RE: 2611 Hardware issue

2000-05-31 Thread Winchester, Derek S.

Is this an active router or is it cold? Your Ios image might be bad.  Are
you sure about the IP address of the eo? With what is specified its hard to
narrow the problem

Derek S. Winchester
Sr. Wan Engineer 
Data Communications Department
[EMAIL PROTECTED]
Phone: 410-953-4887
Cell: 443-562-3456


-Original Message-
From: Kent [mailto:[EMAIL PROTECTED]]
Sent: Wednesday, May 31, 2000 11:39 AM
To: Todd Plambeck; Brandon Peyton; [EMAIL PROTECTED]
Subject: Re: 2611 Hardware issue


maybe I am asking the silly questions, did you try the
AUX?

Kent 
--- Todd Plambeck <[EMAIL PROTECTED]> wrote:
> >
> 
> You can try to ARP an address to one of the ethernet
> ports ( if you know
> the MAC address of the ethernet port ). This will
> obviously only work if
> the ethernet port is up ( link light will tell you
> ).
> 
> Good Luck
> 
> Todd
> 
> CCNP,CCDP
> 
> > Hi guys,
> >
> > Can anyone tell me what i can do with this router?
> >
> > I've got a 2611 who's console port seems to have
> died.
> > When i console into it i get strange ascii symbols
> > and then hangs.  I cant telnet from ethernet nor
> can
> > i ping its ethernet.
> >
> > The console port itself is clean and the console
> cable
> > is working fine ( works with other routers )
> >
> > Any ideas as to what i can do with this ?
> >
> > Is it fixable?  or trash now?
> >
> > Thanks
> > Brandon
> >
> >
>
---
> >   Brandon Peyton   UUNET
> MCIWorldcom
> >   Corporate Network Support3069
> Williams Dr.
> >   Senior Network Engineer  Fairfax, VA
> 22031-4648
> >   Voice:  703-744-2669 Email: 
> [EMAIL PROTECTED]
> >
>
---
> >
> > ___
> > UPDATED Posting Guidelines:
> http://www.groupstudy.com/list/guide.html
> > FAQ, list archives, and subscription info:
> http://www.groupstudy.com
> > Report misconduct and Nondisclosure violations to
> [EMAIL PROTECTED]
> 
> ___
> UPDATED Posting Guidelines:
> http://www.groupstudy.com/list/guide.html
> FAQ, list archives, and subscription info:
> http://www.groupstudy.com
> Report misconduct and Nondisclosure violations to
[EMAIL PROTECTED]


__
Do You Yahoo!?
Send instant messages & get email alerts with Yahoo! Messenger.
http://im.yahoo.com/

___
UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
FAQ, list archives, and subscription info: http://www.groupstudy.com
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]

___
UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
FAQ, list archives, and subscription info: http://www.groupstudy.com
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]



Re: 2611 Hardware issue

2000-05-31 Thread Kent

maybe I am asking the silly questions, did you try the
AUX?

Kent 
--- Todd Plambeck <[EMAIL PROTECTED]> wrote:
> >
> 
> You can try to ARP an address to one of the ethernet
> ports ( if you know
> the MAC address of the ethernet port ). This will
> obviously only work if
> the ethernet port is up ( link light will tell you
> ).
> 
> Good Luck
> 
> Todd
> 
> CCNP,CCDP
> 
> > Hi guys,
> >
> > Can anyone tell me what i can do with this router?
> >
> > I've got a 2611 who's console port seems to have
> died.
> > When i console into it i get strange ascii symbols
> > and then hangs.  I cant telnet from ethernet nor
> can
> > i ping its ethernet.
> >
> > The console port itself is clean and the console
> cable
> > is working fine ( works with other routers )
> >
> > Any ideas as to what i can do with this ?
> >
> > Is it fixable?  or trash now?
> >
> > Thanks
> > Brandon
> >
> >
>
---
> >   Brandon Peyton   UUNET
> MCIWorldcom
> >   Corporate Network Support3069
> Williams Dr.
> >   Senior Network Engineer  Fairfax, VA
> 22031-4648
> >   Voice:  703-744-2669 Email: 
> [EMAIL PROTECTED]
> >
>
---
> >
> > ___
> > UPDATED Posting Guidelines:
> http://www.groupstudy.com/list/guide.html
> > FAQ, list archives, and subscription info:
> http://www.groupstudy.com
> > Report misconduct and Nondisclosure violations to
> [EMAIL PROTECTED]
> 
> ___
> UPDATED Posting Guidelines:
> http://www.groupstudy.com/list/guide.html
> FAQ, list archives, and subscription info:
> http://www.groupstudy.com
> Report misconduct and Nondisclosure violations to
[EMAIL PROTECTED]


__
Do You Yahoo!?
Send instant messages & get email alerts with Yahoo! Messenger.
http://im.yahoo.com/

___
UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
FAQ, list archives, and subscription info: http://www.groupstudy.com
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]



RE: 2611 hardware issue P2

2000-05-30 Thread Buddy Venne

Brandon -
You said you can't telnet to it;try "show cdp neigbor detail" from a router
near it, maybe you will learn/find the ip address it has. Either that or cut
your losses and send it to me since it doesn't work any more.

Buddy Venne
WAN/LAN Specialist
Onyx Acceptance
(949) 465-3775


-Original Message-
From: Brandon Peyton [mailto:[EMAIL PROTECTED]]
Sent: Tuesday, May 30, 2000 6:38 PM
To: [EMAIL PROTECTED]
Subject: 2611 hardware issue P2


In addition the activity lights are functioning
and when plugged in to the LAN the activity flashes
the exact same as the other routers on the LAN

thanks in advance,
Brandon

---
  Brandon Peyton   UUNET MCIWorldcom
  Corporate Network Support3069 Williams Dr.
  Senior Network Engineer  Fairfax, VA 22031-4648
  Voice:  703-744-2669 Email:  [EMAIL PROTECTED]
---


___
UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
FAQ, list archives, and subscription info: http://www.groupstudy.com
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]

___
UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
FAQ, list archives, and subscription info: http://www.groupstudy.com
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]



Re: 2611 Hardware issue

2000-05-30 Thread Todd Plambeck

>

You can try to ARP an address to one of the ethernet ports ( if you know
the MAC address of the ethernet port ). This will obviously only work if
the ethernet port is up ( link light will tell you ).

Good Luck

Todd

CCNP,CCDP

> Hi guys,
>
> Can anyone tell me what i can do with this router?
>
> I've got a 2611 who's console port seems to have died.
> When i console into it i get strange ascii symbols
> and then hangs.  I cant telnet from ethernet nor can
> i ping its ethernet.
>
> The console port itself is clean and the console cable
> is working fine ( works with other routers )
>
> Any ideas as to what i can do with this ?
>
> Is it fixable?  or trash now?
>
> Thanks
> Brandon
>
> ---
>   Brandon Peyton   UUNET MCIWorldcom
>   Corporate Network Support3069 Williams Dr.
>   Senior Network Engineer  Fairfax, VA 22031-4648
>   Voice:  703-744-2669 Email:  [EMAIL PROTECTED]
> ---
>
> ___
> UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
> FAQ, list archives, and subscription info: http://www.groupstudy.com
> Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]

___
UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
FAQ, list archives, and subscription info: http://www.groupstudy.com
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]



Re: 2611 Hardware issue

2000-05-30 Thread Jay Hennigan

On Tue, 30 May 2000, Brandon Peyton wrote:

> Hi guys,
> 
> Can anyone tell me what i can do with this router?
> 
> I've got a 2611 who's console port seems to have died.
> When i console into it i get strange ascii symbols 
> and then hangs.  I cant telnet from ethernet nor can
> i ping its ethernet.
> 
> The console port itself is clean and the console cable
> is working fine ( works with other routers ) 
> 
> Any ideas as to what i can do with this ?

Try different speeds on your terminal emulator.  It sounds like the config
register may have gotten hosed.   Did you recently do a password recovery
on this box? 

Sometimes you can guess as to whether your speed is too high or too low
by the length of the lines of garbage.  

What happens if you set your terminal up 9600 N-8-1 and power-cycle the 
router, then send it a BREAK signal about 10 to 20 seconds after it starts 
booting?  Note: use a decent terminal emulator like TeraTerm or CRT, or 
minicom for Linux.  Hyperterminal is broken in various ways depending on 
the version when it comes to sending a BREAK.

> Is it fixable?  or trash now?

If you think it's trash, please deposit it in my trash can.  I'll even
pay the postage.  :-)

-- 
Jay Hennigan  -  Network Administration  -  [EMAIL PROTECTED] 
NetLojix Communications, Inc.  NASDAQ: NETX  -  http://www.netlojix.com/
WestNet:  Connecting you to the planet.  805 884-6323 

___
UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
FAQ, list archives, and subscription info: http://www.groupstudy.com
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]