RE: about routing in NT server

2001-01-18 Thread Roan, Wayne

Yes, You need to put on ONE gateway on the NT Server, and that is your
external network.  You need to put "route add" statements on the NT Server
to get back to your internal.  Make sure you do not have but one default
gateway, this is important as NT will not know which interface to send
packets out if it has multiple.  I have the same setup in my office.  

Wayne

-Original Message-
From: garyty99 [mailto:[EMAIL PROTECTED]]
Sent: Thursday, January 18, 2001 12:28 AM
To: [EMAIL PROTECTED]
Subject: about routing in NT server


Hi guys:
  i install the checkpoint in my NT server ,the nt server has 3 NIC,one is
connect to external network,one is connected the internal,another one is
connected the DMZ,my question how to routing the packet from internal to DMZ
on NT server,i have open the ip routing in NT server,need i do something
else 


 thanks 




-
»¶Ó­¹âÁÙ http://www.cmmail.com

_
FAQ, list archives, and subscription info:
http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]

_
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]



Re: about routing in NT server

2001-01-18 Thread Gareth Hinton

It should know where its directly connected networks are, so you shouldn't
have to worry too much to get to your DMZ. Just make sure your default route
is set up for external interface.
Make sure if you add any routes that you use 'route add -p' to make them
persistent. Otherwise you could make a negative career move next time the
server is re-booted and all your routes go down the plug hole.

Gareth

""garyty99"" [EMAIL PROTECTED] wrote in message
01011813282300.00335@www3">news:01011813282300.00335@www3...
 Hi guys:
   i install the checkpoint in my NT server ,the nt server has 3 NIC,one is
connect to external network,one is connected the internal,another one is
connected the DMZ,my question how to routing the packet from internal to DMZ
on NT server,i have open the ip routing in NT server,need i do something
else


  thanks




 -
 »¶Ó­¹âÁÙ http://www.cmmail.com

 _
 FAQ, list archives, and subscription info:
http://www.groupstudy.com/list/cisco.html
 Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]



_
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]