Re: password recovery problem with AAA [7:3735]

2001-05-09 Thread Michael E Taiwo

Try out this page on cisco site
http://www.cisco.com/warp/public/474/pswdrec_1700.shtml

Michael.
- Original Message -
From: Sim, CT (Chee Tong) 
To: 
Sent: Wednesday, May 09, 2001 5:24 AM
Subject: password recovery problem with AAA [7:3735]


 I am doing a password recovery for a 1700 router, I manage to see its
 previous configuration part.  But I want to do a conf term to change
 setting. I found it was controlled by TACACS+ AAA server.   How do I
disable
 the setting of AAA so I can make change  See below


 rommom 1confreg 0X2142
 rommom 2reset
 Routerenable

 Router#conf mem

 Building configuration...

 00:00:57: %IP_SNMP-3-SOCKET: can't open UDP socket
 KUL01#
 KUL01#
 *Mar  1 00:01:08: %LINEPROTO-5-UPDOWN: Line protocol on Interface
Serial0.2,
 cha
 nged state to down
 *Mar  1 00:01:08: %SYS-5-CONFIG_I: Configured from memory by console
 KUL01#conf term
 Command authorization failed.

 KUL01#
 *Mar  1 00:01:28: %-3-INVSTATE:  AUTHOR/CMD: Internal state is
invalid:
 astr
 uct 0x8093FF00 ustruct 0x0
 -Traceback= 8006C154 8006C01C 800A41D0 800A5098 800B0CB8 80114BE0



 ==
 De informatie opgenomen in dit bericht kan vertrouwelijk zijn en
 is uitsluitend bestemd voor de geadresseerde. Indien u dit bericht
 onterecht ontvangt wordt u verzocht de inhoud niet te gebruiken en
 de afzender direct te informeren door het bericht te retourneren.
 ==
 The information contained in this message may be confidential
 and is intended to be exclusively for the addressee. Should you
 receive this message unintentionally, please do not use the contents
 herein and notify the sender immediately by return e-mail.


 ==
 FAQ, list archives, and subscription info:
http://www.groupstudy.com/list/cisco.html
 Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]




Message Posted at:
http://www.groupstudy.com/form/read.php?f=7i=3762t=3735
--
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]



RE: password recovery problem with AAA [7:3735]

2001-05-08 Thread Daniel Cotts

I would guess that if you boot the router ignoring the content of NVRAM that
you could then view the startup config (show start). You might then want to
do a cut and paste to Notepad or capture the output of your terminal
program. If loading the config disallows you from doing anything, then best
to erase start and reload. That wipes the router clean. Then config t and
use the Notepad copy to enter the parts that you need.

 -Original Message-
 From: Sim, CT (Chee Tong) [mailto:[EMAIL PROTECTED]]
 Sent: Tuesday, May 08, 2001 11:25 PM
 To: [EMAIL PROTECTED]
 Subject: password recovery problem with AAA [7:3735]
 
 
 I am doing a password recovery for a 1700 router, I manage to see its
 previous configuration part.  But I want to do a conf term to change
 setting. I found it was controlled by TACACS+ AAA server.   
 How do I disable
 the setting of AAA so I can make change  See below
 
 
 rommom 1confreg 0X2142
 rommom 2reset
 Routerenable
 
 Router#conf mem
 
 Building configuration...
 
 00:00:57: %IP_SNMP-3-SOCKET: can't open UDP socket
 KUL01#
 KUL01#
 *Mar  1 00:01:08: %LINEPROTO-5-UPDOWN: Line protocol on 
 Interface Serial0.2,
 cha
 nged state to down
 *Mar  1 00:01:08: %SYS-5-CONFIG_I: Configured from memory by console
 KUL01#conf term
 Command authorization failed.
 
 KUL01#
 *Mar  1 00:01:28: %-3-INVSTATE:  AUTHOR/CMD: Internal 
 state is invalid:
 astr
 uct 0x8093FF00 ustruct 0x0
 -Traceback= 8006C154 8006C01C 800A41D0 800A5098 800B0CB8 80114BE0
 
 
 
 ==
 De informatie opgenomen in dit bericht kan vertrouwelijk zijn en 
 is uitsluitend bestemd voor de geadresseerde. Indien u dit bericht 
 onterecht ontvangt wordt u verzocht de inhoud niet te gebruiken en 
 de afzender direct te informeren door het bericht te retourneren. 
 ==
 The information contained in this message may be confidential 
 and is intended to be exclusively for the addressee. Should you 
 receive this message unintentionally, please do not use the contents 
 herein and notify the sender immediately by return e-mail.
 
 
 ==
 FAQ, list archives, and subscription info: 
 http://www.groupstudy.com/list/cisco.html
 Report misconduct 
 and Nondisclosure violations to [EMAIL PROTECTED]




Message Posted at:
http://www.groupstudy.com/form/read.php?f=7i=3738t=3735
--
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]