Re: 2500 - Doesn't accept console input
Disable the flow control in Hyperterminal. Chuck Church wrote: All, I picked up a used 2501, but I'm having some problems. I can see it boot up and it looks ok, but it doesn't accept any keystrokes from the console port. Hyperterm settings are ok, no problems with same configuration on other 2500s. I can break into ROM monitor mode, but then cannot enter anything again at the prompt. I tried taking out both the flash and the ram, relying on the ROM IOS and the 1 Mb of system board RAM, but it made no difference. Can anyone think of anything else to try before I return it? I'm going to attempt to view it's IP address from cdp nei det, but without a password, I'm probably stuck again. Any ideas? Thanks, Chuck Church CCNP, MCNE, MCSE ___ UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html FAQ, list archives, and subscription info: http://www.groupstudy.com Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] --- ___ UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html FAQ, list archives, and subscription info: http://www.groupstudy.com Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Fixed - 2500 - Doesn't accept console input
Thanks Brad, Brian, and Darrin. I tried Hyperterm from NT, and it worked. I eventually got it to work under 98. On the port configuration, I went to advanced, and unchecked the 'Use FIFO buffers' This particular 2501 had a system board dated 1993. My other ones were '96 and '98. Must be the older ones don't like fast bursts of characters. Thanks again. Chuck Church CCNP, MCNE, MCSE Sr. Network Engineer Magnacom Technologies 140 N. Rt. 303 Valley Cottage, NY 10989 845-267-4000 x218 ___ UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html FAQ, list archives, and subscription info: http://www.groupstudy.com Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
2500 - Doesn't accept console input
All, I picked up a used 2501, but I'm having some problems. I can see it boot up and it looks ok, but it doesn't accept any keystrokes from the console port. Hyperterm settings are ok, no problems with same configuration on other 2500s. I can break into ROM monitor mode, but then cannot enter anything again at the prompt. I tried taking out both the flash and the ram, relying on the ROM IOS and the 1 Mb of system board RAM, but it made no difference. Can anyone think of anything else to try before I return it? I'm going to attempt to view it's IP address from cdp nei det, but without a password, I'm probably stuck again. Any ideas? Thanks, Chuck Church CCNP, MCNE, MCSE ___ UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html FAQ, list archives, and subscription info: http://www.groupstudy.com Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
RE: 2500 - Doesn't accept console input
Chuck, try this. In hyperterminal settings set Flow Control to None. Brian CCNP, MCSE -- From: Chuck Church[SMTP:[EMAIL PROTECTED]] Reply To: Chuck Church Sent: Thursday, July 13, 2000 17:50 To: [EMAIL PROTECTED] Subject: 2500 - Doesn't accept console input All, I picked up a used 2501, but I'm having some problems. I can see it boot up and it looks ok, but it doesn't accept any keystrokes from the console port. Hyperterm settings are ok, no problems with same configuration on other 2500s. I can break into ROM monitor mode, but then cannot enter anything again at the prompt. I tried taking out both the flash and the ram, relying on the ROM IOS and the 1 Mb of system board RAM, but it made no difference. Can anyone think of anything else to try before I return it? I'm going to attempt to view it's IP address from cdp nei det, but without a password, I'm probably stuck again. Any ideas? Thanks, Chuck Church CCNP, MCNE, MCSE ___ UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html FAQ, list archives, and subscription info: http://www.groupstudy.com Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] ___ UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html FAQ, list archives, and subscription info: http://www.groupstudy.com Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: 2500 - Doesn't accept console input
try all the different baud settings i just had a 3640 that was set to 2400 real slow and try with a copy of terraterm at the url below Hyperterm goes nuts more now than then. Oz http://www.mcseco-op.com/helpfull_links.htm ___ UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html FAQ, list archives, and subscription info: http://www.groupstudy.com Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: 2500 - Doesn't accept console input
use a computer running Windows NT. The hyperterm in Win98/95 has some bugs. -Brad ""Chuck Church"" [EMAIL PROTECTED] wrote in message 001901bfed2d$91cbb160$5a0a48a6@superdave">news:001901bfed2d$91cbb160$5a0a48a6@superdave... All, I picked up a used 2501, but I'm having some problems. I can see it boot up and it looks ok, but it doesn't accept any keystrokes from the console port. Hyperterm settings are ok, no problems with same configuration on other 2500s. I can break into ROM monitor mode, but then cannot enter anything again at the prompt. I tried taking out both the flash and the ram, relying on the ROM IOS and the 1 Mb of system board RAM, but it made no difference. Can anyone think of anything else to try before I return it? I'm going to attempt to view it's IP address from cdp nei det, but without a password, I'm probably stuck again. Any ideas? Thanks, Chuck Church CCNP, MCNE, MCSE ___ UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html FAQ, list archives, and subscription info: http://www.groupstudy.com Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] --- ___ UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html FAQ, list archives, and subscription info: http://www.groupstudy.com Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]