OT :Terminal Server
Hi , I got my self a 3com CS 2600 terminal server with 10 rs232 ports , but it seems I need a boot disk for it to work . Does any one know where I can get one . Thanks _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Banyan Vines
Hi , Does any one know of any software to emulate banyan vines , I want to do some test but I dont have vines server and client. _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: E&M TYPE 5
Hi , I seen this many times , works different on other models, try changing the IOS , I got E&M type 5,4 Wire working on 3662 with IOS 12.1T. You may want to try this version . ""Clare, Charles"" <[EMAIL PROTECTED]> wrote in message [EMAIL PROTECTED]">news:[EMAIL PROTECTED]... > > > I have an interesting issue with E&M type 5, 4 Wire, Immediate Start, > signalling. > > NEC 7660 PABX connect 4 E&M Ports to 3662 router with NM-2V with 2 E&M > Cards. > > E&M signalling not reliable. > > If I replace 3662 with MC3810 with 4 E&M Interfaces all works well > If I replace 3662 with 1750-4V with 2 E&M Cards all works well > If I replace 3662 with 2621 with NM-2V with 2 E&M cards performs like 3662. > > When I say not reliable router will only answer a call in E&M 50% of the > time and require E&M to be hung up for 5 Seconds before another call attempt > can be made. > > > Seen this type of response ? > > Running 12.1(5)T > > > Charles > > CCNP-Voice,CCDP,MCSE+I > > > _ > FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html > Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] > _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
OT: Compression module
Hi , I need to test out the hardware compression module for 2600 series. Any recommendation how I can do the benchmark / testing . thanks _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
DR Election
Hi , >From the OSPF Design Guide - Sam Halabi ' DR and BDR concepts are per multiaccess segment ' My question is what type of segments are considered as "multiaccess segment" ? Ethernet , FR with Point-to-Multipoint with broadcast option enabled , any others?? What does he mean by 'per multiaccess segment ' ? thanks _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: VoIP config
Rodgers , Do you have the wiring diagrams for E&M 4 wire. I have done a few installations and got the wiring right by trial and error. thanks ""Rodgers Moore"" <[EMAIL PROTECTED]> wrote in message 8uhh3t$76f$[EMAIL PROTECTED]">news:8uhh3t$76f$[EMAIL PROTECTED]... > Reply in-line. > > Rodgers Moore > > "Amit Gupta" <[EMAIL PROTECTED]> wrote in message > [EMAIL PROTECTED]">news:[EMAIL PROTECTED]... > > Hi All, > > > > Need some help in configuring VoIP > > I am testing the loopback connectivity between my > > router and EPABX by dialing a local extension number. > > > > As Soon as I dial the seizing code I get connected to > > the router. > > When I dial the destination pattern my call gets > > transferred to the router,s next port > > Right here. Do you hear PBX dial-tone? When you dial the first digit does > dial-tone go away? > > Also at this point you should do a "show voice calls", "show voice dps". > What is the state of all of the ports & dsp's? Does everything look good? > > 90% of the time I see this problem it is incomplete or incorrect PBX > programming. > 9% its that the PBX set for 2 wire and router 4 wire, or the reverse, or > incorrect wiring in a 4 wire config. (Cisco was putting out incorrect > wiring diagrams for E&M 4 wire a year ago. I assume that it's been fixed, I > reported it to TAC) > Low volume level, the PBX can't hear the DTMF digits. > PBX is made by NEC or Lucent. Both are rather picky about DTMF frequency > accuracy and volume. To test, change the codec to G.711 on the ports so > that no compression is being used. Or turn on local call compression > bypass. This way the PBX's DTMF just passes through unmolested back to > itself. > > > When I dial the local extension i do not get a > > response. > > I am using tone dialing,the Interface model is Type- 5 > > E& M > > Type of Signalling is Immediate > > > > Thanks for your clues in advance. > > > > Amit > > > > __ > > Do You Yahoo!? > > Thousands of Stores. Millions of Products. All in one Place. > > http://shopping.yahoo.com/ > > > > _ > > FAQ, list archives, and subscription info: > http://www.groupstudy.com/list/cisco.html > > Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] > > > > > _ > FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html > Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] > _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Voice Problem
I have a setup as below , HQ Site1 E&MEthernet Ethernet Frame RelayEthernet Ethernet FXO PABX26212924---7507=== 7507---2924--2621PABX Here are the configs HQ 2621 voice-port 1/0/0 operation 4-wire type 5 signal immediate ! voice-port 1/0/1 operation 4-wire type 5 signal immediate ! dial-peer voice 110 pots destination-pattern +1 port 1/0/0 ! dial-peer voice 4 voip destination-pattern +2... session target ipv4:172.18.8.57 ! interface Ethernet0/0 description connected to EthernetLAN ip address 172.18.168.181 255.255.248.0 no ip directed-broadcast ! Site1 2621 voice-port 1/0/0 ! voice-port 1/0/1 ! dial-peer voice 10 pots destination-pattern +2 port 1/0/1 ! dial-peer voice 1 voip destination-pattern +1... ip precedence 5 session target ipv4:172.18.168.181 ! ! interface Ethernet0/0 description connected to EthernetLAN ip address 172.18.8.57 255.255.248.0 no ip directed-broadcast no ip route-cache no ip mroute-cache ! >From site1 I am able to make a call to HQ and can hear the voice of the person in HQ but the person at the HQ is not able to hear my voice. >From HQ I am able to make a call to site1 , but I am unable to hear the ringing tone or the voice of the person at site1 but the person at site1 can hear my voice. Where is the problem ? at the router or the PABX ?, at site1 or HQ ? Any suggestions . Thanks alot . ___ UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html FAQ, list archives, and subscription info: http://www.groupstudy.com Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
VoIP
Hello , Has any one connected FXO to PABX and E&M on the other side . I cannot make a call from E&M to FXO but FXO to E&M works fine . Any ideas ? Thanks ___ UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html FAQ, list archives, and subscription info: http://www.groupstudy.com Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
cisco@groupstudy.com
Hi , FXO to E&M is a valid configuration according to Cisco . What I ment when I said "I did not configure anything" was I did not configure any thing on the FXO interface. "Shahir Boshra" <[EMAIL PROTECTED]> wrote in message 8jetpl$66v$[EMAIL PROTECTED]">news:8jetpl$66v$[EMAIL PROTECTED]... > First, what's the purpose of connecting an FXO to an E&M? is it something > that conventional E&M to E&M can't achieve? Or is it because one of your > PBX's doesn't support E&M? If this is the case, FXO & FXS pairs would do the > job, specially with PLAR. > I honestly don't believe FXO and E&M is a working combination or at least > never heard about it, I would be glad to learn otherwise. > One more thing, what do you mean by "did not configure anything"? Did you > configure any dial-peers? does your E&M "know" when to send traffic to the > FXO router? > Regards > Shahir > ""pinoal"" <[EMAIL PROTECTED]> wrote in message > 8je9ke$uda$[EMAIL PROTECTED]">news:8je9ke$uda$[EMAIL PROTECTED]... > > Hi, > > > > I have a setup where I am connecting a FXO to pabx at site A and E&M to > site > > B, I have this problem where I can call from FXO to E&M but unable to call > > from > > E&M to FXO. > > > > I am using E&M type 5 , 4-wire , signal immediate as for the FXO I did > not > > configure anything, I am not sure waht needs to be configured. > > > > What do you think is the problem ? > > > > > > > > thanks > > > > > > > > > > ___ > > UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html > > FAQ, list archives, and subscription info: http://www.groupstudy.com > > Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] > > --- > > > ___ > UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html > FAQ, list archives, and subscription info: http://www.groupstudy.com > Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] > --- ___ UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html FAQ, list archives, and subscription info: http://www.groupstudy.com Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: Loading IOS
Just to add a note , my flash is new so there is no IOS in it , I have to load the IOS from the rommon> . > -Original Message- > From: pinoal [SMTP:[EMAIL PROTECTED]] > Sent: Wednesday, June 28, 2000 6:29 PM > To: [EMAIL PROTECTED] > Subject: Loading IOS > > Hi , > > I have loaded IOS on 2600 series router using the tftpdnld command , > but > this > command is not available on the 3600 series . Is there a similar > command in > 3600 series router that I can use to copy IOS image from tftp > server. > > I want to avoid using xmodem transfer , its too slow . > > > > thanks > > > ___ > UPDATED Posting Guidelines: > http://www.groupstudy.com/list/guide.html > FAQ, list archives, and subscription info: http://www.groupstudy.com > Report misconduct and Nondisclosure violations to > [EMAIL PROTECTED] > > ___ > UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html > FAQ, list archives, and subscription info: http://www.groupstudy.com > Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] > --- ___ UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html FAQ, list archives, and subscription info: http://www.groupstudy.com Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
cisco@groupstudy.com
Hi, I have a setup where I am connecting a FXO to pabx at site A and E&M to site B, I have this problem where I can call from FXO to E&M but unable to call from E&M to FXO. I am using E&M type 5 , 4-wire , signal immediate as for the FXO I did not configure anything, I am not sure waht needs to be configured. What do you think is the problem ? thanks ___ UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html FAQ, list archives, and subscription info: http://www.groupstudy.com Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Loading IOS
Hi , I have loaded IOS on 2600 series router using the tftpdnld command , but this command is not available on the 3600 series . Is there a similar command in 3600 series router that I can use to copy IOS image from tftp server. I want to avoid using xmodem transfer , its too slow . thanks ___ UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html FAQ, list archives, and subscription info: http://www.groupstudy.com Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Flash Memory
Hi , Recently I had to upgrade a cisco3640 from 8 M flash to 32 M flash , I was provided with 2 x 16 M flash . I took out the 8M flash and plugged in the 2 16M flash ram . I did a xmodem transfer of the ios to the flash . When I booted the router is gave me an error . "System Bootstrap, Version 11.1(20)AA2, EARLY DEPLOYMENT RELEASE SOFTWARE (fc1) Copyright (c) 1999 by cisco Systems, Inc. C3600 processor with 131072 Kbytes of main memory Main memory is configured to 64 bit mode with parity disabled get_man_dev: Unknown device - probably NOT formatted. unknown flash device - mandev code = 0x89aa cannot read flash info getdevnum warning: device "flash" has size of zero get_man_dev: Unknown device - probably NOT formatted. unknown flash device - mandev code = 0x89aa cannot read flash info getdevnum warning: device "flash" has size of zero open: read error...requested 0x4 bytes, got 0x0 trouble reading device magic number boot: cannot open "flash:" boot: cannot determine first file name on device "flash:" I took out the new flash and plugged in the original flash with one 16M Flash and I was able to boot from the original flash memory , but I still got the error get_man_dev: Unknown device - probably NOT formatted. get_man_dev: Unknown device - probably NOT formatted. I was using ios 12.08 ip/ipx/at/dec plus, I could not find any command to format the flash . I have tried partitioning the flash and erasing the flash but still get the same error . Can any noe tell me how I can format the new flash memory ? thanks ___ UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html FAQ, list archives, and subscription info: http://www.groupstudy.com Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]