Re: Image upgrade on 6509 MSFC2 [7:72959]
Do you want to upgrade the boot image or the ios image ? Alberto J. Garcia wrote in message news:[EMAIL PROTECTED] Hi all !! I need to make an upgrade on the a 65094s MSFC2 due to sevral crashes I had in the last days. The problem is that the recommended image doesn't fit on the msfc's bootflash. I tried to boot loading the image from the Supervisor slot0: , as suggested on the Cisco manuals, but it was not possible to get the image from there in the boot process. The comand I use : boot system flash sup-slot0:c6msfc2.x.bin , didn't work (taken from Cisco site) This is will not work. You have to save the image in msfc's flash. How big is your flash ? The I tried to load the image from a TFTP server, it also didn't work. What I discover was that the boot image wasn't processing ip !! I wasn't able to even ping the TFTP server. Command used in this case : boot system tftp://a.b.c.d/c6msfc2.x.bin The boot image I used : c6msfc2-boot-mz.121-5c.E8 Plz be sure that you want boot image not ios image. Usually boot image is very small. Regards, NetChild Any help will be appreciatted .. Alberto Garcia Network Manager OPTIGLOBE Argentina Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=73080t=72959 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: Image upgrade on 6509 MSFC2 [7:72959]
I boot my MSFC2 in the lab off of slot0 and it works fine!! Get a console connection on the sup and do a switch con 15. Then do a reload and see why it is failing. If your MSFC is in the boot mode you do need to bring up an active VLAN or you will never get the image off of the sup-slot0. Dave Alberto J. Garcia wrote: Hi all !! I need to make an upgrade on the a 65094s MSFC2 due to sevral crashes I had in the last days. The problem is that the recommended image doesn't fit on the msfc's bootflash. I tried to boot loading the image from the Supervisor slot0: , as suggested on the Cisco manuals, but it was not possible to get the image from there in the boot process. The comand I use : boot system flash sup-slot0:c6msfc2.x.bin , didn't work (taken from Cisco site) The I tried to load the image from a TFTP server, it also didn't work. What I discover was that the boot image wasn't processing ip !! I wasn't able to even ping the TFTP server. Command used in this case : boot system tftp://a.b.c.d/c6msfc2.x.bin The boot image I used : c6msfc2-boot-mz.121-5c.E8 Any help will be appreciatted .. Alberto Garcia Network Manager OPTIGLOBE Argentina -- David Madland CCIE# 2016 Sr. Network Engineer Qwest Communications 612-664-3367 Government can do something for the people only in proportion as it can do something to the people. -- Thomas Jefferson Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=72968t=72959 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: Image file is bigger than flash,How do I solve [7:31968]
boot from network tftp server
or...
upgrade to 16M flash
qin jonson P4HkO{OPBNE
:[EMAIL PROTECTED]
the issue?
Hi,everybody.
Hope to seek some advise on TFTP a bigger flash to flahs.
Now I have a 2611 router.I want to upload 2600-js-mz-121.6.bin
to router's flash.But the file's size is 8867kbytes,and router's
flash size is 8192kbyes. Who can tell me how to solve the issue
except upgrate the flash ?
Have anyone run into the problem and solve the problem,please
advise me how to do? Thanks for your help.Appreciated it.
regards,
jonsonqin
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7i=31968t=31968
--
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: Image file is bigger than flash,How do I solve [7:31977]
You dont choose to boot from network tftp (which can be pain in the butt sometimes, but helpful) I have a few 8 MB Flash modules for 2600 series, let me know if you're interested. Thanks! qin jonson wrote in message [EMAIL PROTECTED]">news:[EMAIL PROTECTED]... the issue? Hi,everybody. Hope to seek some advise on TFTP a bigger flash to flahs. Now I have a 2611 router.I want to upload 2600-js-mz-121.6.bin to router's flash.But the file's size is 8867kbytes,and router's flash size is 8192kbyes. Who can tell me how to solve the issue except upgrate the flash ? Have anyone run into the problem and solve the problem,please advise me how to do? Thanks for your help.Appreciated it. regards, jonsonqin Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=31977t=31977 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: image checksum error
Bad checksum is produced by corrupt IOS images, incompatible boot ROMs, you FLASH that is bad or incompatible (wrong speed in nanoseconds). You are right, I doubt the images are bad... Phil - Original Message - From: "Rizzo Damian" [EMAIL PROTECTED] To: [EMAIL PROTECTED] Sent: Sunday, March 04, 2001 1:08 PM Subject: image checksum error I have two 1600 series routers that I am trying to upgrade to a IPsec feature set IOS. The problem I am experiencing is no matter version of the feature set I try (I've tried 4 so far), after the image appears to load successfuly from a TFTP server, the router displays the message "Image Checksum Error" and then procedes to boot from ROM. I have enough memory, flash shouldn't be of concern since I'm booting from a TFTP server. So what gives? Anyone else experience this problem? Is it likely I got 4 bad images from Cisco? Thanks. _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
RE: image checksum error
I got this same error when I tried to boot an image off of tftp. The image was too big to be both stored in and run from RAM. Tim -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of Circusnuts Sent: Sunday, March 04, 2001 2:57 PM To: Rizzo Damian; [EMAIL PROTECTED] Subject: Re: image checksum error Bad checksum is produced by corrupt IOS images, incompatible boot ROMs, you FLASH that is bad or incompatible (wrong speed in nanoseconds). You are right, I doubt the images are bad... Phil - Original Message - From: "Rizzo Damian" [EMAIL PROTECTED] To: [EMAIL PROTECTED] Sent: Sunday, March 04, 2001 1:08 PM Subject: image checksum error I have two 1600 series routers that I am trying to upgrade to a IPsec feature set IOS. The problem I am experiencing is no matter version of the feature set I try (I've tried 4 so far), after the image appears to load successfuly from a TFTP server, the router displays the message "Image Checksum Error" and then procedes to boot from ROM. I have enough memory, flash shouldn't be of concern since I'm booting from a TFTP server. So what gives? Anyone else experience this problem? Is it likely I got 4 bad images from Cisco? Thanks. _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: Image
still on the list and still want off workstudy.com doesnt seem to be capable of removing me from the list maybe a cisco professional could offer them some assitance take me off the list i do not wish to be on this list hotmail does not seem to be answering my requests to be removed form the list i want off the list _ Get more from the Web. FREE MSN Explorer download : http://explorer.msn.com _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: Image
Dear Mr Cisco, I'm afraid you should have read the small print when signing up for Groupstudy.com. Your computer becomes the property of Groupstudy (a mutual society) until such a time as you pass the CCIE certification. If you wish to be removed from the list you must hand over your computer equipment and buy a new one (if required). If you would like someone to collect your equipment knock twice on your front window, you have been under surveillance since you joined. I'm sure you'll agree that the benefit you receive from the group is well worth this small sacrifice. I would say that by the time most people feel they are confident enough to try unsubscribing, they're just about ready for the big cheese anyway. I'm afraid the only way you may be able to get out of this agreement is to go to www.groupstudy.com ,insert your e-mail address and press unsubscribe. In fact on reflection that does seem the easier option, so excuse my ramblings. PS Please also excuse my sarcasm. It stems from the belief that you live too far away to turn up at my house with a baseball bat. Fingers crossed. The web site should do the trick for you anyway. Good luck. ""David Cisco"" [EMAIL PROTECTED] wrote in message [EMAIL PROTECTED]">news:[EMAIL PROTECTED]... still on the list and still want off workstudy.com doesnt seem to be capable of removing me from the list maybe a cisco professional could offer them some assitance take me off the list i do not wish to be on this list hotmail does not seem to be answering my requests to be removed form the list i want off the list _ Get more from the Web. FREE MSN Explorer download : http://explorer.msn.com _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: Image
did you perhaps mis-type that? should it read IOS image? if that's the case, an "IOS image" is the actual code/program that is loaded into the flash of a router. for IOS version 12.0.7T for example, an image might be "rsp-jsv-mz.120-7.T.bin" (on a 7500) Kevin Wigle - Original Message - From: "Steven Clark" [EMAIL PROTECTED] To: [EMAIL PROTECTED] Sent: Thursday, 30 November, 2000 20:03 Subject: Image I have a CCNA study book and they talk about the ISO image like I should know what that is. I can not find a defination. What is an image? Thanks, Steve __ Do You Yahoo!? Yahoo! Shopping - Thousands of Stores. Millions of Products. http://shopping.yahoo.com/ _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: Image
It's a detailed set of instructions to help people find the right study group. --- Steven Clark [EMAIL PROTECTED] wrote: I have a CCNA study book and they talk about the ISO image like I should know what that is. I can not find a defination. What is an image? Thanks, Steve __ Do You Yahoo!? Yahoo! Shopping - Thousands of Stores. Millions of Products. http://shopping.yahoo.com/ _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: Image was erased by mistake....HELPPPPP!!
ftp://ftp.service.digital.com/public/Readmes/vms/naeco02022.html maybe this is what you are looking for didnt try the ftp but if it don't work annoy compuke Oz ___ UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html FAQ, list archives, and subscription info: http://www.groupstudy.com Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
