Re: Interface errors [7:34461]
Mt first guess is a timing issue with CO or dirty line. Joaquim Lopes wrote in message [EMAIL PROTECTED]">news:[EMAIL PROTECTED]... Hi, what could cause this errors? Serial0/0 is up, line protocol is up Hardware is DSCC4 Serial Internet address is 10.172.1.2/30 MTU 1500 bytes, BW 2048 Kbit, DLY 2 usec, reliability 255/255, txload 1/255, rxload 3/255 Encapsulation PPP, loopback not set Keepalive set (10 sec) LCP Open Listen: CDPCP Open: IPCP Last input 00:00:00, output 00:00:00, output hang never Last clearing of show interface counters 2w4d Input queue: 0/75/337 (size/max/drops); Total output drops: 21 Queueing strategy: weighted fair Output queue: 0/1000/64/21 (size/max total/threshold/drops) Conversations 0/60/256 (active/max active/max total) Reserved Conversations 0/0 (allocated/max allocated) 5 minute input rate 29000 bits/sec, 8 packets/sec 5 minute output rate 12000 bits/sec, 9 packets/sec 13153011 packets input, 1756696209 bytes, 0 no buffer Received 0 broadcasts, 0 runts, 0 giants, 4066 throttles 3230 input errors, 222 CRC, 3008 frame, 0 overrun, 0 ignored, 0 abort 12955327 packets output, 2923854785 bytes, 0 underruns 0 output errors, 0 collisions, 160 interface resets 0 output buffer failures, 0 output buffers swapped out 0 carrier transitions DCD=up DSR=up DTR=up RTS=up CTS=up Thanks Joaquim Lopes Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=34462t=34461 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: Interface errors [7:34461]
Joaquim, I had a similar problem with CRC and Frame alignment errors that turned out to be a bad CSD/DSU. It looks like you might be experiencing this as well, especially given the number of interface resets. - Tom In article , Joaquim Lopes wrote: Hi, what could cause this errors? Serial0/0 is up, line protocol is up Hardware is DSCC4 Serial Internet address is 10.172.1.2/30 MTU 1500 bytes, BW 2048 Kbit, DLY 2 usec, reliability 255/255, txload 1/255, rxload 3/255 Encapsulation PPP, loopback not set Keepalive set (10 sec) LCP Open Listen: CDPCP Open: IPCP Last input 00:00:00, output 00:00:00, output hang never Last clearing of show interface counters 2w4d Input queue: 0/75/337 (size/max/drops); Total output drops: 21 Queueing strategy: weighted fair Output queue: 0/1000/64/21 (size/max total/threshold/drops) Conversations 0/60/256 (active/max active/max total) Reserved Conversations 0/0 (allocated/max allocated) 5 minute input rate 29000 bits/sec, 8 packets/sec 5 minute output rate 12000 bits/sec, 9 packets/sec 13153011 packets input, 1756696209 bytes, 0 no buffer Received 0 broadcasts, 0 runts, 0 giants, 4066 throttles 3230 input errors, 222 CRC, 3008 frame, 0 overrun, 0 ignored, 0 abort 12955327 packets output, 2923854785 bytes, 0 underruns 0 output errors, 0 collisions, 160 interface resets 0 output buffer failures, 0 output buffers swapped out 0 carrier transitions DCD=up DSR=up DTR=up RTS=up CTS=up Thanks Joaquim Lopes misconduct and Nondisclosure violations to [EMAIL PROTECTED] Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=34466t=34461 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
RE: Interface errors [7:34461]
Make sure the dulplex is set correctly, full/half etc. -Original Message- From: Tom Martin [SMTP:[EMAIL PROTECTED]] Sent: 05 February 2002 15:58 To: Subject: Re: Interface errors [7:34461] Joaquim, I had a similar problem with CRC and Frame alignment errors that turned out to be a bad CSD/DSU. It looks like you might be experiencing this as well, especially given the number of interface resets. - Tom In article , Joaquim Lopes wrote: Hi, what could cause this errors? Serial0/0 is up, line protocol is up Hardware is DSCC4 Serial Internet address is 10.172.1.2/30 MTU 1500 bytes, BW 2048 Kbit, DLY 2 usec, reliability 255/255, txload 1/255, rxload 3/255 Encapsulation PPP, loopback not set Keepalive set (10 sec) LCP Open Listen: CDPCP Open: IPCP Last input 00:00:00, output 00:00:00, output hang never Last clearing of show interface counters 2w4d Input queue: 0/75/337 (size/max/drops); Total output drops: 21 Queueing strategy: weighted fair Output queue: 0/1000/64/21 (size/max total/threshold/drops) Conversations 0/60/256 (active/max active/max total) Reserved Conversations 0/0 (allocated/max allocated) 5 minute input rate 29000 bits/sec, 8 packets/sec 5 minute output rate 12000 bits/sec, 9 packets/sec 13153011 packets input, 1756696209 bytes, 0 no buffer Received 0 broadcasts, 0 runts, 0 giants, 4066 throttles 3230 input errors, 222 CRC, 3008 frame, 0 overrun, 0 ignored, 0 abort 12955327 packets output, 2923854785 bytes, 0 underruns 0 output errors, 0 collisions, 160 interface resets 0 output buffer failures, 0 output buffers swapped out 0 carrier transitions DCD=up DSR=up DTR=up RTS=up CTS=up Thanks Joaquim Lopes misconduct and Nondisclosure violations to [EMAIL PROTECTED] Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=34468t=34461 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
RE: Interface errors [7:34461]
This is the Cisco definitive link on errors you see when doing a show interface serial x command. I have referenced it many times working with PacBell. http://www.cisco.com/warp/public/112/chapter15.htm Good luck! James Casey, Paul (6822) wrote: Make sure the dulplex is set correctly, full/half etc. -Original Message- From: Tom Martin [SMTP:[EMAIL PROTECTED]] Sent: 05 February 2002 15:58 To: Subject:Re: Interface errors [7:34461] Joaquim, I had a similar problem with CRC and Frame alignment errors that turned out to be a bad CSD/DSU. It looks like you might be experiencing this as well, especially given the number of interface resets. - Tom In article , Joaquim Lopes wrote: Hi, what could cause this errors? Serial0/0 is up, line protocol is up Hardware is DSCC4 Serial Internet address is 10.172.1.2/30 MTU 1500 bytes, BW 2048 Kbit, DLY 2 usec, reliability 255/255, txload 1/255, rxload 3/255 Encapsulation PPP, loopback not set Keepalive set (10 sec) LCP Open Listen: CDPCP Open: IPCP Last input 00:00:00, output 00:00:00, output hang never Last clearing of show interface counters 2w4d Input queue: 0/75/337 (size/max/drops); Total output drops: 21 Queueing strategy: weighted fair Output queue: 0/1000/64/21 (size/max total/threshold/drops) Conversations 0/60/256 (active/max active/max total) Reserved Conversations 0/0 (allocated/max allocated) 5 minute input rate 29000 bits/sec, 8 packets/sec 5 minute output rate 12000 bits/sec, 9 packets/sec 13153011 packets input, 1756696209 bytes, 0 no buffer Received 0 broadcasts, 0 runts, 0 giants, 4066 throttles 3230 input errors, 222 CRC, 3008 frame, 0 overrun, 0 ignored, 0 abort 12955327 packets output, 2923854785 bytes, 0 underruns 0 output errors, 0 collisions, 160 interface resets 0 output buffer failures, 0 output buffers swapped out 0 carrier transitions DCD=up DSR=up DTR=up RTS=up CTS=up Thanks Joaquim Lopes misconduct and Nondisclosure violations to [EMAIL PROTECTED] Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=34470t=34461 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: Interface errors [7:34461]
Kick yourself...now..Serial Interface Casey, Paul (6822) wrote in message [EMAIL PROTECTED]">news:[EMAIL PROTECTED]... Make sure the dulplex is set correctly, full/half etc. -Original Message- From: Tom Martin [SMTP:[EMAIL PROTECTED]] Sent: 05 February 2002 15:58 To: Subject: Re: Interface errors [7:34461] Joaquim, I had a similar problem with CRC and Frame alignment errors that turned out to be a bad CSD/DSU. It looks like you might be experiencing this as well, especially given the number of interface resets. - Tom In article , Joaquim Lopes wrote: Hi, what could cause this errors? Serial0/0 is up, line protocol is up Hardware is DSCC4 Serial Internet address is 10.172.1.2/30 MTU 1500 bytes, BW 2048 Kbit, DLY 2 usec, reliability 255/255, txload 1/255, rxload 3/255 Encapsulation PPP, loopback not set Keepalive set (10 sec) LCP Open Listen: CDPCP Open: IPCP Last input 00:00:00, output 00:00:00, output hang never Last clearing of show interface counters 2w4d Input queue: 0/75/337 (size/max/drops); Total output drops: 21 Queueing strategy: weighted fair Output queue: 0/1000/64/21 (size/max total/threshold/drops) Conversations 0/60/256 (active/max active/max total) Reserved Conversations 0/0 (allocated/max allocated) 5 minute input rate 29000 bits/sec, 8 packets/sec 5 minute output rate 12000 bits/sec, 9 packets/sec 13153011 packets input, 1756696209 bytes, 0 no buffer Received 0 broadcasts, 0 runts, 0 giants, 4066 throttles 3230 input errors, 222 CRC, 3008 frame, 0 overrun, 0 ignored, 0 abort 12955327 packets output, 2923854785 bytes, 0 underruns 0 output errors, 0 collisions, 160 interface resets 0 output buffer failures, 0 output buffers swapped out 0 carrier transitions DCD=up DSR=up DTR=up RTS=up CTS=up Thanks Joaquim Lopes misconduct and Nondisclosure violations to [EMAIL PROTECTED] Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=34477t=34461 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: Interface errors [7:34461]
Steven A. Ridder wrote: Mt first guess is a timing issue with CO or dirty line. Agreed. I would have the telco test the line with that many errors. It is possible that it's a bad CSU/DSU or even a bad cable (RJ-48 to the CSU/DSU or V.35 from the CSU to the router), but you can replace those things and if you still get the errors, call the telco. Mike W. Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=34519t=34461 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
