RE: Help, Switching Solution with 4006 [7:51799]
I was told by Cisco that Sup III didn't support IPX routing! Rik -Original Message- From: Wayne Jang [mailto:[EMAIL PROTECTED]] Sent: Wednesday, 21 August 2002 8:29 AM To: [EMAIL PROTECTED] Subject: Help, Switching Solution with 4006 [7:51799] Hi, I am proposing the following LAN solution to a customer. Does it make sense? -WS-C4006-S3(sup III engine) Do I need special licenses for this? The customer will be using IP and IPX. I saw some licensing software for the Sup III that was around $1700 for both IP and IPX. I don't know that that is all about. -One 48 port RJ45 blade for servers and workstations on same floor -One 6 port GBIC blade (WS-X4306-GB) that will be used to connect to five WS-2950s on different floors -I will use the WS-5483 GBICs to connect the 2950s to the six port WS-X4306-GB Can anyone think of things I haven't considered? Thanks Wayne Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=51821&t=51799 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
RE: Help, Switching Solution with 4006 [7:51799]
Rik is correct. The SupIII only supports IP routing protocols. To get layer3 IPX in the 4000 you will need to install the 4232 L3 blade and the enhanced IOS image for it. This would not be very clean. Do they really need the IPX? Maybe you can pitch a conversion from IPX to IP while installing the switch. I also notice that you have the 5483 TX GBIC's specked out. Are your cable runs within the distance limitations? When you are talking about running between floors you better have them tested to be sure. Tim CCIE 9015, CSS1 -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of Larkin, Richard Sent: Wednesday, August 21, 2002 4:43 AM To: [EMAIL PROTECTED] Subject: RE: Help, Switching Solution with 4006 [7:51799] I was told by Cisco that Sup III didn't support IPX routing! Rik -Original Message- From: Wayne Jang [mailto:[EMAIL PROTECTED]] Sent: Wednesday, 21 August 2002 8:29 AM To: [EMAIL PROTECTED] Subject: Help, Switching Solution with 4006 [7:51799] Hi, I am proposing the following LAN solution to a customer. Does it make sense? -WS-C4006-S3(sup III engine) Do I need special licenses for this? The customer will be using IP and IPX. I saw some licensing software for the Sup III that was around $1700 for both IP and IPX. I don't know that that is all about. -One 48 port RJ45 blade for servers and workstations on same floor -One 6 port GBIC blade (WS-X4306-GB) that will be used to connect to five WS-2950s on different floors -I will use the WS-5483 GBICs to connect the 2950s to the six port WS-X4306-GB Can anyone think of things I haven't considered? Thanks Wayne Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=51827&t=51799 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
RE: Help, Switching Solution with 4006 [7:51799]
Have you thought about using copper as an alternative to the GBICs and fiber? We use the 48 port 10/100/1000 blades with the 2950T switches (2 copper 10/100/1000 uplinks). This setup has been working well for us. Tim O'Brien wrote: > > Rik is correct. The SupIII only supports IP routing protocols. > To get layer3 > IPX in the 4000 you will need to install the 4232 L3 blade and > the enhanced > IOS image for it. This would not be very clean. Do they really > need the IPX? > Maybe you can pitch a conversion from IPX to IP while > installing the switch. > I also notice that you have the 5483 TX GBIC's specked out. Are > your cable > runs within the distance limitations? When you are talking > about running > between floors you better have them tested to be sure. > > Tim > CCIE 9015, CSS1 > > > -Original Message- > From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On > Behalf Of > Larkin, Richard > Sent: Wednesday, August 21, 2002 4:43 AM > To: [EMAIL PROTECTED] > Subject: RE: Help, Switching Solution with 4006 [7:51799] > > > I was told by Cisco that Sup III didn't support IPX routing! > > Rik > > -Original Message- > From: Wayne Jang [mailto:[EMAIL PROTECTED]] > Sent: Wednesday, 21 August 2002 8:29 AM > To: [EMAIL PROTECTED] > Subject: Help, Switching Solution with 4006 [7:51799] > > > Hi, > > I am proposing the following LAN solution to a customer. Does > it make > sense? > > -WS-C4006-S3(sup III engine) > Do I need special licenses for this? The customer will be > using IP and IPX. > I saw some licensing software for the Sup III that was around > $1700 for both > IP and IPX. I don't know that that is all about. > > -One 48 port RJ45 blade for servers and workstations on same > floor > > -One 6 port GBIC blade (WS-X4306-GB) that will be used to > connect to five > WS-2950s on different floors > > -I will use the WS-5483 GBICs to connect the 2950s to the six > port > WS-X4306-GB > > Can anyone think of things I haven't considered? > > Thanks > Wayne > > Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=51830&t=51799 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: Help, Switching Solution with 4006 [7:51799]
According to Cisco the 4006 SupIII does not support IPX. We were looking at that box for our site. We passed on it because of it not having IPX. Chris Dumais, CCNP, CNA Sr. Network Administrator NSS Customer and Desktop Services Team Maine Medical Center (207)871-6940 [EMAIL PROTECTED] >>> "Wayne Jang" 8/20/02 8:29:02 PM >>> Hi, I am proposing the following LAN solution to a customer. Does it make sense? -WS-C4006-S3(sup III engine) Do I need special licenses for this? The customer will be using IP and IPX. I saw some licensing software for the Sup III that was around $1700 for both IP and IPX. I don't know that that is all about. -One 48 port RJ45 blade for servers and workstations on same floor -One 6 port GBIC blade (WS-X4306-GB) that will be used to connect to five WS-2950s on different floors -I will use the WS-5483 GBICs to connect the 2950s to the six port WS-X4306-GB Can anyone think of things I haven't considered? Thanks Wayne Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=51833&t=51799 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
RE: Help, Switching Solution with 4006 [7:51799]
4232 L3 service blade functions only with the supii , no? regards - Diego CCIP, CCDP, CNNP Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=51855&t=51799 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: Help, Switching Solution with 4006 [7:51799]
Thanks for all the great feedback. How about this for an alternative solution. Any reason why this may not work? -4908G-L3 for backbone (I can route between vlans; works with IP and IPX) -2950G-48 for one for main floor -2950G-24 for each of the other five floors -WS-5484 GBICs for each end of fiber (12 total) Wayne ""Diego Rissone"" wrote in message [EMAIL PROTECTED]">news:[EMAIL PROTECTED]... > 4232 L3 service blade functions only with the supii , no? > > regards - Diego CCIP, CCDP, CNNP Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=51858&t=51799 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]