RE: Help with RSP4+ and normal boot sequence in a 7 [7:47408]
I don't know, but your software versions are different. On the working on it is: (RSP-IK8SV-M), Version 12.2(7a) On the broken one it is: (RSP-JK8SV-M), Version 12.2(7c) Could that be a cause of the problem ... Sorry no access to internet currently? -Original Message- From: David j [mailto:[EMAIL PROTECTED]] Sent: 25 June 2002 20:39 To: [EMAIL PROTECTED] Subject: Help with RSP4+ and normal boot sequence in a 7 [7:47408] Hi boys! I'm having problems with a 7500 I have upgraded a few weeks ago, when I type sh ver in others 7500 that I have, I can see these lines: ---xx--- Cisco Internetwork Operating System Software IOS (tm) RSP Software (RSP-IK8SV-M), Version 12.2(7a), RELEASE SOFTWARE (fc2) Copyright (c) 1986-2002 by cisco Systems, Inc. Compiled Thu 21-Feb-02 04:23 by pwade Image text-base: 0x600109C8, data-base: 0x6179A000 ROM: System Bootstrap, Version 12.0(10r)S1, RELEASE SOFTWARE (fc1) BOOTLDR: RSP Software (RSP-BOOT-M), Version 12.2(7a), RELEASE SOFTWARE (fc2) ---xx--- However when I do the same on the problematic router I can see the following: Cisco Internetwork Operating System Software IOS (tm) RSP Software (RSP-JK8SV-M), Version 12.2(7c), RELEASE SOFTWARE (fc1) Copyright (c) 1986-2002 by cisco Systems, Inc. Compiled Sat 11-May-02 11:02 by pwade Image text-base: 0x600109C8, data-base: 0x61B28000 ROM: System Bootstrap, Version 12.0(10r)S1, RELEASE SOFTWARE (fc1) So as you can see, I can't see any reference to the BOOTLDR. I've talked with the boys at TAC and they haven't got any solution (I've rebooted the router 4 or 5 times, upgraded and downgraded the software) Anybody knows what is the correct process for booting a 7500 with a RSP4+? Cisco says that RSP4+ boots the main image directly without loading the bootflash, but I have 7 routers loading the bootflash before loading the main image. Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=47570&t=47408 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: Help with RSP4+ and normal boot sequence in a 7 [7:47408]
Hello (my first post!), I have had a similar problem with my lab ls1010 ASP. It would always load the image from the bootflash instead of the PCMCIA card camping in slot0:. With the config register set to 0x2102 I tried the following: -removing the flash simm from the ASP forced a boot to slot0: (there is no image in the bootflash in this case) -putting a "boot system flash slot0:" (pretty sure that is the syntax) also worked, but the system takes a while to boot. It looks like it loads the bootflash, then it interprets the config file and says to itself "he wants a different image" and goes about loading it. Hope this can help! Joe Tutokey ""David j"" wrote in message [EMAIL PROTECTED]">news:[EMAIL PROTECTED]... > Hi boys! > I'm having problems with a 7500 I have upgraded a few weeks ago, when I type > sh ver in others 7500 that I have, I can see these lines: > ---xx--- > Cisco Internetwork Operating System Software > IOS (tm) RSP Software (RSP-IK8SV-M), Version 12.2(7a), RELEASE SOFTWARE (fc2) > Copyright (c) 1986-2002 by cisco Systems, Inc. > Compiled Thu 21-Feb-02 04:23 by pwade > Image text-base: 0x600109C8, data-base: 0x6179A000 > ROM: System Bootstrap, Version 12.0(10r)S1, RELEASE SOFTWARE (fc1) > BOOTLDR: RSP Software (RSP-BOOT-M), Version 12.2(7a), RELEASE SOFTWARE (fc2) > ---xx--- > However when I do the same on the problematic router I can see the > following: > > Cisco Internetwork Operating System Software > IOS (tm) RSP Software (RSP-JK8SV-M), Version 12.2(7c), RELEASE SOFTWARE (fc1) > Copyright (c) 1986-2002 by cisco Systems, Inc. > Compiled Sat 11-May-02 11:02 by pwade > Image text-base: 0x600109C8, data-base: 0x61B28000 > ROM: System Bootstrap, Version 12.0(10r)S1, RELEASE SOFTWARE (fc1) > > So as you can see, I can't see any reference to the BOOTLDR. I've talked > with the boys at TAC and they haven't got any solution (I've rebooted the > router 4 or 5 times, upgraded and downgraded the software) > Anybody knows what is the correct process for booting a 7500 with a RSP4+? > Cisco says that RSP4+ boots the main image directly without loading the > bootflash, but I have 7 routers loading the bootflash before loading the > main image. Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=47424&t=47408 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
RE: Help with RSP4+ and normal boot sequence in a 7 [7:47408]
If you do a "show boot" is there any value for the BOOTLDR variable - on either the questionable router or the others? My guess is that you have a "boot bootldr filename" line in your config for those that show a boot image. Second guess is that the questionable router doesn't have any bootflash. Please post your solution to the list. > -Original Message- > From: David j [mailto:[EMAIL PROTECTED]] > Sent: Tuesday, June 25, 2002 1:39 PM > To: [EMAIL PROTECTED] > Subject: Help with RSP4+ and normal boot sequence in a 7 [7:47408] > > > Hi boys! > I'm having problems with a 7500 I have upgraded a few weeks > ago, when I type > sh ver in others 7500 that I have, I can see these lines: > ---xx--- > Cisco Internetwork Operating System Software > IOS (tm) RSP Software (RSP-IK8SV-M), Version 12.2(7a), > RELEASE SOFTWARE (fc2) > Copyright (c) 1986-2002 by cisco Systems, Inc. > Compiled Thu 21-Feb-02 04:23 by pwade > Image text-base: 0x600109C8, data-base: 0x6179A000 > ROM: System Bootstrap, Version 12.0(10r)S1, RELEASE SOFTWARE (fc1) > BOOTLDR: RSP Software (RSP-BOOT-M), Version 12.2(7a), RELEASE > SOFTWARE (fc2) > ---xx--- > However when I do the same on the problematic router I can see the > following: > > Cisco Internetwork Operating System Software > IOS (tm) RSP Software (RSP-JK8SV-M), Version 12.2(7c), > RELEASE SOFTWARE (fc1) > Copyright (c) 1986-2002 by cisco Systems, Inc. > Compiled Sat 11-May-02 11:02 by pwade > Image text-base: 0x600109C8, data-base: 0x61B28000 > ROM: System Bootstrap, Version 12.0(10r)S1, RELEASE SOFTWARE (fc1) > > So as you can see, I can't see any reference to the BOOTLDR. > I've talked > with the boys at TAC and they haven't got any solution (I've > rebooted the > router 4 or 5 times, upgraded and downgraded the software) > Anybody knows what is the correct process for booting a 7500 > with a RSP4+? > Cisco says that RSP4+ boots the main image directly without > loading the > bootflash, but I have 7 routers loading the bootflash before > loading the > main image. Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=47417&t=47408 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Help with RSP4+ and normal boot sequence in a 7 [7:47408]
Hi boys! I'm having problems with a 7500 I have upgraded a few weeks ago, when I type sh ver in others 7500 that I have, I can see these lines: ---xx--- Cisco Internetwork Operating System Software IOS (tm) RSP Software (RSP-IK8SV-M), Version 12.2(7a), RELEASE SOFTWARE (fc2) Copyright (c) 1986-2002 by cisco Systems, Inc. Compiled Thu 21-Feb-02 04:23 by pwade Image text-base: 0x600109C8, data-base: 0x6179A000 ROM: System Bootstrap, Version 12.0(10r)S1, RELEASE SOFTWARE (fc1) BOOTLDR: RSP Software (RSP-BOOT-M), Version 12.2(7a), RELEASE SOFTWARE (fc2) ---xx--- However when I do the same on the problematic router I can see the following: Cisco Internetwork Operating System Software IOS (tm) RSP Software (RSP-JK8SV-M), Version 12.2(7c), RELEASE SOFTWARE (fc1) Copyright (c) 1986-2002 by cisco Systems, Inc. Compiled Sat 11-May-02 11:02 by pwade Image text-base: 0x600109C8, data-base: 0x61B28000 ROM: System Bootstrap, Version 12.0(10r)S1, RELEASE SOFTWARE (fc1) So as you can see, I can't see any reference to the BOOTLDR. I've talked with the boys at TAC and they haven't got any solution (I've rebooted the router 4 or 5 times, upgraded and downgraded the software) Anybody knows what is the correct process for booting a 7500 with a RSP4+? Cisco says that RSP4+ boots the main image directly without loading the bootflash, but I have 7 routers loading the bootflash before loading the main image. Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=47408&t=47408 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
