The Micas don't beep.
Dave
Reza wrote:
Hi Group
I'm setting up a new Cisco As5300 NAS .
it has one 4 E1 Module and two mica 60 digital modem modules.
every thing is OK but when I dial-up to it , there is not any beep from the
modems .
I debuged the CAS , CSM on it , but I can't find the Problem
00:53:07: from Trunk(0): (0/8): Rx SEIZURE (ABCD=0001)
00:53:08: VDEV_ALLOCATE: 2/1 is allocated
00:53:08: 3.dsx0 call reset dnis_collected fap_notify
00:53:08: CSM_RX_CAS_EVENT_FROM_NEAT:(cid0008): EVENT_CALL_DIAL_IN at slot
2
and port 1
00:53:08: CSM_PROC_IDLE: CSM_EVENT_DSX0_CALL at slot 2, port 1
00:53:08: Mica Modem(2/1): Configure(0x1 = 0x0)
00:53:08: Mica Modem(2/1): Configure(0x23 = 0x2)
00:53:08: Mica Modem(2/1): Call Setup
00:53:08: csm_connect_pri_vdev: TS allocated at bp_stream 0, bp_Ch 7,
vdev_common 0x61B93DC8 2/1
00:53:08: to NEAT:(cid0008) EVENT_CHANNEL_LOCK for slot0 ctlr0 chan8
00:53:08: Mica Modem(2/1): State Transition to Call Setup
RM-NAS#
00:53:08: Mica Modem(2/1): Went offhook
00:53:08: CSM_PROC_IC2_RING: CSM_EVENT_MODEM_OFFHOOK at slot 2, port 1
00:53:08: cas_group=1, service=2
00:53:08: csm_res_response: service_type=0, fax_call=0, fap_notify=0
00:53:08: CSM_PROC_IC3_WAIT_FOR_RES_RESP: CSM_EVENT_RESOURCE_OK at slot 2,
port 1
00:53:08: CSM_RX_CAS_EVENT_FROM_NEAT:(0008): EVENT_START_RX_TONE at slot 2
and port 1
00:53:08: from Trunk(0): (0/8): Tx SEIZURE_ACK (ABCD=1101)
00:53:08: CSM_RX_CAS_EVENT_FROM_NEAT:(0008): EVENT_CHANNEL_CONNECTED at
slot 2 and port 1
00:53:08: CSM_PROC_IC6_WAIT_FOR_CONNECT: CSM_EVENT_DSX0_CONNECTED at slot
2,
port 1
00:53:08: Mica Modem(2/1): Link Initiate
00:53:08: from Trunk(0): (0/8): Tx ANSWERED (ABCD=0101)
00:53:09: Mica Modem(2/1): State Transition to Connect
00:53:13: from Trunk(0): (0/8): Rx IDLE (ABCD=1001)
00:53:14: Mica Modem(2/1): State Transition to Link
RM-NAS#
RM-NAS#
RM-NAS#
RM-NAS#
00:53:15: from Trunk(0): (0/8): Tx IDLE (ABCD=1001)
00:53:15: CSM_RX_CAS_EVENT_FROM_NEAT:(0008): EVENT_CALL_IDLE at slot 2
port
1 cause 200
00:53:15: CSM_PROC_IC7_OC6_CONNECTED: CSM_EVENT_DSX0_DISCONNECTED at slot
2,
port 1
00:53:15: Mica Modem(2/1): Link Terminate(0x6)
00:53:15: CSM(2/1): Enter csm_enter_disconnecting_state
00:53:15: VDEV_DEALLOCATE: slot 2 and port 1 is deallocated
00:53:15: Mica Modem(2/1): State Transition to Terminating
00:53:15: Mica Modem(2/1): State Transition to Idle
00:53:15: Mica Modem(2/1): Went onhook
00:53:15: CSM_PROC_IC8_OC8_DISCONNECTING: CSM_EVENT_MODEM_ONHOOK at slot 2,
port 1
00:53:15: CSM(2/1): Enter csm_enter_idle_state
00:53:15: from Trunk(0): (0/9): Rx SEIZURE (ABCD=0001)
00:53:15: VDEV_ALLOCATE: 2/2 is allocated
00:53:15: 3.dsx0 call reset dnis_collected fap_notify
00:53:15: CSM_RX_CAS_EVENT_FROM_NEAT:(cid0009): EVENT_CALL_DIAL_IN at slot
2
and port 2
00:53:15: CSM_PROC_IDLE: CSM_EVENT_DSX0_CALL at slot 2, port 2
00:53:15: Mica Modem(2/2): Configure(0x1 = 0x0)
00:53:15: Mica Modem(2/2): Configure(0x23 = 0x2)
00:53:15: Mica Modem(2/2): Call Setup
00:53:15: csm_connect_pri_vdev: TS allocated at bp_stream 0, bp_Ch 8,
vdev_common 0x61B95A30 2/2
00:53:15: to NEAT:(cid0009) EVENT_CHANNEL_LOCK for slot0 ctlr0 chan9
00:53:16: Mica Modem(2/2): State Transition to Call Setup
00:53:16: Mica Modem(2/2): Went offhook
00:53:16: CSM_PROC_IC2_RING: CSM_EVENT_MODEM_OFFHOOK at slot 2, port 2
00:53:16: cas_group=1, service=2
00:53:16: csm_res_response: service_type=0, fax_call=0, fap_notify=0
00:53:16: CSM_PROC_IC3_WAIT_FOR_RES_RESP: CSM_EVENT_RESOURCE_OK at slot 2,
port 2
00:53:16: CSM_RX_CAS_EVENT_FROM_NEAT:(0009): EVENT_START_RX_TONE at slot 2
and port 2
00:53:16: from Trunk(0): (0/9): Tx SEIZURE_ACK (ABCD=1101)
00:53:16: CSM_RX_CAS_EVENT_FROM_NEAT:(0009): EVENT_CHANNEL_CONNECTED at
slot 2 and port 2
00:53:16: CSM_PROC_IC6_WAIT_FOR_CONNECT: CSM_EVENT_DSX0_CONNECTED at slot
2,
port 2
00:53:16: Mica Modem(2/2): Link Initiate
00:53:16: from Trunk(0): (0/9): Tx ANSWERED (ABCD=0101)
00:53:17: Mica Modem(2/2): State Transition to Connect
00:53:22: Mica Modem(2/2): State Transition to Link
00:53:26: Mica Modem(2/2): State Transition to Trainup
00:53:34: Mica Modem(2/2): State Transition to Terminating
00:53:34: Mica Modem(2/2): State Transition to Idle
00:53:34: Mica Modem(2/2): Went onhook
00:53:34: CSM_PROC_IC7_OC6_CONNECTED: CSM_EVENT_MODEM_ONHOOK at slot 2,
port
2
00:53:34: CSM(2/2): Enter csm_enter_idle_state
00:53:34: VDEV_DEALLOCATE: slot 2 and port 2 is deallocated
00:53:34: from Trunk(0): (0/9): Tx BWD_CLEAR (ABCD=1101)
00:53:41: from Trunk(0): (0/9): Rx IDLE (ABCD=1001)
00:53:43: from Trunk(0): (0/9): Tx IDLE (ABCD=1001)
here is my running config :
spe 1/0 2/9
firmware location flash:mica-modem-pw.2.9.2.0.bin
!
controller E1 0
framing NO-CRC4
clock source line secondary 1
ds0-group 1 timeslots 1-15,17-31 type r2-digital
cas-custom 1
description E1 Demodulator 1
!
controller E1 1
framing NO-CRC4
