RE: 2950-24 giving me strange symbols [7:37724]
Hello Mike I appreciate your openion .. I need more people to give me more
comments, this is would be great to know the options
Ismail Al-shelh,
Thanks Alot
-Original Message-
From: Mike Mandulak [mailto:[EMAIL PROTECTED]]
Sent: Saturday, March 09, 2002 6:41 PM
To: [EMAIL PROTECTED]
Subject: Re: 2950-24 giving me strange symbols [7:37724]
There were some bugs with 12.0(5) with regards to hyperterm, causing the
switch to reboot was one of them. Try upgrading.
- Original Message -
From: Ismail Al-Shelh
To:
Sent: Saturday, March 09, 2002 9:12 AM
Subject: 2950-24 giving me strange symbols [7:37724]
Hello all
I have two Cat 2950-24 switches , when I connect to the first switch
through hyper terminal , something strange happening to me , that strange
thing is when I try to type any letter on the keyboard it gives me another
letter or symbols I do not know why this is happening the only thing
I
can see is when one of the fastethernet port state is up or down but its
not allowing me to write proper letters , I tried to plug the cable out
and
plug it again it gives me the following
C2950 Boot Loader (CALHOUN-HBOOT-M) Version 12.0(5.3)WC(1), MAINTENANCE
INTERIM
SOFTWARE
Compiled Mon 30-Apr-01 07:56 by devgoyal
WS-C2950-24 starting...
Base ethernet MAC Address: 00:07:ec:02:67:00
Xmodem file system is available.
Initializing Flash...
flashfs[0]: 161 files, 2 directories
flashfs[0]: 0 orphaned files, 0 orphaned directories
flashfs[0]: Total bytes: 7741440
flashfs[0]: Bytes used: 2960896
flashfs[0]: Bytes available: 4780544
flashfs[0]: flashfs fsck took 6 seconds.
...done initializing flash.
Boot Sector Filesystem (bs:) installed, fsid: 3
Parameter Block Filesystem (pb:) installed, fsid: 4
Loading
flash:c2950-c3h2s-mz.120-5.3.WC.1.bin...##
#
File flash:c2950-c3h2s-mz.120-5.3.WC.1.bin uncompressed and installed,
entry p
oint: 0x8001
executing...
Restricted Rights Legend
Use, duplication, or disclosure by the Government is
subject to restrictions as set forth in subparagraph
(c) of the Commercial Computer Software - Restricted
Rights clause at FAR sec. 52.227-19 and subparagraph
(c) (1) (ii) of the Rights in Technical Data and Computer
Software clause at DFARS sec. 252.227-7013.
cisco Systems, Inc.
170 West Tasman Drive
San Jose, California 95134-1706
Cisco Internetwork Operating System Software
IOS (tm) C2950 Software (C2950-C3H2S-M), Version 12.0(5.3)WC(1),
MAINTENANCE
INT
ERIM SOFTWARE
Copyright (c) 1986-2001 by cisco Systems, Inc.
Compiled Mon 30-Apr-01 07:56 by devgoyal
Image text-base: 0x8001, data-base: 0x8031A000
Initializing flashfs...
flashfs[1]: 161 files, 2 directories
flashfs[1]: 0 orphaned files, 0 orphaned directories
flashfs[1]: Total bytes: 7741440
flashfs[1]: Bytes used: 2960896
flashfs[1]: Bytes available: 4780544
flashfs[1]: flashfs fsck took 6 seconds.
flashfs[1]: Initialization complete.
Done initializing flashfs.
C2950 POST: System Board Test : Passed
C2950 POST: Ethernet Controller Test : Passed
C2950 POST: MII TEST : Passed
cisco WS-C2950-24 (RC32300) processor (revision B0) with 22260K bytes of
memory.
Processor board ID FAB0544P2EE
Last reset from system-reset
Processor is running Enterprise Edition Software
Cluster command switch capable
Cluster member switch capable
24 FastEthernet/IEEE 802.3 interface(s)
32K bytes of flash-simulated non-volatile configuration memory.
Base ethernet MAC Address: 00:07:EC:02:67:00
Motherboard assembly number: 73-5781-08
Motherboard serial number: FAB0544789W
Model revision number: B0
Model number: WS-C2950-24
System serial number: FAB0544P2EE
C2950 INIT: Complete
00:00:17: %SYS-5-RESTART: System restarted --
Cisco Internetwork Operating System Software
IOS (tm) C2950 Software (C2950-C3H2S-M), Version 12.0(5.3)WC(1),
MAINTENANCE
INT
ERIM SOFTWARE
Copyright (c) 1986-2001 by cisco Systems, Inc.
Compiled Mon 30-Apr-01 07:56 by devgoyal
--- System Configuration Dialog ---
At any point you may enter a question mark '?' for help.
Use ctrl-c to abort configuration dialog at any prompt.
Default settings are in square brackets '[]'.
Continue with configuration dialog? [yes/no]: oo4[j}~}{|u
As you see I was trying to say NO but this No came to be oo4[j}~}{|u,
please somebody tell me the secret.
Note: I do not have any problem with the second switch I can easily login
to
the user exec mode and configure it.
Ismail Al-shelh.
[GroupStudy.com removed an attachment of type application/ms-tnef]
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7i=37778t=37724
--
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct
Re: 2950-24 giving me strange symbols [7:37724]
Well it's not really an opinion, it's a fact. We could readily reproduce the
problem. Cisco confirmed that there was a problem and told us to upgrade,
after we did the issue went away.
- Original Message -
From: Ismail Al-Shelh
To:
Sent: Sunday, March 10, 2002 7:25 AM
Subject: RE: 2950-24 giving me strange symbols [7:37724]
Hello Mike I appreciate your openion .. I need more people to give me more
comments, this is would be great to know the options
Ismail Al-shelh,
Thanks Alot
-Original Message-
From: Mike Mandulak [mailto:[EMAIL PROTECTED]]
Sent: Saturday, March 09, 2002 6:41 PM
To: [EMAIL PROTECTED]
Subject: Re: 2950-24 giving me strange symbols [7:37724]
There were some bugs with 12.0(5) with regards to hyperterm, causing the
switch to reboot was one of them. Try upgrading.
- Original Message -
From: Ismail Al-Shelh
To:
Sent: Saturday, March 09, 2002 9:12 AM
Subject: 2950-24 giving me strange symbols [7:37724]
Hello all
I have two Cat 2950-24 switches , when I connect to the first switch
through hyper terminal , something strange happening to me , that
strange
thing is when I try to type any letter on the keyboard it gives me
another
letter or symbols I do not know why this is happening the only
thing
I
can see is when one of the fastethernet port state is up or down but
its
not allowing me to write proper letters , I tried to plug the cable out
and
plug it again it gives me the following
C2950 Boot Loader (CALHOUN-HBOOT-M) Version 12.0(5.3)WC(1), MAINTENANCE
INTERIM
SOFTWARE
Compiled Mon 30-Apr-01 07:56 by devgoyal
WS-C2950-24 starting...
Base ethernet MAC Address: 00:07:ec:02:67:00
Xmodem file system is available.
Initializing Flash...
flashfs[0]: 161 files, 2 directories
flashfs[0]: 0 orphaned files, 0 orphaned directories
flashfs[0]: Total bytes: 7741440
flashfs[0]: Bytes used: 2960896
flashfs[0]: Bytes available: 4780544
flashfs[0]: flashfs fsck took 6 seconds.
...done initializing flash.
Boot Sector Filesystem (bs:) installed, fsid: 3
Parameter Block Filesystem (pb:) installed, fsid: 4
Loading
flash:c2950-c3h2s-mz.120-5.3.WC.1.bin...##
#
File flash:c2950-c3h2s-mz.120-5.3.WC.1.bin uncompressed and installed,
entry p
oint: 0x8001
executing...
Restricted Rights Legend
Use, duplication, or disclosure by the Government is
subject to restrictions as set forth in subparagraph
(c) of the Commercial Computer Software - Restricted
Rights clause at FAR sec. 52.227-19 and subparagraph
(c) (1) (ii) of the Rights in Technical Data and Computer
Software clause at DFARS sec. 252.227-7013.
cisco Systems, Inc.
170 West Tasman Drive
San Jose, California 95134-1706
Cisco Internetwork Operating System Software
IOS (tm) C2950 Software (C2950-C3H2S-M), Version 12.0(5.3)WC(1),
MAINTENANCE
INT
ERIM SOFTWARE
Copyright (c) 1986-2001 by cisco Systems, Inc.
Compiled Mon 30-Apr-01 07:56 by devgoyal
Image text-base: 0x8001, data-base: 0x8031A000
Initializing flashfs...
flashfs[1]: 161 files, 2 directories
flashfs[1]: 0 orphaned files, 0 orphaned directories
flashfs[1]: Total bytes: 7741440
flashfs[1]: Bytes used: 2960896
flashfs[1]: Bytes available: 4780544
flashfs[1]: flashfs fsck took 6 seconds.
flashfs[1]: Initialization complete.
Done initializing flashfs.
C2950 POST: System Board Test : Passed
C2950 POST: Ethernet Controller Test : Passed
C2950 POST: MII TEST : Passed
cisco WS-C2950-24 (RC32300) processor (revision B0) with 22260K bytes of
memory.
Processor board ID FAB0544P2EE
Last reset from system-reset
Processor is running Enterprise Edition Software
Cluster command switch capable
Cluster member switch capable
24 FastEthernet/IEEE 802.3 interface(s)
32K bytes of flash-simulated non-volatile configuration memory.
Base ethernet MAC Address: 00:07:EC:02:67:00
Motherboard assembly number: 73-5781-08
Motherboard serial number: FAB0544789W
Model revision number: B0
Model number: WS-C2950-24
System serial number: FAB0544P2EE
C2950 INIT: Complete
00:00:17: %SYS-5-RESTART: System restarted --
Cisco Internetwork Operating System Software
IOS (tm) C2950 Software (C2950-C3H2S-M), Version 12.0(5.3)WC(1),
MAINTENANCE
INT
ERIM SOFTWARE
Copyright (c) 1986-2001 by cisco Systems, Inc.
Compiled Mon 30-Apr-01 07:56 by devgoyal
--- System Configuration Dialog ---
At any point you may enter a question mark '?' for help.
Use ctrl-c to abort configuration dialog at any prompt.
Default settings are in square brackets '[]'.
Continue with configuration dialog? [yes/no]: oo4[j}~}{|u
As you see I was trying to say NO but this No came to be oo4[j}~}{|u
,
please
RE: 2950-24 giving me strange symbols [7:37724]
Thanks Mike , please do not miss understand me by saying openion , I will upgrade the IOS and I will give you feed back , thanks again. :) -Original Message- From: Mike Mandulak [mailto:[EMAIL PROTECTED]] Sent: Sunday, March 10, 2002 10:47 PM To: [EMAIL PROTECTED] Subject: Re: 2950-24 giving me strange symbols [7:37724] Well it's not really an opinion, it's a fact. We could readily reproduce the problem. Cisco confirmed that there was a problem and told us to upgrade, after we did the issue went away. - Original Message - From: Ismail Al-Shelh To: Sent: Sunday, March 10, 2002 7:25 AM Subject: RE: 2950-24 giving me strange symbols [7:37724] Hello Mike I appreciate your openion .. I need more people to give me more comments, this is would be great to know the options Ismail Al-shelh, Thanks Alot -Original Message- From: Mike Mandulak [mailto:[EMAIL PROTECTED]] Sent: Saturday, March 09, 2002 6:41 PM To: [EMAIL PROTECTED] Subject: Re: 2950-24 giving me strange symbols [7:37724] There were some bugs with 12.0(5) with regards to hyperterm, causing the switch to reboot was one of them. Try upgrading. - Original Message - From: Ismail Al-Shelh To: Sent: Saturday, March 09, 2002 9:12 AM Subject: 2950-24 giving me strange symbols [7:37724] Hello all I have two Cat 2950-24 switches , when I connect to the first switch through hyper terminal , something strange happening to me , that strange thing is when I try to type any letter on the keyboard it gives me another letter or symbols I do not know why this is happening the only thing I can see is when one of the fastethernet port state is up or down but its not allowing me to write proper letters , I tried to plug the cable out and plug it again it gives me the following C2950 Boot Loader (CALHOUN-HBOOT-M) Version 12.0(5.3)WC(1), MAINTENANCE INTERIM SOFTWARE Compiled Mon 30-Apr-01 07:56 by devgoyal WS-C2950-24 starting... Base ethernet MAC Address: 00:07:ec:02:67:00 Xmodem file system is available. Initializing Flash... flashfs[0]: 161 files, 2 directories flashfs[0]: 0 orphaned files, 0 orphaned directories flashfs[0]: Total bytes: 7741440 flashfs[0]: Bytes used: 2960896 flashfs[0]: Bytes available: 4780544 flashfs[0]: flashfs fsck took 6 seconds. ...done initializing flash. Boot Sector Filesystem (bs:) installed, fsid: 3 Parameter Block Filesystem (pb:) installed, fsid: 4 Loading flash:c2950-c3h2s-mz.120-5.3.WC.1.bin...## # File flash:c2950-c3h2s-mz.120-5.3.WC.1.bin uncompressed and installed, entry p oint: 0x8001 executing... Restricted Rights Legend Use, duplication, or disclosure by the Government is subject to restrictions as set forth in subparagraph (c) of the Commercial Computer Software - Restricted Rights clause at FAR sec. 52.227-19 and subparagraph (c) (1) (ii) of the Rights in Technical Data and Computer Software clause at DFARS sec. 252.227-7013. cisco Systems, Inc. 170 West Tasman Drive San Jose, California 95134-1706 Cisco Internetwork Operating System Software IOS (tm) C2950 Software (C2950-C3H2S-M), Version 12.0(5.3)WC(1), MAINTENANCE INT ERIM SOFTWARE Copyright (c) 1986-2001 by cisco Systems, Inc. Compiled Mon 30-Apr-01 07:56 by devgoyal Image text-base: 0x8001, data-base: 0x8031A000 Initializing flashfs... flashfs[1]: 161 files, 2 directories flashfs[1]: 0 orphaned files, 0 orphaned directories flashfs[1]: Total bytes: 7741440 flashfs[1]: Bytes used: 2960896 flashfs[1]: Bytes available: 4780544 flashfs[1]: flashfs fsck took 6 seconds. flashfs[1]: Initialization complete. Done initializing flashfs. C2950 POST: System Board Test : Passed C2950 POST: Ethernet Controller Test : Passed C2950 POST: MII TEST : Passed cisco WS-C2950-24 (RC32300) processor (revision B0) with 22260K bytes of memory. Processor board ID FAB0544P2EE Last reset from system-reset Processor is running Enterprise Edition Software Cluster command switch capable Cluster member switch capable 24 FastEthernet/IEEE 802.3 interface(s) 32K bytes of flash-simulated non-volatile configuration memory. Base ethernet MAC Address: 00:07:EC:02:67:00 Motherboard assembly number: 73-5781-08 Motherboard serial number: FAB0544789W Model revision number: B0 Model number: WS-C2950-24 System serial number: FAB0544P2EE C2950 INIT: Complete 00:00:17: %SYS-5-RESTART: System restarted -- Cisco Internetwork Operating System Software IOS (tm) C2950 Software (C2950-C3H2S-M), Version 12.0(5.3)WC(1), MAINTENANCE INT ERIM SOFTWARE Copyright (c) 1986-2001 by cisco Systems, Inc. Compiled Mon 30-Apr-01 07:56 by devgoyal --- System
2950-24 giving me strange symbols [7:37724]
Hello all
I have two Cat 2950-24 switches , when I connect to the first switch
through hyper terminal , something strange happening to me , that strange
thing is when I try to type any letter on the keyboard it gives me another
letter or symbols I do not know why this is happening the only thing I
can see is when one of the fastethernet port state is up or down but its
not allowing me to write proper letters , I tried to plug the cable out and
plug it again it gives me the following
C2950 Boot Loader (CALHOUN-HBOOT-M) Version 12.0(5.3)WC(1), MAINTENANCE
INTERIM
SOFTWARE
Compiled Mon 30-Apr-01 07:56 by devgoyal
WS-C2950-24 starting...
Base ethernet MAC Address: 00:07:ec:02:67:00
Xmodem file system is available.
Initializing Flash...
flashfs[0]: 161 files, 2 directories
flashfs[0]: 0 orphaned files, 0 orphaned directories
flashfs[0]: Total bytes: 7741440
flashfs[0]: Bytes used: 2960896
flashfs[0]: Bytes available: 4780544
flashfs[0]: flashfs fsck took 6 seconds.
...done initializing flash.
Boot Sector Filesystem (bs:) installed, fsid: 3
Parameter Block Filesystem (pb:) installed, fsid: 4
Loading
flash:c2950-c3h2s-mz.120-5.3.WC.1.bin...##
#
File flash:c2950-c3h2s-mz.120-5.3.WC.1.bin uncompressed and installed,
entry p
oint: 0x8001
executing...
Restricted Rights Legend
Use, duplication, or disclosure by the Government is
subject to restrictions as set forth in subparagraph
(c) of the Commercial Computer Software - Restricted
Rights clause at FAR sec. 52.227-19 and subparagraph
(c) (1) (ii) of the Rights in Technical Data and Computer
Software clause at DFARS sec. 252.227-7013.
cisco Systems, Inc.
170 West Tasman Drive
San Jose, California 95134-1706
Cisco Internetwork Operating System Software
IOS (tm) C2950 Software (C2950-C3H2S-M), Version 12.0(5.3)WC(1), MAINTENANCE
INT
ERIM SOFTWARE
Copyright (c) 1986-2001 by cisco Systems, Inc.
Compiled Mon 30-Apr-01 07:56 by devgoyal
Image text-base: 0x8001, data-base: 0x8031A000
Initializing flashfs...
flashfs[1]: 161 files, 2 directories
flashfs[1]: 0 orphaned files, 0 orphaned directories
flashfs[1]: Total bytes: 7741440
flashfs[1]: Bytes used: 2960896
flashfs[1]: Bytes available: 4780544
flashfs[1]: flashfs fsck took 6 seconds.
flashfs[1]: Initialization complete.
Done initializing flashfs.
C2950 POST: System Board Test : Passed
C2950 POST: Ethernet Controller Test : Passed
C2950 POST: MII TEST : Passed
cisco WS-C2950-24 (RC32300) processor (revision B0) with 22260K bytes of
memory.
Processor board ID FAB0544P2EE
Last reset from system-reset
Processor is running Enterprise Edition Software
Cluster command switch capable
Cluster member switch capable
24 FastEthernet/IEEE 802.3 interface(s)
32K bytes of flash-simulated non-volatile configuration memory.
Base ethernet MAC Address: 00:07:EC:02:67:00
Motherboard assembly number: 73-5781-08
Motherboard serial number: FAB0544789W
Model revision number: B0
Model number: WS-C2950-24
System serial number: FAB0544P2EE
C2950 INIT: Complete
00:00:17: %SYS-5-RESTART: System restarted --
Cisco Internetwork Operating System Software
IOS (tm) C2950 Software (C2950-C3H2S-M), Version 12.0(5.3)WC(1), MAINTENANCE
INT
ERIM SOFTWARE
Copyright (c) 1986-2001 by cisco Systems, Inc.
Compiled Mon 30-Apr-01 07:56 by devgoyal
--- System Configuration Dialog ---
At any point you may enter a question mark '?' for help.
Use ctrl-c to abort configuration dialog at any prompt.
Default settings are in square brackets '[]'.
Continue with configuration dialog? [yes/no]: oo4[j}~}{|u
As you see I was trying to say NO but this No came to be oo4[j}~}{|u,
please somebody tell me the secret.
Note: I do not have any problem with the second switch I can easily login to
the user exec mode and configure it.
Ismail Al-shelh.
[GroupStudy.com removed an attachment of type application/ms-tnef]
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7i=37724t=37724
--
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: 2950-24 giving me strange symbols [7:37724]
There were some bugs with 12.0(5) with regards to hyperterm, causing the
switch to reboot was one of them. Try upgrading.
- Original Message -
From: Ismail Al-Shelh
To:
Sent: Saturday, March 09, 2002 9:12 AM
Subject: 2950-24 giving me strange symbols [7:37724]
Hello all
I have two Cat 2950-24 switches , when I connect to the first switch
through hyper terminal , something strange happening to me , that strange
thing is when I try to type any letter on the keyboard it gives me another
letter or symbols I do not know why this is happening the only thing
I
can see is when one of the fastethernet port state is up or down but its
not allowing me to write proper letters , I tried to plug the cable out
and
plug it again it gives me the following
C2950 Boot Loader (CALHOUN-HBOOT-M) Version 12.0(5.3)WC(1), MAINTENANCE
INTERIM
SOFTWARE
Compiled Mon 30-Apr-01 07:56 by devgoyal
WS-C2950-24 starting...
Base ethernet MAC Address: 00:07:ec:02:67:00
Xmodem file system is available.
Initializing Flash...
flashfs[0]: 161 files, 2 directories
flashfs[0]: 0 orphaned files, 0 orphaned directories
flashfs[0]: Total bytes: 7741440
flashfs[0]: Bytes used: 2960896
flashfs[0]: Bytes available: 4780544
flashfs[0]: flashfs fsck took 6 seconds.
...done initializing flash.
Boot Sector Filesystem (bs:) installed, fsid: 3
Parameter Block Filesystem (pb:) installed, fsid: 4
Loading
flash:c2950-c3h2s-mz.120-5.3.WC.1.bin...##
#
File flash:c2950-c3h2s-mz.120-5.3.WC.1.bin uncompressed and installed,
entry p
oint: 0x8001
executing...
Restricted Rights Legend
Use, duplication, or disclosure by the Government is
subject to restrictions as set forth in subparagraph
(c) of the Commercial Computer Software - Restricted
Rights clause at FAR sec. 52.227-19 and subparagraph
(c) (1) (ii) of the Rights in Technical Data and Computer
Software clause at DFARS sec. 252.227-7013.
cisco Systems, Inc.
170 West Tasman Drive
San Jose, California 95134-1706
Cisco Internetwork Operating System Software
IOS (tm) C2950 Software (C2950-C3H2S-M), Version 12.0(5.3)WC(1),
MAINTENANCE
INT
ERIM SOFTWARE
Copyright (c) 1986-2001 by cisco Systems, Inc.
Compiled Mon 30-Apr-01 07:56 by devgoyal
Image text-base: 0x8001, data-base: 0x8031A000
Initializing flashfs...
flashfs[1]: 161 files, 2 directories
flashfs[1]: 0 orphaned files, 0 orphaned directories
flashfs[1]: Total bytes: 7741440
flashfs[1]: Bytes used: 2960896
flashfs[1]: Bytes available: 4780544
flashfs[1]: flashfs fsck took 6 seconds.
flashfs[1]: Initialization complete.
Done initializing flashfs.
C2950 POST: System Board Test : Passed
C2950 POST: Ethernet Controller Test : Passed
C2950 POST: MII TEST : Passed
cisco WS-C2950-24 (RC32300) processor (revision B0) with 22260K bytes of
memory.
Processor board ID FAB0544P2EE
Last reset from system-reset
Processor is running Enterprise Edition Software
Cluster command switch capable
Cluster member switch capable
24 FastEthernet/IEEE 802.3 interface(s)
32K bytes of flash-simulated non-volatile configuration memory.
Base ethernet MAC Address: 00:07:EC:02:67:00
Motherboard assembly number: 73-5781-08
Motherboard serial number: FAB0544789W
Model revision number: B0
Model number: WS-C2950-24
System serial number: FAB0544P2EE
C2950 INIT: Complete
00:00:17: %SYS-5-RESTART: System restarted --
Cisco Internetwork Operating System Software
IOS (tm) C2950 Software (C2950-C3H2S-M), Version 12.0(5.3)WC(1),
MAINTENANCE
INT
ERIM SOFTWARE
Copyright (c) 1986-2001 by cisco Systems, Inc.
Compiled Mon 30-Apr-01 07:56 by devgoyal
--- System Configuration Dialog ---
At any point you may enter a question mark '?' for help.
Use ctrl-c to abort configuration dialog at any prompt.
Default settings are in square brackets '[]'.
Continue with configuration dialog? [yes/no]: oo4[j}~}{|u
As you see I was trying to say NO but this No came to be oo4[j}~}{|u,
please somebody tell me the secret.
Note: I do not have any problem with the second switch I can easily login
to
the user exec mode and configure it.
Ismail Al-shelh.
[GroupStudy.com removed an attachment of type application/ms-tnef]
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7i=37725t=37724
--
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
