RE: Doubt on CLID [7:53370]
Hi Fayyaz, Thanks a lot for the info. As i was going through the Cisco Site and read across Cisco RPM, by configuring RPM will it help the modules to collect the digits? Other than ISDN any other alternative meathod is there? RegardsAnil --- Fayyaz Ahmed wrote: > Hi Anil, > > what you want to do is not possible with your current > hardware. Cisco > support caller ID on none of the analog modem products: > neither the WIC-AM > nor the NM-AM. The problem is that cisco analog modems, > (WIC-1AM, WIC-2AM, > NM-8AM, and NM-16AM) have no way to collect the caller ID > information and > pass it to IOS for processing. > You can screen by phone number using ISDN using the > 'dialer caller' command. > The reason it works with ISDN is that the call setup > message includes the > caller ID information. Unfortunatly the analog modems do > not support caller > ID, so we will be unable to collect the digits from the > switch. > I guess an alternate setup for caller ID authentication > would be to replace > the analog modem with a NM-6DM (6 Digital modems) and a > ISDN network module, > which would support CLID/ANI (if presented to us by the > switch.). This would > allow the ISDN switch to pass caller ID to the router. > > Kind Regards > > Fayyaz > > -Original Message- > From: Anil Kumar [mailto:[EMAIL PROTECTED]] > Sent: Sunday, September 15, 2002 1:32 PM > To: [EMAIL PROTECTED] > Subject: Doubt on CLID [7:53370] > > > Hi All, > > I have got following network setup. Cisco 3660 router > with > NM-16AM card. I have got a Cisco ACS v2.6 server for the > aaa function. The router is configured for the aaa for > the > dail in users. > > In order to have more security on the dail in users, i > wanted to enable the CLID faclity for the authentication > apart from the username & password. The analog lines has > been enabled with the CLID faclity by the service > provider. > > In order to make the above work does the router needs to > configured so that to pass the dialled digits to the ACS > server? > If so, please let me know the sample configuration / URL > for the router and if any special IOS is also required > for > the router. > > The 3660 Router is having 12.1 IOS version. > > Requst your help on this. > > Thanks in Advance, > > Regards...Anil > > __ > Do you Yahoo!? > Yahoo! News - Today's headlines > http://news.yahoo.com [EMAIL PROTECTED] __ Do you Yahoo!? Yahoo! News - Today's headlines http://news.yahoo.com Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=53480&t=53370 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
RE: Doubt on CLID [7:53370]
Hi Fayyaz, Thanks a lot for the information which u have given. While going through the Cisco Site, I was reading about Cisco RPM.Will Cisco RPM help or any one has tried the same? By upgrading the Cisco IOS will i be able to collect the digits on the Analog Modems with the help og Cisco RPM? Is there any other alternative meathod with the same setup. RegardsAnil --- Fayyaz Ahmed wrote: > Hi Anil, > > what you want to do is not possible with your current > hardware. Cisco > support caller ID on none of the analog modem products: > neither the WIC-AM > nor the NM-AM. The problem is that cisco analog modems, > (WIC-1AM, WIC-2AM, > NM-8AM, and NM-16AM) have no way to collect the caller ID > information and > pass it to IOS for processing. > You can screen by phone number using ISDN using the > 'dialer caller' command. > The reason it works with ISDN is that the call setup > message includes the > caller ID information. Unfortunatly the analog modems do > not support caller > ID, so we will be unable to collect the digits from the > switch. > I guess an alternate setup for caller ID authentication > would be to replace > the analog modem with a NM-6DM (6 Digital modems) and a > ISDN network module, > which would support CLID/ANI (if presented to us by the > switch.). This would > allow the ISDN switch to pass caller ID to the router. > > Kind Regards > > Fayyaz > > -Original Message- > From: Anil Kumar [mailto:[EMAIL PROTECTED]] > Sent: Sunday, September 15, 2002 1:32 PM > To: [EMAIL PROTECTED] > Subject: Doubt on CLID [7:53370] > > > Hi All, > > I have got following network setup. Cisco 3660 router > with > NM-16AM card. I have got a Cisco ACS v2.6 server for the > aaa function. The router is configured for the aaa for > the > dail in users. > > In order to have more security on the dail in users, i > wanted to enable the CLID faclity for the authentication > apart from the username & password. The analog lines has > been enabled with the CLID faclity by the service > provider. > > In order to make the above work does the router needs to > configured so that to pass the dialled digits to the ACS > server? > If so, please let me know the sample configuration / URL > for the router and if any special IOS is also required > for > the router. > > The 3660 Router is having 12.1 IOS version. > > Requst your help on this. > > Thanks in Advance, > > Regards...Anil > > __ > Do you Yahoo!? > Yahoo! News - Today's headlines > http://news.yahoo.com [EMAIL PROTECTED] = Thanks & Regards V Anil Kumar __ Do you Yahoo!? Yahoo! News - Today's headlines http://news.yahoo.com Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=53532&t=53370 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]