Re: 911....Help Needed soft error Token Ring
You are trying to solve something that is not a real problem . The message : Last Ring Status 00:32:29 Soft Error (0x2000) indicates that the last status was a soft error . Mostlikely because insertion/removal of a station in the ring ( 1/2 hour ago ) . This is not a problem . Are actually see a problem on the ring beside this message ? flem --- Jim Barksdale [EMAIL PROTECTED] wrote: Here is what I found and the site where I found it * The Active Monitor removes circulating frames from the ring. As a frame passes the Active Monitor, a special bit called a monitor count bit is set. If the monitor count bit is set, the Active Monitor assumes the original sender of the frame was unable to remove the frame from the ring. The Active Monitor purges this frame, and sends a Token Error Soft Error to the Ring Error Monitor. http://www.landfield.com/faqs/LANs/token-ring-faq/ Jim Leon Bass wrote: I have been trying to track down a solution for this error, any suggestions are appreciated. I have changed cables. And in the process of scheduling to switch TokenRing cards. I have pasted the interface with the erroe as it appears. TokenRing0/0 is up, line protocol is up Hardware is IBM, address is 1110.12ae.1212 (bia 0180.69ae.1234) Internet address is 192.99.29.1/24 MTU 4464 bytes, BW 16000 Kbit, DLY 630 usec, reliability 255/255, txload 1/255, rxload 1/255 Encapsulation SNAP, loopback not set Keepalive set (10 sec) ARP type: SNAP, ARP Timeout 04:00:00 Ring speed: 16 Mbps Duplex: half Mode: Classic token ring station Group Address: 0x, Functional Address: 0x0800 Ethernet Transit OUI: 0x00 Last Ring Status 00:32:29 Soft Error (0x2000) Last input 00:00:00, output 00:00:00, output hang never Last clearing of "show interface" counters never Queueing strategy: fifo Output queue 0/40, 0 drops; input queue 0/75, 0 drops 5 minute input rate 1 bits/sec, 11 packets/sec 5 minute output rate 2000 bits/sec, 3 packets/sec 2968655 packets input, 416906220 bytes, 0 no buffer Received 0 broadcasts, 0 runts, 0 giants, 0 throttles 256 input errors, 2 CRC, 0 frame, 0 overrun, 0 ignored, 0 abort --More-- __ Do You Yahoo!? Send instant messages get email alerts with Yahoo! Messenger. http://im.yahoo.com/ **NOTE: New CCNA/CCDA List has been formed. For more information go to http://www.groupstudy.com/list/Associates.html _ UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html FAQ, list archives, and subscription info: http://www.groupstudy.com Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: 911....Help Needed soft error Token Ring
THANKS GUYS!! Flem wrote: You are trying to solve something that is not a real problem . The message : Last Ring Status 00:32:29 Soft Error (0x2000) indicates that the last status was a soft error . Mostlikely because insertion/removal of a station in the ring ( 1/2 hour ago ) . This is not a problem . Are actually see a problem on the ring beside this message ? flem --- Jim Barksdale [EMAIL PROTECTED] wrote: Here is what I found and the site where I found it * The Active Monitor removes circulating frames from the ring. As a frame passes the Active Monitor, a special bit called a monitor count bit is set. If the monitor count bit is set, the Active Monitor assumes the original sender of the frame was unable to remove the frame from the ring. The Active Monitor purges this frame, and sends a Token Error Soft Error to the Ring Error Monitor. http://www.landfield.com/faqs/LANs/token-ring-faq/ Jim Leon Bass wrote: I have been trying to track down a solution for this error, any suggestions are appreciated. I have changed cables. And in the process of scheduling to switch TokenRing cards. I have pasted the interface with the erroe as it appears. TokenRing0/0 is up, line protocol is up Hardware is IBM, address is 1110.12ae.1212 (bia 0180.69ae.1234) Internet address is 192.99.29.1/24 MTU 4464 bytes, BW 16000 Kbit, DLY 630 usec, reliability 255/255, txload 1/255, rxload 1/255 Encapsulation SNAP, loopback not set Keepalive set (10 sec) ARP type: SNAP, ARP Timeout 04:00:00 Ring speed: 16 Mbps Duplex: half Mode: Classic token ring station Group Address: 0x, Functional Address: 0x0800 Ethernet Transit OUI: 0x00 Last Ring Status 00:32:29 Soft Error (0x2000) Last input 00:00:00, output 00:00:00, output hang never Last clearing of "show interface" counters never Queueing strategy: fifo Output queue 0/40, 0 drops; input queue 0/75, 0 drops 5 minute input rate 1 bits/sec, 11 packets/sec 5 minute output rate 2000 bits/sec, 3 packets/sec 2968655 packets input, 416906220 bytes, 0 no buffer Received 0 broadcasts, 0 runts, 0 giants, 0 throttles 256 input errors, 2 CRC, 0 frame, 0 overrun, 0 ignored, 0 abort --More-- __ Do You Yahoo!? Send instant messages get email alerts with Yahoo! Messenger. http://im.yahoo.com/ **NOTE: New CCNA/CCDA List has been formed. For more information go to http://www.groupstudy.com/list/Associates.html _ UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html FAQ, list archives, and subscription info: http://www.groupstudy.com Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] **NOTE: New CCNA/CCDA List has been formed. For more information go to http://www.groupstudy.com/list/Associates.html _ UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html FAQ, list archives, and subscription info: http://www.groupstudy.com Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: 911....Help Needed soft error Token Ring
Here is what I found and the site where I found it * The Active Monitor removes circulating frames from the ring. As a frame passes the Active Monitor, a special bit called a monitor count bit is set. If the monitor count bit is set, the Active Monitor assumes the original sender of the frame was unable to remove the frame from the ring. The Active Monitor purges this frame, and sends a Token Error Soft Error to the Ring Error Monitor. http://www.landfield.com/faqs/LANs/token-ring-faq/ Jim Leon Bass wrote: I have been trying to track down a solution for this error, any suggestions are appreciated. I have changed cables. And in the process of scheduling to switch TokenRing cards. I have pasted the interface with the erroe as it appears. TokenRing0/0 is up, line protocol is up Hardware is IBM, address is 1110.12ae.1212 (bia 0180.69ae.1234) Internet address is 192.99.29.1/24 MTU 4464 bytes, BW 16000 Kbit, DLY 630 usec, reliability 255/255, txload 1/255, rxload 1/255 Encapsulation SNAP, loopback not set Keepalive set (10 sec) ARP type: SNAP, ARP Timeout 04:00:00 Ring speed: 16 Mbps Duplex: half Mode: Classic token ring station Group Address: 0x, Functional Address: 0x0800 Ethernet Transit OUI: 0x00 Last Ring Status 00:32:29 Soft Error> (0x2000) Last input 00:00:00, output 00:00:00, output hang never Last clearing of "show interface" counters never Queueing strategy: fifo Output queue 0/40, 0 drops; input queue 0/75, 0 drops 5 minute input rate 1 bits/sec, 11 packets/sec 5 minute output rate 2000 bits/sec, 3 packets/sec 2968655 packets input, 416906220 bytes, 0 no buffer Received 0 broadcasts, 0 runts, 0 giants, 0 throttles 256 input errors, 2 CRC, 0 frame, 0 overrun, 0 ignored, 0 abort --More--
911....Help Needed soft error Token Ring
I have been trying to track down a solution for this error, any suggestions are appreciated. I have changed cables. And in the process of scheduling to switch TokenRing cards. I have pasted the interface with the erroe as it appears. TokenRing0/0 is up, line protocol is up Hardware is IBM, address is 1110.12ae.1212 (bia 0180.69ae.1234) Internet address is 192.99.29.1/24 MTU 4464 bytes, BW 16000 Kbit, DLY 630 usec, reliability 255/255, txload 1/255, rxload 1/255 Encapsulation SNAP, loopback not set Keepalive set (10 sec) ARP type: SNAP, ARP Timeout 04:00:00 Ring speed: 16 Mbps Duplex: half Mode: Classic token ring station Group Address: 0x, Functional Address: 0x0800 Ethernet Transit OUI: 0x00 Last Ring Status 00:32:29 Soft Error> (0x2000) Last input 00:00:00, output 00:00:00, output hang never Last clearing of "show interface" counters never Queueing strategy: fifo Output queue 0/40, 0 drops; input queue 0/75, 0 drops 5 minute input rate 1 bits/sec, 11 packets/sec 5 minute output rate 2000 bits/sec, 3 packets/sec 2968655 packets input, 416906220 bytes, 0 no buffer Received 0 broadcasts, 0 runts, 0 giants, 0 throttles 256 input errors, 2 CRC, 0 frame, 0 overrun, 0 ignored, 0 abort --More--