3660 RAS PROBLEMS [7:29521]

2001-12-18 Thread Simon Watson

Hi Guys I am setting up a Cisco 3660 with remote dialling access for ISDN
 PSTN users(30 Digital Modem Module  Pri Module installed), everything
seems ok, however when a ISDN User dials in to the 3660 after approx 160-
180 seconds the user gets kicked out of the 3660(The user is typing at
the time so there was activity). I have whipped up the idle timeout to 3
hours but the same thing happens.Below is a copy of part of the config,
Is there anything I am ommitting please let me know. Thanks Simon 
encapsulation
ppp
 timeout absolute 3 0
 dialer rotary-group 0
 isdn switch-type primary-net5
 isdn incoming-voice modem
 peer default ip address pool dialin_pool
 ppp authentication ms-chap
!
interface Group-Async1
 ip unnumbered Loopback0
 encapsulation ppp
 dialer in-band
 dialer-group 1
 async dynamic routing
 async mode interactive
 peer default ip address pool dialin_pool
 ppp authentication ms-chap dial_in
 group-range 33 62
!
interface Dialer0
 ip unnumbered Loopback0
 encapsulation ppp
 dialer in-band
 dialer idle-timeout 10800
 dialer-group 1
 peer default ip address pool dialin_pool
 ppp authentication ms-chap dial_in
!
interface Dialer1
 ip unnumbered Loopback1



Join the worlds largest e-mail service with MSN Hotmail. Click Here




Message Posted at:
http://www.groupstudy.com/form/read.php?f=7i=29521t=29521
--
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]



Re: 3660 RAS PROBLEMS [7:29521]

2001-12-18 Thread MADMAN

you have defined an absolute timeout for 3 min...

  Dave

Simon Watson wrote:
 
 Hi Guys I am setting up a Cisco 3660 with remote dialling access for ISDN
  PSTN users(30 Digital Modem Module  Pri Module installed), everything
 seems ok, however when a ISDN User dials in to the 3660 after approx 160-
 180 seconds the user gets kicked out of the 3660(The user is typing at
 the time so there was activity). I have whipped up the idle timeout to 3
 hours but the same thing happens.Below is a copy of part of the config,
 Is there anything I am ommitting please let me know. Thanks Simon
 encapsulation
 ppp
  timeout absolute 3 0   dialer rotary-group 0
  isdn switch-type primary-net5
  isdn incoming-voice modem
  peer default ip address pool dialin_pool
  ppp authentication ms-chap
 !
 interface Group-Async1
  ip unnumbered Loopback0
  encapsulation ppp
  dialer in-band
  dialer-group 1
  async dynamic routing
  async mode interactive
  peer default ip address pool dialin_pool
  ppp authentication ms-chap dial_in
  group-range 33 62
 !
 interface Dialer0
  ip unnumbered Loopback0
  encapsulation ppp
  dialer in-band
  dialer idle-timeout 10800
  dialer-group 1
  peer default ip address pool dialin_pool
  ppp authentication ms-chap dial_in
 !
 interface Dialer1
  ip unnumbered Loopback1
 
 
 
 Join the worlds largest e-mail service with MSN Hotmail. Click Here
-- 
David Madland
Sr. Network Engineer
CCIE# 2016
Qwest Communications Int. Inc.
[EMAIL PROTECTED]
612-664-3367

Emotion should reflect reason not guide it




Message Posted at:
http://www.groupstudy.com/form/read.php?f=7i=29530t=29521
--
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]