RE: PIX FIREWALL UPGRADE [7:5976]
Hello all, In 4.x you can see the activation key only when you try to upgrade the PIX IOS. You can upgrade to whatever version you like (as long as you have the required flash and ram). For example I have upgraded a 4.4(5) to 6.0(1) without any problems. Regards = Panayiotis PsihoyiosSyNET S.A. CCNP (Security, ATM), CCDP, MCP 118 B, Agias Eleoussis Street Network EngineerGR 151 25 Maroussi email: [EMAIL PROTECTED] Athens - Greece Tel:++ 301 61 29 500Fax: ++ 301 61 25 313 = -Original Message- From: Allen May [mailto:[EMAIL PROTECTED]] Sent: Tuesday, May 29, 2001 7:51 PM To: [EMAIL PROTECTED] Subject: Re: PIX FIREWALL UPGRADE [7:5976] Just upgrade one version at a time. I believe the next upgrade is the one that starts showing the activation keys. You can do one upgrade, get the key, then go to the version you want, OR just keep going one version at a time. Either way works but you need to get the key by upgrading one version first either way. Allen - Original Message - From: netman To: Sent: Tuesday, May 29, 2001 8:56 AM Subject: Re: PIX FIREWALL UPGRADE [7:5976] I am not sure if 4.44 showed the activation key in show ver. I don't think the Pix will run if it didn't have an activation key. - Original Message - From: Jtnatas Amorim To: Sent: Friday, May 25, 2001 4:32 PM Subject: PIX FIREWALL UPGRADE [7:5976] I'd be grateful if someone could help me solve this problem: I have a PIX 520 in a customer network with the following show version command results: pix# sh versh har PIX Version 4.4(4) Compiled on Thu 06-Jan-00 16:07 by pixbuild pix up 2 days 3 hours Hardware: SE440BX2, 128 MB RAM, CPU Pentium II 349 MHz Flash strata @ base 0x300 0: ethernet0: address is 00d0.b785.4f86, irq 11 1: ethernet1: address is 00d0.b783.e78a, irq 10 Licensed Connections: 128 Serial Number: 18029118 Please I'd like to know if in the case of a PIX software upgrade from a 4.4(4) to a 5.2(1) version, I will need a activation Key. Note: As you can see with the show version command, actually the device does not have a activation key. Thank in advance, __ ___ Get Your Private, Free E-mail from MSN Hotmail at http://www.hotmail.com. FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=6382t=5976 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: PIX FIREWALL UPGRADE [7:5976]
I'm fairly sure you don't need the activation key at all. I've written it down before, to play safe, but never needed it once it's on the box. Only time I've ever had to put one in is to activate new features after IOS install. Does anybody know of any exceptions to this which my complacency may drop me the wrong side of one day. Cheers, Gaz Jtnatas Amorim wrote in message [EMAIL PROTECTED]">news:[EMAIL PROTECTED]... I'd be grateful if someone could help me solve this problem: I have a PIX 520 in a customer network with the following show version command results: pix# sh versh har PIX Version 4.4(4) Compiled on Thu 06-Jan-00 16:07 by pixbuild pix up 2 days 3 hours Hardware: SE440BX2, 128 MB RAM, CPU Pentium II 349 MHz Flash strata @ base 0x300 0: ethernet0: address is 00d0.b785.4f86, irq 11 1: ethernet1: address is 00d0.b783.e78a, irq 10 Licensed Connections: 128 Serial Number: 18029118 Please I'd like to know if in the case of a PIX software upgrade from a 4.4(4) to a 5.2(1) version, I will need a activation Key. Note: As you can see with the show version command, actually the device does not have a activation key. Thank in advance, _ Get Your Private, Free E-mail from MSN Hotmail at http://www.hotmail.com. FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=6478t=5976 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: PIX FIREWALL UPGRADE [7:5976]
I am not sure if 4.44 showed the activation key in show ver. I don't think the Pix will run if it didn't have an activation key. - Original Message - From: Jtnatas Amorim To: Sent: Friday, May 25, 2001 4:32 PM Subject: PIX FIREWALL UPGRADE [7:5976] I'd be grateful if someone could help me solve this problem: I have a PIX 520 in a customer network with the following show version command results: pix# sh versh har PIX Version 4.4(4) Compiled on Thu 06-Jan-00 16:07 by pixbuild pix up 2 days 3 hours Hardware: SE440BX2, 128 MB RAM, CPU Pentium II 349 MHz Flash strata @ base 0x300 0: ethernet0: address is 00d0.b785.4f86, irq 11 1: ethernet1: address is 00d0.b783.e78a, irq 10 Licensed Connections: 128 Serial Number: 18029118 Please I'd like to know if in the case of a PIX software upgrade from a 4.4(4) to a 5.2(1) version, I will need a activation Key. Note: As you can see with the show version command, actually the device does not have a activation key. Thank in advance, _ Get Your Private, Free E-mail from MSN Hotmail at http://www.hotmail.com. FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=6213t=5976 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: PIX FIREWALL UPGRADE [7:5976]
Just upgrade one version at a time. I believe the next upgrade is the one that starts showing the activation keys. You can do one upgrade, get the key, then go to the version you want, OR just keep going one version at a time. Either way works but you need to get the key by upgrading one version first either way. Allen - Original Message - From: netman To: Sent: Tuesday, May 29, 2001 8:56 AM Subject: Re: PIX FIREWALL UPGRADE [7:5976] I am not sure if 4.44 showed the activation key in show ver. I don't think the Pix will run if it didn't have an activation key. - Original Message - From: Jtnatas Amorim To: Sent: Friday, May 25, 2001 4:32 PM Subject: PIX FIREWALL UPGRADE [7:5976] I'd be grateful if someone could help me solve this problem: I have a PIX 520 in a customer network with the following show version command results: pix# sh versh har PIX Version 4.4(4) Compiled on Thu 06-Jan-00 16:07 by pixbuild pix up 2 days 3 hours Hardware: SE440BX2, 128 MB RAM, CPU Pentium II 349 MHz Flash strata @ base 0x300 0: ethernet0: address is 00d0.b785.4f86, irq 11 1: ethernet1: address is 00d0.b783.e78a, irq 10 Licensed Connections: 128 Serial Number: 18029118 Please I'd like to know if in the case of a PIX software upgrade from a 4.4(4) to a 5.2(1) version, I will need a activation Key. Note: As you can see with the show version command, actually the device does not have a activation key. Thank in advance, _ Get Your Private, Free E-mail from MSN Hotmail at http://www.hotmail.com. FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=6249t=5976 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
PIX FIREWALL UPGRADE [7:5976]
I'd be grateful if someone could help me solve this problem: I have a PIX 520 in a customer network with the following show version command results: pix# sh versh har PIX Version 4.4(4) Compiled on Thu 06-Jan-00 16:07 by pixbuild pix up 2 days 3 hours Hardware: SE440BX2, 128 MB RAM, CPU Pentium II 349 MHz Flash strata @ base 0x300 0: ethernet0: address is 00d0.b785.4f86, irq 11 1: ethernet1: address is 00d0.b783.e78a, irq 10 Licensed Connections: 128 Serial Number: 18029118 Please I'd like to know if in the case of a PIX software upgrade from a 4.4(4) to a 5.2(1) version, I will need a activation Key. Note: As you can see with the show version command, actually the device does not have a activation key. Thank in advance, _ Get Your Private, Free E-mail from MSN Hotmail at http://www.hotmail.com. Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=5976t=5976 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]