Are you using all cisco equipment or are you mixing cisco with other
vendors? If you are using multiple vendors, make sure the sap and rip
updates are happening at the same time. (either when changes are made, or
every so many seconds) a lot of vendors' default configs are to allow
updates when changes are made, where cisco is every so many seconds. Either
will work, but both have to be configured the same. If they aren't you'll
have sporadic problems and neither equipment will hold sap and rip updates
properly.
-Patrick
Keith Townsend 07/11/01 05:59PM
Where are you seeing the two different trees. Are you seeing them from
Display Servers or from the SAP list on the router or from a Netware Client.
If you are seeing this from a Router or Server this is pretty normal. But
if you are seeing this from the client then this points to a communications
problem between the Servers or a NDS corruption. Try doing a Reset Router
on all the NetWare boxes within 15 seconds of each other. Then try running
DSRepairs on each individual box that has a copy of the DS. Start with the
Master.
I hope this helps.
Keith Townsend
MCSE, CNE, CCNA
AISA Technologies
312-629-1100
www.aisatech.com
nusrat khwaja wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
1. One of my Netware5 server is showing two NDS trees instead of our
single
tree. The only difference is that the name of the real one is : a-b and
the
other one shown is a|b. a|b can not be opened but a-b is working.
2. At the same time, SHO IPX server on a Netware5 server shows only a few
IPX
servers but if I RESET ROUTER it shows all my IPX servers but only for
about
15
minutes and then all except a few ipx servers disappear from sho ipx
server.
What could be wrong ??
_
Do You Yahoo!?
Get your free @yahoo.com address at http://mail.yahoo.com
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7i=12130t=12020
--
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
