 seconds: ! Success rate is 100 percent (5/5), round-trip min/avg/max = 1/3/8 ms [EMAIL PROTECTED] __ Do You Yahoo!? LAUNCH - Your Yahoo! Music Experience http://launch.yahoo.com Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=44555t=44230 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Boson CCIE Lab book [7:41109]
Hi Listers, has anyone bought/used the Boson CCIE Detailed Skills Lab and Answer book? (price us$495.00)? Is it useful / recommended? just want to be sure it's worth the price tag. Thx, dayo __ Do You Yahoo!? Yahoo! Tax Center - online filing with TurboTax http://taxes.yahoo.com/ Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=41109t=41109 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]