I have configured both the CX-AIP and NP-ATM-OC3 SM P/N?? cards back to back
so would guess that you could do that with PAs.
-Original Message-
From: Donald B Johnson jr [mailto:[EMAIL PROTECTED]]
Sent: Monday, July 30, 2001 12:37 PM
To: [EMAIL PROTECTED]
Subject: Re: experience with pa-a1-oc3mm or the pa-a3-t3
cards [7:14196]
First one would be how to access the console of the switch.
Is that a serial
connection or is there a IP address that you can telnet into
like a private
192.168.x.x address.
Second do you know where I could get some documentation on
these switches,
not sales stuff, but how to configure. Something like cisco
command and
config references.
Third can either one of these cards be connected back-to-back
without a
switch.
- Original Message -
From: Spencer Plantier
To: Donald B Johnson jr ;
Sent: Monday, July 30, 2001 9:52 AM
Subject: Re: experience with pa-a1-oc3mm or the pa-a3-t3
cards [7:14196]
Sure whats up?
--- Donald B Johnson jr
wrote:
Does anybody have any experience with pa-a1-oc3mm or
the pa-a3-t3 cards and
marconi/fore switches. If you do Please contact me I
have a few questions.
Thank You,
Donald
[EMAIL PROTECTED]
=
Spencer Plantier
Internet Solutions Engineer
Voice 919-949-9993
Cell 919-696-8848
__
Do You Yahoo!?
Make international calls for as low as $.04/minute with
Yahoo! Messenger
http://phonecard.yahoo.com/
Report misconduct
and Nondisclosure violations to [EMAIL PROTECTED]
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7i=14234t=14196
--
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
