Re: 1 Mbps ATM PVC running BGP
First thing I would check is traffic-shaping parameters. Ask your ISP for _exact_ shaping specs for your PVC. If there is a mismatch on either side, one of you will drop cells. Once a single cell drops, you start re-transmitting entire packets... Then you might drop a cell from the re-transmitted packet. basically all hell breaks loose. Hope this helps, Travis - Original Message - From: "Ibrahim" [EMAIL PROTECTED] To: [EMAIL PROTECTED] Sent: Friday, March 16, 2001 5:42 AM Subject: 1 Mbps ATM PVC running BGP Hi, I've 1 Mbps ATM PVC (VBR-nrt)to other ISP and trying to run BGP on it. But the BGP is always up and down (for 2-3 minutes). Anyone have experienced with kind this problem ? Also I always can't get success when I'm doing ping using 4000 bytes datagram through this PVC although the MTU on the ATM interface is 4470 bytes. regards Ibrahim _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
1 Mbps ATM PVC running BGP
Hi, I've 1 Mbps ATM PVC (VBR-nrt)to other ISP and trying to run BGP on it. But the BGP is always up and down (for 2-3 minutes). Anyone have experienced with kind this problem ? Also I always can't get success when I'm doing ping using 4000 bytes datagram through this PVC although the MTU on the ATM interface is 4470 bytes. regards Ibrahim _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: 1 Mbps ATM PVC running BGP
RE: 1 Mbps ATM PVC running BGP It could be, I'll check about MTU. Yes, we do rate-limit on both side . the funny thing is after we = established BGP, we only receive 1 BGP routing although on the other = side sent all their BGP routing. And after 3 minutes, the BGP session is = closed by itself and then go up again for only 3 minutes. Ibam - Original Message -=20 From: Morin, Patrick=20 To: 'Ibrahim'=20 Sent: Saturday, March 17, 2001 2:24 AM Subject: RE: 1 Mbps ATM PVC running BGP For the PINGs , maybe your ISP is not using a MTU of 4470... Some use = 1500. You may want to give this a try.=20 Also, your PVC is 1 Mbps, but are you shaping it accordingly?=20 Patrick=20 -Original Message-=20 From: Ibrahim [mailto:[EMAIL PROTECTED]]=20 Sent: Friday, March 16, 2001 5:43=20 To: [EMAIL PROTECTED]=20 Subject: 1 Mbps ATM PVC running BGP=20 Hi,=20 I've 1 Mbps ATM PVC (VBR-nrt)to other ISP and trying to run BGP on it. = But=20 the BGP is always up and down (for 2-3 minutes). Anyone have = experienced=20 with kind this problem ?=20 Also I always can't get success when I'm doing ping using 4000 bytes=20 datagram through this PVC although the MTU on the ATM interface is = 4470=20 bytes.=20 regards=20 Ibrahim=20 _=20 FAQ, list archives, and subscription info: = http://www.groupstudy.com/list/cisco.html=20 Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] = _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]