RE: connecting T1 modules [7:12139]
T-1s use pins 1&2 and 4&5. So make a special crossover cable: 1 to 4, 2 to 5, 4 to 1, 5 to 2. You can use a pair of RJ-45 jacks for the crossover using some spare wire - then use regular patch cables from the jacks to the routers. Side note: 56k uses pins 1&2 and 7&8. A console rollover cable works fine for that. > -Original Message- > From: anthony moore [mailto:[EMAIL PROTECTED]] > Sent: Thursday, July 12, 2001 10:13 AM > To: [EMAIL PROTECTED] > Subject: connecting T1 modules [7:12139] > > > Anyone know what kind of cable to use to connect two T1 > modules? I have a > 2525 with the Fractional/full T1 module(RJ45) and a 2621 with the > WIC-1DSU-T1 module(RJ45). What kind of cable can I use to > connect these > momdules? > > Thanks > Report misconduct > and Nondisclosure violations to [EMAIL PROTECTED] Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=12168&t=12139 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
RE: connecting T1 modules [7:12139]
You can use a cat5 cable pin out is 1245 to 4512 Jon -Original Message- From: Ayers, Michael [mailto:[EMAIL PROTECTED]] Sent: Thursday, July 12, 2001 9:25 AM To: [EMAIL PROTECTED] Subject: RE: connecting T1 modules [7:12139] Look up the pinout of each rj45 I think it's a roll cable, but you need to connect TX to RX and Visa Versa. Make sure you set up clocking one external and one internal -Original Message- From: anthony moore [mailto:[EMAIL PROTECTED]] Sent: Thursday, July 12, 2001 8:13 AM To: [EMAIL PROTECTED] Subject:connecting T1 modules [7:12139] Anyone know what kind of cable to use to connect two T1 modules? I have a 2525 with the Fractional/full T1 module(RJ45) and a 2621 with the WIC-1DSU-T1 module(RJ45). What kind of cable can I use to connect these momdules? Thanks Privileged/Confidential Information may be contained in this message or attachments hereto. Please advise immediately if you or your employer do not consent to Internet email for messages of this kind. Opinions, conclusions and other information in this message that do not relate to the official business of this company shall be understood as neither given nor endorsed by it. Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=12164&t=12139 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
RE: connecting T1 modules [7:12139]
Look up the pinout of each rj45 I think it's a roll cable, but you need to connect TX to RX and Visa Versa. Make sure you set up clocking one external and one internal -Original Message- From: anthony moore [mailto:[EMAIL PROTECTED]] Sent: Thursday, July 12, 2001 8:13 AM To: [EMAIL PROTECTED] Subject:connecting T1 modules [7:12139] Anyone know what kind of cable to use to connect two T1 modules? I have a 2525 with the Fractional/full T1 module(RJ45) and a 2621 with the WIC-1DSU-T1 module(RJ45). What kind of cable can I use to connect these momdules? Thanks Privileged/Confidential Information may be contained in this message or attachments hereto. Please advise immediately if you or your employer do not consent to Internet email for messages of this kind. Opinions, conclusions and other information in this message that do not relate to the official business of this company shall be understood as neither given nor endorsed by it. Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=12155&t=12139 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
