I believe the interfaces on the 2600/3600 series are numbered from right to
left but only slots with modules in them are counted. So, if you have a WIC
in the rightmost slot, it is--in your example--S2/0. If you then add the
other WIC, that one is S2/1.
If you leave the rightmost slot empty and put a WIC in the left slot, that
is S2/0.
They are numbered from right to left, and bottom to top, if applicable.
HTH,
John the Cheerful (no longer John the Grumpy) g
Further to my post regarding 2600's a few days ago.
I received an e-mail from Rick Thompson (Thanks) as below:
I have run across the same thing with the 3600
routers. It counts the first serial card as 0, no
matter if it is in slot 0 or 1.
Rick Thompson
so I decided to drag a 3600 out and try a few things.
Working with an NM1E2W:
Inserted a WIC1T into slot w1 - This becomes S2/0 (Strange but agreeing
with
previous findings).
Configured S2/0 with IP address and WR MEM.
Powered down and inserted another WIC1T into slot w0.
The new WIC1T now becomes S2/0.
With both interfaces configured I powered down and removed w0. The card
in
w1 becomes S2/0 again.
Is this a standard fact for all modular routers that the first card
inserted
will become 0, no matter which slot it's in, or is this platform/IOS
specific?
Cheers,
Gareth
_
FAQ, list archives, and subscription info:
http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
___
Send a cool gift with your E-Card
http://www.bluemountain.com/giftcenter/
_
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
