ISDN problem with Dial-Peer
I have 1 as5300 with a voip dial-peer heading to my second as5300. on my second as5300 I have pri's setup and I have voice ports 0:d,1:d,2:d,3:d and dial-peer voice 1 pots destinatino-pattern 555 no-digit strip direct-inward-dialing port 0:d (problem)when I make a call from #1 as5300 to #2 as5300 the call connects, however when I change the port to 1:d,2:d, or 3:d the call flaps and NEVER connects. 1) sh isdn status shows MULTI_FRAME_ESTABLISHED for 0:d,1:d,2:d,3:d 2) controllers are A' ok 3) any call on any dial-peer will NOT connect on 1:d,2:d,3:d Any ideas thanks _ Get more from the Web. FREE MSN Explorer download : http://explorer.msn.com _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
cat 6500 problem
I have 2 Cat 6500's. I can only see mod 1, if I try to switch to any other mod then I get a Pinnacle synch error(see below). I have switched SUP's with another 6500 and I still cannot switch to another MOD. I have a GBIC blade in mod 2 and I have swapped that out with a 48port 10/100 blade, no good. I have tried different slots, either with the GBIC by itself or with the 48port, on both of the chasis, I still cannot see any other mod besides mod 1. Any ideas ?? Thanks James 2000 Jul 03 16:42:54 %SYS-3-MOD_MINORFAIL:Minor problem in module 1 Pinnacle Synch Failed. Retries: 4 WARNING: Switching bus not synchronised 2000 Jul 03 16:43:04 %SYS-5-MOD_OK:Module 1 is online Get Your Private, Free E-mail from MSN Hotmail at http://www.hotmail.com ___ UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html FAQ, list archives, and subscription info: http://www.groupstudy.com Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]