However, wanting to use more than one bri with dialer profiles I found I
need to use a loopback, and ip unnumbered lo in the dialer profile (tested
with 12.2).
Anybody found out why ? Where is this documented ? I suppose I'll find that
in the standard documentation but haven't been able to find it yet :(
Heiko
--
-- PREVINET S.p.A.[EMAIL PROTECTED]
-- Via Ferretto, 1ph x39-041-5907073
-- I-31021 Mogliano V.to (TV) fax x39-041-5907472
-- ITALY
> -Original Message-
> From: Mohannad Khuffash [mailto:[EMAIL PROTECTED]]
> Sent: Wednesday, August 28, 2002 1:07 PM
> To: [EMAIL PROTECTED]
> Subject: Re: 128Kbps instead 64kbpes [7:52190]
>
>
> In addition to dialer-load threshold, enable multilink
> support by using
> PPP multilink Command
>
> Mohannad
> ""Steven A. Ridder"" wrote in message
> [EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
> > dialer-load threshold 1either
> >
> > --
> >
> > RFC 1149 Compliant.
> >
> >
> >
> > ""Eng. ABDALLAH QUQAS"" wrote in message
> > [EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
> > > Dear ALL,
> > >
> > > how i can make ISDN BRI to connect at 128kbps instead of
> 64kbps as a
> > bundle
> > > channel of Cisco router 3600 using ppp encapsulation.
> > >
> > > Kind Regards
> > > abd quqas
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=54232&t=52190
--
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
