7507 RSP RAM
Hi, Is it a must the primary and secondary RSP should have the same RAM capacity? Is it ok if I install more RAM on primary RSP temporarily? Thanks Regards, Raymond _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
ATM PVC VBR
Dear all, I would like to know is it any difference between two method of configuring PVC 1. atm pvc 32 1 32 aal5snap 32000 32000 2. pvc 1/32 . . I am using method one, I have a problem is that I built a PVC between two routers (12008 and 7507) running BGP, in-between is carrier network. And the setting of carrier is VBR, I have set PVC on both routers as VBR. Once I have booted up 7507, the speed is fast and normal, but after several minutes, the speed is very slow. However, if I configure CBR - within the range of VBR's SCR, the speed is normal and fast. Is it any parameters I need to concern when I configure VBR? Thanks Regards, Raymond _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Loopback interface
Hi, When I saw some sample configurations, there is a loopback interface. What is this interface use for? Should I always configure it? Thanks Regards, mak _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Set VLAN question?
Hi, I cannot distinguish the situation I should use portvlancost or portvlanpri. Would someone can tell me? Thanks mak _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: AW: Set VLAN question?
Hi, Both commands portvlancost and portvlanpri configure different things, but it seems that the function is just the same. So I don't know when I should use portvlancost, when I should use portvlanpri. mak Udo Konstantin wrote: Hi mak, let me know what you want to do ? First you can try set spantree portcost mod_num/port_num cost - global port cost for a switch port set spantree portpri mod_num/port_num priority - global port priority for a switch port cu Udo -Ursprungliche Nachricht- Von: mak [mailto:[EMAIL PROTECTED]">mailto:[EMAIL PROTECTED]] Gesendet: Mittwoch, 14. Marz 2001 14:14 An: [EMAIL PROTECTED] Betreff: Set VLAN question? <!doctype html public "-//w3c//dtd html 4.0 transitional//en"> <html> Hi, <p>I cannot distinguish the situation I should use portvlancost or portvlanpri. Would someone can tell me? <p>Thanks <br> <p>mak</html> _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html">http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html">http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
LANE
Hi all, It seems that LANE does not have much advantage. In what situation I need to / is better to use LANE? Thanks Regards, mak _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
MCNS
Hi all, Would you post again the materials need for the MCNS, such as books or online materials please? Thanks Regards, mak _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: MCNS
Hi, And also which topics I should pay more attention? Thanks Regards, mak mak wrote: > Hi all, > > Would you post again the materials need for the MCNS, such as books or > online materials please? > > Thanks > > Regards, > mak > > _ > FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html > Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
OSPF load balancing
Hi all, I would like to know default is it OSPF already load-balancing? Is it only true that, suppose when 1 to 1 router WAN connection? How about can I configure load-balancing when 2 to 2 routers WAN connection? Thanks Regards, mak _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: OSPF load balancing
Brian wrote: > On Wed, 6 Dec 2000, mak wrote: > > > Hi all, > > > > I would like to know default is it OSPF already load-balancing? > > yes 4 equal cost paths by default. > > > Is it only true that, suppose when 1 to 1 router WAN connection? > > that sentence doesn't make any sense to me. Oh yes, I mean 1 to 1 router with 2 WAN connections > > > > How about can I configure load-balancing when 2 to 2 routers WAN > > connection? > > If the routes are learned over both links from the OSPF process, it will > use both links automatically. > > Brian > > > > > Thanks > > > > Regards, > > mak > > > > _ > > FAQ, list archives, and subscription info: >http://www.groupstudy.com/list/cisco.html > > Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] > > > > --- > Brian Feeny, CCNP+ATM, CCDP [EMAIL PROTECTED] > Network Administrator > ShreveNet Inc. (ASN 11881) > > _ > FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html > Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: OSPF load balancing
mak wrote: > Hi all, > > I would like to know default is it OSPF already load-balancing? > Is it only true that, suppose when 1 to 1 router WAN connection? 1 to 1 router with two WAN connections > > How about can I configure load-balancing when 2 to 2 routers WAN > connection? 2 to 2 routers with one WAN connection for each router. > > > Thanks > > Regards, > mak > > _ > FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html > Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Routing question
Dear all, I would like to know if I configure like this Router <-> Firewall <-> Router or route-switch Is it Firewall, such as PIX or CheckPoint do not pass routing table between routers? The better solution is using IOS FireWall? Thanks Regards, mak _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
CCIE exam
Dear all, As I check the Cisco Web site. There are two CCIE R&S Exams 1. R&S Qualification Exam (MC) 2. Lab exam Is the written exam including in lab exam? I thought there are one written exam and one lab exam. Regards, mak _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: CCIE exam
mak wrote: > Dear all, > > As I check the Cisco Web site. > There are two CCIE R&S Exams > 1. R&S Qualification Exam (MC) It seems that it is written exam. I thought it is hand-written exam rather than MC exam :) > > 2. Lab exam > > Is the written exam including in lab exam? > I thought there are one written exam and one lab exam. > > Regards, > mak > > _ > FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html > Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
traceroute question
Dear All, I would like to know, suppose when I traceroute to www.cisco.com. Each entry within my network displays very slow, once outside my network, the entry display very fast. Why this happen? Thanks Regards, mak _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Simple question
Hi, For example, ip as-path access-list 20 permit ^100$ What is the ^$ stands for? Thanks mak _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: Simple question
Thanks mak Devon Watkins wrote: > They are REGEX (Regular Expression) symbols.. used in pattern > matching. > > Specifically, > > ^ == first character > $ == end of line > > Probably not the clearest explanantion..try searching on REGEX > > On 2 Jan 2001 00:08:06 -0500, [EMAIL PROTECTED] (mak) wrote: > > >Hi, > > > >For example, ip as-path access-list 20 permit ^100$ > > > >What is the ^$ stands for? > > > >Thanks > > > >mak > > > > > > > >_ > >FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html > >Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] > > _ > FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html > Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Security Specialist
Dear all, Anyone has taken the new three exams for security specialist, any comment about these? Thanks Regards, mak _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: CCNP Security
I think the only good resources is the Documentation. Regards, mak Jon Cuthbert wrote: Does anyone know of any good books for the 4 exams now required for the Security specialisation. I know the Managing Cisco Network Security book by Cisco Press is due out. But what about the PIX and other exams. Also I wonder why they've suddenly increased the exams for this specialistation compared with the others. Thanks Jon _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html">http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
PIX failover redundancy
Hi all, I configure the two PIX with failover function. Is it once there is a link (in, out or DMZ) connected to PIX is going down, then the failover would be activated? Is it I can only configure one instance for each interface (in, out and DMZ) on one PIX? If so, why PIX 520 has six slots, if there are only three interfaces to be activated? Thanks Regards, mak _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Manual change RSP state
Hi all, I want to know how can I change the state of RSP2 in 7507. That is, change the master RSP to slave RSP, change slave RSP to master RSP. Thanks Regards, Raymond _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
resources for configuring access-list
Hi, Where can I find to let me know what ports map to a particular service? It is quite hard to know to meet the requirement, such as when the PIX works with Windows environment, need to konw NetBios ports etc. Thanks Regards, mak _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
problem on ping
Hi all, When I ping to a internal network from Internet. The time is very long, it is greater than 2500ms. I would like to know what factors make this happen, is it the routers CPU work load? or there is a routing problem? Thanks mak _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Upgrade IOS, boot image
Hi, I would like to know "copy tftp flash" is used to upgrade IOS, how about upgrading boot image Thanks Regards, mak _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: Upgrade IOS, boot image
How about cisco GSR 12000 series? mak Circusnuts wrote: > Totally depends on the router... If you have say a 4700, the boot image is > copied to a 4 Meg Flash stick... if you have a 2500, it's a physical > changeout... > > Need more information... > > Phil > > - Original Message - > From: "whatshakin" <[EMAIL PROTECTED]> > To: <[EMAIL PROTECTED]> > Sent: Monday, November 13, 2000 4:11 AM > Subject: Re: Upgrade IOS, boot image > > > The boot image is installed on the Boot ROM chips. To upgrade the image, > > you need to swap the ROMS with newer versions. > > > > - Original Message ----- > > From: Phillip Heller <[EMAIL PROTECTED]> > > Newsgroups: groupstudy.cisco > > To: mak <[EMAIL PROTECTED]> > > Cc: <[EMAIL PROTECTED]> > > Sent: Sunday, November 12, 2000 9:59 PM > > Subject: Re: Upgrade IOS, boot image > > > > > > > copy tftp bootflash > > > > > > --phil > > > > > > On Mon, 13 Nov 2000, mak wrote: > > > > > > Hi, > > > > > > I would like to know "copy tftp flash" is used to upgrade IOS, how > > about > > > upgrading boot image > > > > > > Thanks > > > > > > Regards, > > > mak > > > > > > _ > > > FAQ, list archives, and subscription info: > > http://www.groupstudy.com/list/cisco.html > > > Report misconduct and Nondisclosure violations to > [EMAIL PROTECTED] > > > > > > > > > _ > > > FAQ, list archives, and subscription info: > > http://www.groupstudy.com/list/cisco.html > > > Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] > > > > > > > _ > > FAQ, list archives, and subscription info: > http://www.groupstudy.com/list/cisco.html > > Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] > > _ > FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html > Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
OSPF databaseD [7:1530]
Dear all, Would someone can tell me is what situation the route (Type 5) can be seen in OSPF database but not in routing table? Thanks Best Regards, mak Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=1530&t=1530 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: OSPF databaseD [7:1530]
Yes, but if not this situation, then it would be strange. Also, I would like to ask one question regarding to OSPF database to clarify my concept. Suppose I have a circular connection with several routers configuring OSPF in same area. And there are three pairs A&B, C&D, E&F. And suppose there is a static route in A and B for pointing to the firewall within the same subnets as A&B, and also redistribute static subnets in OSPF in A and B. Is it correct if I just can see only one entry, suppose say advertised from A in OSPF database for all routers, but not two entries that advertised from A and B in OSPF database? Thanks Regards, mak Peter Van Oene wrote: > > The same route with a lower admin distance will cause this to happen. For > example, a connected route or a static etc. > > Peter > > *** REPLY SEPARATOR ******* > > On 4/22/2001 at 12:10 PM mak wrote: > > >Dear all, > > > >Would someone can tell me is what situation the route (Type 5) can be > >seen in OSPF database but not in routing table? > > > >Thanks > > > > > >Best Regards, > >mak > >FAQ, list archives, and subscription info: > >http://www.groupstudy.com/list/cisco.html > >Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] > FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html > Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=1534&t=1530 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
OSPF redistribution [7:2909]
Hi all, I have a question is that In the existing network all routers are running OSPF and "redistribute static subnets" are already configured. If I add one more static route in one of the routers. Am I right that there is change in OSPF database, then it would trigger to flush the routing table and also the other OSPF routers in the network? However, I always need to "clear ip route *" in some routers for quicker response. Thanks Best Regards, mak Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=2909&t=2909 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Different kind of switching [7:6064]
Hi, Would someone can tell me how can I locate the info about the difference between different kinds of switching, such as fast switching, flow switching, distributed fast switching etc. Thanks regards, mak Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=6064&t=6064 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
BGP and NAT [7:15859]
Hi, Simply say, suppose configuring BGP between Router A and B. Router A makes a neighbor reference to the connected interface of router B. I would like to know can I configure "ip nat outside" on that interface on router B? Since once I configure it, after the hold time period, the BGP connection is lost and stay in Active state. Thanks a lot Regards, mak Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=15859&t=15859 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
SFM on 6500 [7:19289]
Hi all, I would like to know anyone work with SFM on 6500 before. Any thing I need to pay attention when I play with SFM. Thanks mak Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=19289&t=19289 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
configuring bridge on router [7:19936]
Hi All, I would like to know if I configure: bridge 1 protocol ieee Is it any special meaning for the "1"? I configure the bridging between two routers like this PC R1 R2 PC I configure "bridge 1" for R1 and "bridge 2" for R2. But the PC can browse each other by NetBEUI. Is it this identifier number nothing special? or is there any special function? Thank a lot mak Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=19936&t=19936 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: Computer Based Training
If you goto the home page of http://www.armycbt.army.mil, there is a warning that the website is only for Army related personnel usage only. Please be careful, you don't want to get into trouble with the US Military. ""Lim Jit Cherng"" <[EMAIL PROTECTED]> wrote in message [EMAIL PROTECTED]">news:[EMAIL PROTECTED]... > I have found this cool CBT coursewares.. There are some great training > materials for CCNP.. > > http://www.armycbt.army.mil/Cbtweb/catalog.htm > > > anyone have other recommendations > > > cheers... > > _ > FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html > Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] > _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Is it any new question format in CCNP v2 exam?
As title Thanks Regards, Raymond **NOTE: New CCNA/CCDA List has been formed. For more information go to http://www.groupstudy.com/list/Associates.html _ UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html FAQ, list archives, and subscription info: http://www.groupstudy.com Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
About access-list
Hi, I am just a beginner. I have a question is that should I need to type any command to "enable" using ip extended access-list? It is because when I add an ip access-group for standard access-list on an interface, it works and no side-effect. But when I add an extended access-list on an interface, I even cannot ping out. Thanks Regards, Raymond **NOTE: New CCNA/CCDA List has been formed. For more information go to http://www.groupstudy.com/list/Associates.html _ UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html FAQ, list archives, and subscription info: http://www.groupstudy.com Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: About access-list
Hi, Once I apply the extended list on an interface for "IN" traffic, is it implicitly block all incoming traffic on that interface? I also want to know, for example. access-list 110 permit tcp any any neq telnet 1. ip access-group 110 in 2. ip access-group 110 out For 1, the source (any) would be internal network, destination (any) would be outside. Is it, for 2, the source would be outside network, destination would be internal network? Am I wrong with this kind of "point of view"? Thanks Raymond Raymond Mak wrote: > Hi, > > I am just a beginner. I have a question is that should I need to type > any command to "enable" using ip extended access-list? > It is because when I add an ip access-group for standard access-list on > an interface, it works and no side-effect. But when I add an extended > access-list on an interface, > I even cannot ping out. > > Thanks > > Regards, > Raymond > > **NOTE: New CCNA/CCDA List has been formed. For more information go to > http://www.groupstudy.com/list/Associates.html > _ > UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html > FAQ, list archives, and subscription info: http://www.groupstudy.com > Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] **NOTE: New CCNA/CCDA List has been formed. For more information go to http://www.groupstudy.com/list/Associates.html _ UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html FAQ, list archives, and subscription info: http://www.groupstudy.com Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Configure PVC
Hi, I would like to know how to configure PVC with CBR 20M? Is it just, for example, "atm pvc 32 1 32 aal5snap 2 2" is enough in the ATM subinterface? Thanks in advance Best Regards, Raymond Mak **NOTE: New CCNA/CCDA List has been formed. For more information go to http://www.groupstudy.com/list/Associates.html _ UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html FAQ, list archives, and subscription info: http://www.groupstudy.com Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
route table
Hi, Would you tell me how to flush the bgp routing table to make it learn again? Thanks Regards, Raymond **NOTE: New CCNA/CCDA List has been formed. For more information go to http://www.groupstudy.com/list/Associates.html _ UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html FAQ, list archives, and subscription info: http://www.groupstudy.com Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
About Switching exam.
Hi, Would you tell me is it many "product-specific" questions in this paper? Thanks Regards, Raymond **NOTE: New CCNA/CCDA List has been formed. For more information go to http://www.groupstudy.com/list/Associates.html _ UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html FAQ, list archives, and subscription info: http://www.groupstudy.com Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
BGP problem
Hi, I have local and global connection to Internet. When I trace from local site to internal network, it passes through local connection, and when I trace from global site to internal network, it can pass through global connection. But the strange thing is when I trace from internal network to local site and global site, it all passes through global connection. How can I configure to make it works when trace from internal network? Are the "distribute-list" and "route-map" configuration (not my config.) make it bad? Actually what exactly are they? Thanks Regards, Raymond **NOTE: New CCNA/CCDA List has been formed. For more information go to http://www.groupstudy.com/list/Associates.html _ UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html FAQ, list archives, and subscription info: http://www.groupstudy.com Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: BGP problem
I have solved the problem now. Regards, Raymond Mak Raymond Mak wrote: > Hi, > > I have local and global connection to Internet. > When I trace from local site to internal network, it passes through > local connection, and when I trace from global site to internal network, > it can pass through global connection. But the strange thing is when I > trace from internal network to local site and global site, it all passes > through global connection. > How can I configure to make it works when trace from internal network? > Are the "distribute-list" and "route-map" configuration (not my config.) > make it bad? Actually what exactly are they? > > Thanks > > Regards, > Raymond > > **NOTE: New CCNA/CCDA List has been formed. For more information go to > http://www.groupstudy.com/list/Associates.html > _ > UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html > FAQ, list archives, and subscription info: http://www.groupstudy.com > Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] **NOTE: New CCNA/CCDA List has been formed. For more information go to http://www.groupstudy.com/list/Associates.html _ UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html FAQ, list archives, and subscription info: http://www.groupstudy.com Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Question, Need Help
Hi, I have a 7500 series router. There are three interfaces, one is serial, FE and atm. And only ATM port is using private IP. I have one PC with ATM adapter connect to the ATM port through a ATM switch (non-cisco). I can Ping from PC to the ATM port, but I cannot ping the other two interfaces, even I have added OSPF. What is the problem? Is the IOS do not let me do it this way because of the private address? Thanks you for your help Regards, Raymond Mak _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
LANE
Hi, Is it possible to configure LANE on router, eg 7500 series, since I just see examples of LANE configuration on Catalyst 8400 etc in Cisco site? Thanks Regards, Raymond _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Solutionlabs Also Got PoizonBox! [7:3521]
Apparently only the home page seem to have been hacked. Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=3521&t=3521 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
CCIE Lab Scenarios - CCBootcamp Or Solution Lab [7:4586]
Hello All, After spending over $25K of my own money on Cisco training within the past 18 months, my budget is running tight. Please let me know if it is worth it to penny pinch and save to purchase the ccbootcamp labs ($650+shipping) or solution lab's labs ($189). Is the Solution Lab's labs sufficient enough for practice to cover the lab test? Any comments and recommendation will be much appreciated. Thanks, Kin Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=4586&t=4586 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: CCIE Lab Scenarios - CCBootcamp Or Solution Lab [7:4586]
No! $25k and I am still not ready. These are just training classes to learning the necessary Cisco requirements for the lab exam. You still have to put in practical lab hours and these labs put you a step closer in passing the exam. There are a lot of people in this group that have spent more money and have on the job experience. Unfortunately for me I only have limited on the job experience. Everybody's road to CCIE is different. For me its a long and hard road. The only way I see myself achieving CCIE is to burn the midnight oil putting in a lot rack time working on these labs. Thanks for your advice anyway. Kin ""EA Louie"" wrote in message [EMAIL PROTECTED]">news:[EMAIL PROTECTED]... > Kin, > > $25k and you still aren't ready for the exam? that's a frighteningly high > investment, but I guess the cost of the Lab exam will be a relative > drop-in-the-bucket after that. > > I haven't taken either of the labs you mention, but if you haven't worked on > ATM and Voice configurations, make sure that those are included in one or > both of those labs. > > -e- > > - Original Message - > From: "Kin Mak" > To: > Sent: Tuesday, May 15, 2001 1:05 PM > Subject: CCIE Lab Scenarios - CCBootcamp Or Solution Lab [7:4586] > > > > Hello All, > > > > After spending over $25K of my own money on Cisco training within the past > > 18 months, my budget is running tight. Please let me know if it is worth > it > > to penny pinch and save to purchase the ccbootcamp labs ($650+shipping) or > > solution lab's labs ($189). Is the Solution Lab's labs sufficient enough > for > > practice to cover the lab test? Any comments and recommendation will be > much > > appreciated. > > > > Thanks, > > > > Kin > > FAQ, list archives, and subscription info: > http://www.groupstudy.com/list/cisco.html > > Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] > FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html > Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=4627&t=4586 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
About CCNA WAN Switching
Hi, Would someone can tell what is the difficulty of the exam? And also I have a quick look on the book "Cisco WAN Quick Start", but it seems that it does not contain materials about AXIS. Where can I find more materials about AXIS? Thanks Best Regards, Raymond ___ UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html FAQ, list archives, and subscription info: http://www.groupstudy.com Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
About maintain the certification
Hi, I am just CCNA 1.0 and 2.0 certified, and would continue to fullfill CCNP. I would like to know if I need to maintain CCNP cert every 2 years, should I must need to maintain CCNA also? Thanks Raymond ___ UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html FAQ, list archives, and subscription info: http://www.groupstudy.com Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Not a Cisco-related questions
Hi, Sorry it is not a Cisco-related questions. But I really would like to know is there any newsgroup discuss FORE products? Thanks Raymond ___ UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html FAQ, list archives, and subscription info: http://www.groupstudy.com Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
