ISDN question. [7:71653]
Hello all, I have a practice lab setup as follows : R1 ( bri int ) -- ISDN switch --- (bri int ) -- R2. I have configured the ISDN simulator with Basic-ni1 settings and the directory #s and SPIDs for both the ports. The following output I see when I issue " sh isdn status" R1. == ISDNSW1#sh isdn status Global ISDN Switchtype = basic-ni ISDN BRI1/0 interface dsl 8, interface ISDN Switchtype = basic-ni Layer 1 Status: ACTIVE Layer 2 Status: TEI = 65, Ces = 1, SAPI = 0, State = MULTIPLE_FRAME_ESTABLISHED TEI 65, ces = 1, state = 8(established) spid1 configured, spid1 sent, spid1 NOT valid TEI Not Assigned, ces = 2, state = 1(terminal down) spid2 configured, spid2 NOT sent, spid2 NOT valid Layer 3 Status: 0 Active Layer 3 Call(s) Active dsl 8 CCBs = 0 The Free Channel Mask: 0x8003 on R2 === Global ISDN Switchtype = basic-ni ISDN BRI1/0 interface dsl 8, interface ISDN Switchtype = basic-ni Layer 1 Status: ACTIVE Layer 2 Status: TEI = 64, Ces = 2, SAPI = 0, State = TEI_ASSIGNED TEI = 255, Ces = 1, SAPI = 0, State = ESTABLISH_AWAITING_TEI TEI Not Assigned, ces = 1, state = 3(await establishment) spid1 configured, spid1 NOT sent, spid1 NOT valid TEI 64, ces = 2, state = 1(terminal down) spid2 configured, spid2 sent, spid2 valid Endpoint ID Info: epsf = 0, usid = 3, tid = 1 Layer 3 Status: 0 Active Layer 3 Call(s) CCB:callid=0, sapi=0, ces=1, B-chan=0, calltype=INTERNAL (BR1/0) SPC Call Active dsl 8 CCBs = 1 The Free Channel Mask: 0x8003 = Can anybody suggest what could be the reason for this inconsistent output? Thanks, Rajesh Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=71653&t=71653 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: ISDN question. [7:71653]
Check you Spids they are not valid on both the router and simulator. If they are correct issue the command clear int bri0 which will clear the bri interface. If this doesn't work you may have to reboot your routers and simulator. ""Rajesh Kumar"" wrote in message news:[EMAIL PROTECTED] > Hello all, > > I have a practice lab setup as follows : > > > R1 ( bri int ) -- ISDN switch --- > (bri int ) -- R2. > > > I have configured the ISDN simulator with Basic-ni1 settings and the > directory #s and SPIDs for both the ports. > > The following output I see when I issue " sh isdn status" > > R1. > > == > ISDNSW1#sh isdn status > Global ISDN Switchtype = basic-ni > ISDN BRI1/0 interface > dsl 8, interface ISDN Switchtype = basic-ni > Layer 1 Status: > ACTIVE > Layer 2 Status: > TEI = 65, Ces = 1, SAPI = 0, State = MULTIPLE_FRAME_ESTABLISHED > TEI 65, ces = 1, state = 8(established) > spid1 configured, spid1 sent, spid1 NOT valid > TEI Not Assigned, ces = 2, state = 1(terminal down) > spid2 configured, spid2 NOT sent, spid2 NOT valid > Layer 3 Status: > 0 Active Layer 3 Call(s) > Active dsl 8 CCBs = 0 > The Free Channel Mask: 0x8003 > > on R2 > > === > Global ISDN Switchtype = basic-ni > ISDN BRI1/0 interface > dsl 8, interface ISDN Switchtype = basic-ni > Layer 1 Status: > ACTIVE > Layer 2 Status: > TEI = 64, Ces = 2, SAPI = 0, State = TEI_ASSIGNED > TEI = 255, Ces = 1, SAPI = 0, State = ESTABLISH_AWAITING_TEI > TEI Not Assigned, ces = 1, state = 3(await establishment) > spid1 configured, spid1 NOT sent, spid1 NOT valid > TEI 64, ces = 2, state = 1(terminal down) > spid2 configured, spid2 sent, spid2 valid > Endpoint ID Info: epsf = 0, usid = 3, tid = 1 > Layer 3 Status: > 0 Active Layer 3 Call(s) > CCB:callid=0, sapi=0, ces=1, B-chan=0, calltype=INTERNAL (BR1/0) > SPC Call > Active dsl 8 CCBs = 1 > The Free Channel Mask: 0x8003 > = > > Can anybody suggest what could be the reason for this inconsistent > output? > > Thanks, > Rajesh Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=71708&t=71653 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]