Average Load

2000-10-24 Thread Curtis Call 

Is there a way to get the average utilization on an interface (serial) for more than 
the default 5 minute period shown by show interfaces?  Perhaps if there was a setting 
to increase the time period used, or a command that would keep a running tally or even 
a way to record the utilization in the syslog every so often.  Any ideas on how to do 
this without resorting to using a third party application?

Thanks.

_
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]

Re: Average Load

2000-10-24 Thread Michael Fountain 

You can change the sampling time using the 'load-interval [interval]' 
command. That will give you anything from 30 seconds to 10 minutes in 30 
second increments.



Is there a way to get the average utilization on an interface (serial) for 
more than the default 5 minute period shown by show interfaces?  Perhaps if 
there was a setting to increase the time period used, or a command that 
would keep a running tally or even a way to record the utilization in the 
syslog every so often.  Any ideas on how to do this without resorting to 
using a third party application?

Thanks.

_
Get Your Private, Free E-mail from MSN Hotmail at http://www.hotmail.com.

Share information about yourself, create your own public profile at 
http://profiles.msn.com.

_
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]