Re: confreg 0x2132 instead of confreg 0x2142 [7:59549]
Go to the rom monitor mode and change your configuration register value. Press break key with in 60 seconds of router reboot,you will enter thier. then enter--- confreg 0x2142 sync -i(to reload) or use reset thats all bye Munit [EMAIL PROTECTED] wrote: I tried to do a password recovery on a 2600 router. I typed a confreg 0x2132 instead of confreg 0x2142 and reset the router. After the router reload, I only see the weird character display on my terminal. How do I fix ? Thanks in advance. __ Do you Yahoo!? Yahoo! Mail Plus - Powerful. Affordable. Sign up now. http://mailplus.yahoo.com Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=59551t=59549 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
RE: confreg 0x2132 instead of confreg 0x2142 [7:59549]
Try changing your terminal speed to 19200 baud. 0x2132 sets the console baud rate to 19200. Ted Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=59550t=59549 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: confreg 0x2132 instead of confreg 0x2142 [7:59549]
Hey what i supect is hyperterminal settings problem.Please do confirm whether u have thse settings.. Bits per sec: 9600 Data bits : 8 Parity : none Stop bits : 1 Flow control: none moreover still then try changing properties vty type/or speed if u have changed the default speed on the router earlier refer to this link http://www.cisco.com/warp/public/63/terminal_settings.html moreover if still not working then do write ,we will look some other method if possible. Munit Ps: do cc to group too so that some body may also look into the problem and probably suggest a better sol. [EMAIL PROTECTED] wrote: I am using hyperterminal. After I hit the break key, I tried to enter the command but terminal display only show me some werid character. It like the router does not understand the characte I enter. Any thought? Thanks --- Munit Singla wrote: Go to the rom monitor mode and change your configuration register value. Press break key with in 60 seconds of router reboot,you will enter thier. then enter--- confreg 0x2142 sync -i(to reload) or use reset thats all bye Munit [EMAIL PROTECTED] wrote: I tried to do a password recovery on a 2600 router. I typed a confreg 0x2132 instead of confreg 0x2142 and reset the router. After the router reload, I only see the weird character display on my terminal. How do I fix ? Thanks in advance. __ Do you Yahoo!? Yahoo! Mail Plus - Powerful. Affordable. Sign up now. http://mailplus.yahoo.com [EMAIL PROTECTED] __ Do you Yahoo!? Yahoo! Mail Plus - Powerful. Affordable. Sign up now. http://mailplus.yahoo.com Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=59554t=59549 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: confreg 0x2132 instead of confreg 0x2142 [7:59549]
Ted great, can u refer me doc for this settings and speed regarding this I couldn't find Regards, Munit. Ted Marinich wrote: Try changing your terminal speed to 19200 baud. 0x2132 sets the console baud rate to 19200. Ted Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=59555t=59549 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
RE: confreg 0x2132 instead of confreg 0x2142 [7:59549]
Here's a doc that covers the config register by bit. Keep in mind that the bits are numbered right to left starting with zero at the rightmost. Watch the wrap. http://cco-rtp-1.cisco.com/en/US/products/hw/routers/ps282/products_installa tion_guide_chapter09186a008007dfd0.html So 0x2132. The 3 covers bits number 4 and 5. Four is not significant. If 5 is set then the console speed is 19200. See also (watch the wrap) http://www.cisco.com/en/US/products/hw/routers/ps259/products_installation_g uide_chapter09186a008007e02e.html Tells how to change console speed settings from the rommon prompt. -Original Message- From: Munit Singla [mailto:[EMAIL PROTECTED]] Sent: Thursday, December 19, 2002 3:07 PM To: [EMAIL PROTECTED] Subject: Re: confreg 0x2132 instead of confreg 0x2142 [7:59549] Ted great, can u refer me doc for this settings and speed regarding this I couldn't find Regards, Munit. Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=59562t=59549 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: confreg 0x2132 instead of confreg 0x2142 [7:59549]
Thanx Daniel Regards, Munit Daniel Cotts wrote: Here's a doc that covers the config register by bit. Keep in mind that the bits are numbered right to left starting with zero at the rightmost. Watch the wrap. http://cco-rtp-1.cisco.com/en/US/products/hw/routers/ps282/products_installa tion_guide_chapter09186a008007dfd0.html So 0x2132. The 3 covers bits number 4 and 5. Four is not significant. If 5 is set then the console speed is 19200. See also (watch the wrap) http://www.cisco.com/en/US/products/hw/routers/ps259/products_installation_g uide_chapter09186a008007e02e.html Tells how to change console speed settings from the rommon prompt. -Original Message- From: Munit Singla [mailto:[EMAIL PROTECTED]] Sent: Thursday, December 19, 2002 3:07 PM To: [EMAIL PROTECTED] Subject: Re: confreg 0x2132 instead of confreg 0x2142 [7:59549] Ted great, can u refer me doc for this settings and speed regarding this I couldn't find Regards, Munit. Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=59566t=59549 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: confreg 0x2132 instead of confreg 0x2142 [7:59549]
Hi, Your problem is the line speed. Register value 0x2132 specifies the line speed. Change it and you will sleep well tonight otherwise, declare no-sleep on yourself... Further reading : http://www.cisco.com/en/US/products/hw/routers/ps233/products_tech_note09186 a00800a65a5.shtml Regards. Godswill - Original Message - From: To: Sent: Thursday, December 19, 2002 2:41 PM Subject: confreg 0x2132 instead of confreg 0x2142 [7:59549] I tried to do a password recovery on a 2600 router. I typed a confreg 0x2132 instead of confreg 0x2142 and reset the router. After the router reload, I only see the weird character display on my terminal. How do I fix ? Thanks in advance. __ Do you Yahoo!? Yahoo! Mail Plus - Powerful. Affordable. Sign up now. http://mailplus.yahoo.com Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=59571t=59549 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: confreg 0x2132 instead of confreg 0x2142 [7:59549]
Odd - this link didn't work for me until I replaced the cco-rtp-1 host with plain ol' www...if anyone else had this problem, give it a shot. http://cco-rtp-1.cisco.com/en/US/products/hw/routers/ps282/products_installa tion_guide_chapter09186a008007dfd0.html BJ Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=59569t=59549 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
