Re: L3 Between VLANS- no RSM or MSFC [7:44462]
If you want to do it really simply, just use a router that has 2 ethernet interfaces. ""Phil Lorenz"" wrote in message [EMAIL PROTECTED]">news:[EMAIL PROTECTED]... > I'm looking to mock up RSM/ MSFC type routing between VLANs. > > > > If my memory serves me correctly, can't I do this with a 4500 (or > better) router outfitted with an FE module ??? > > > > Can anyone elaborate and/ or offer a few clues to get me researching in > the right area ??? > > > > Thanks !!! > > Phil Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=44468&t=44462 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: L3 Between VLANS- no RSM or MSFC [7:44462]
But if he's trying to practice doing FastEthernet VLAN trunking. =) But I agree, if you're looking to simply route, get a router with 2 ethernet interfaces and connect one to each VLAN. if you need to route between more than 2 VLANs, then you'll need a router that supports trunking on the FastEthernet port (I know the 4000 series supports this, but not for sure about anything lower. wouldn't be surprised if the 2600/3600 series supported this) Mike W. "nrf" wrote in message [EMAIL PROTECTED]">news:[EMAIL PROTECTED]... > If you want to do it really simply, just use a router that has 2 ethernet > interfaces. > > > > ""Phil Lorenz"" wrote in message > [EMAIL PROTECTED]">news:[EMAIL PROTECTED]... > > I'm looking to mock up RSM/ MSFC type routing between VLANs. > > > > > > > > If my memory serves me correctly, can't I do this with a 4500 (or > > better) router outfitted with an FE module ??? > > > > > > > > Can anyone elaborate and/ or offer a few clues to get me researching in > > the right area ??? > > > > > > > > Thanks !!! > > > > Phil Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=44470&t=44462 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
RE: L3 Between VLANS- no RSM or MSFC [7:44462]
A 2600 with a FE interface will do trunking and be the router on a stick. I haven't tried a 3600 but it should work as well. -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of Michael L. Williams Sent: Saturday, May 18, 2002 7:35 PM To: [EMAIL PROTECTED] Subject: Re: L3 Between VLANS- no RSM or MSFC [7:44462] But if he's trying to practice doing FastEthernet VLAN trunking. =) But I agree, if you're looking to simply route, get a router with 2 ethernet interfaces and connect one to each VLAN. if you need to route between more than 2 VLANs, then you'll need a router that supports trunking on the FastEthernet port (I know the 4000 series supports this, but not for sure about anything lower. wouldn't be surprised if the 2600/3600 series supported this) Mike W. "nrf" wrote in message [EMAIL PROTECTED]">news:[EMAIL PROTECTED]... > If you want to do it really simply, just use a router that has 2 ethernet > interfaces. > > > > ""Phil Lorenz"" wrote in message > [EMAIL PROTECTED]">news:[EMAIL PROTECTED]... > > I'm looking to mock up RSM/ MSFC type routing between VLANs. > > > > > > > > If my memory serves me correctly, can't I do this with a 4500 (or > > better) router outfitted with an FE module ??? > > > > > > > > Can anyone elaborate and/ or offer a few clues to get me researching in > > the right area ??? > > > > > > > > Thanks !!! > > > > Phil Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=44474&t=44462 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
RE: L3 Between VLANS- no RSM or MSFC [7:44462]
The answer is router on a stick, make a trunk from the router to the switch and setup the vlans on the router as subinterfaces. Rah -Original Message- From: Phil Lorenz [mailto:[EMAIL PROTECTED]] Sent: 19 May 2002 00:45 To: [EMAIL PROTECTED] Subject: L3 Between VLANS- no RSM or MSFC [7:44462] I'm looking to mock up RSM/ MSFC type routing between VLANs. If my memory serves me correctly, can't I do this with a 4500 (or better) router outfitted with an FE module ??? Can anyone elaborate and/ or offer a few clues to get me researching in the right area ??? Thanks !!! Phil Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=44475&t=44462 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
RE: L3 Between VLANS- no RSM or MSFC [7:44462]
Just remember that each VLAN is a seperate subnet. Setup a trunk on the switch(must be fast ethernet and ISL capable. Then setup sub-interfaces on router and encapsulation ISL this will cause the routers fast ethernet to be a trunk The 4000 fast e module on ebay is like 800 you can get a 2620 for 1100 so I went with the 2620 and besides you can put voice ports in the 2620. int fa0/0.1 encapsulation ISL 1 ip address 10.0.1.1 255.255.255.0 int fa0/0.2 encapsulation ISL 2 ip address 10.0.2.1 255.255.255.0 int fa0/0.3 encapsulation ISL 3 ip address 10.0.3.1 255.255.255.0 router rip network 10.0.0.0 Any workstation on VLAN 1 will be on the 10.0.1.0 subnet with a default gateway of 10.0.1.1 encap ISL 1 uses vlan 1 encap ISL 2 uses vlan 2 these must match your vlans HTH Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=44524&t=44462 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]